Kit scooter motor electric wheel 750W - 100W without battery

Brushless wheel motor kit suitable for scooters with 20", 24", 26" or 28" wheels. Easily installed on many brands such as Trottrx, Globe3T, black mountain, gravity...

More details

Contenu de ce pack:

Quantité : 1
269,00 €

Info Bulle

Quantité : 1
211,20 €
  • Rim adapted to your scooter
  • Inox
  • Black
  • Yes

Info Bulle

Quantité : 1
119,00 €
  • 36V / 48V

Quantité : 2
50,00 €

Quantité : 1
30,00 €
  • 100cm

Quantité : 1
Gratuit
  • classic pack

000749

New product

Limited special offer

699,20 €
ou 3 x 236,91 €

709,20 €

-10,00 €

- +

 
More info

THE ADVANTAGES OF THE 1000W SCOOTER KIT

Electric wheel motor kit suitable for use on urban or off-road scooters with 20 '', 24 '', 26 '' or 28 '' wheels. delivered here without battery for those who already have a 36V or 48V battery on their bike. No need to choose the teniosn this kit works under 36V and 48V. The 48V brings 8km / h more in top speed and 15% more torque. 750W of power at 36V and 1000W at 48V

THE "DONKEY" ENGINE


The "Donkey"   motor is a reduction motor with reinforced planetary gear and internal freewheel. 

The "Donkey" motor  is supplied with lock washers which will allow you to center the wheel in your frame. It can be installed on all traditional frames equipped with a front axle with 100mm center distance.

You can screw your standard 6-hole brake disc onto the motor. 

With your kit you receive a  complete drive wheel.  All our wheels are carefully radiated in our workshop by enthusiasts: spoke tension, centering, runout and runout, everything is checked before shipment.

The 36 spokes are made of stainless steel, 2.3mm in diameter, made in France.

 These French-made rims will allow you to use your kit in all conditions.

THE 25A CONTROLLER


The  25A controller  is very easy to install. Each connector has a key, you have no risk of making a mistake.

This controller is only compatible with all OZO batteries

THE THUMB TRIGGER ACCELERATOR

The accelerator  offers the possibility of controlling the engine without pedaling. 

In the form of a thumb trigger, the throttle can be installed on the right or left of the handlebars.

Note, however, that the accelerator is not approved for driving on a road open to traffic. 


THE TORQUE ARM

The torque arm  is a laser-cut stainless steel part that prevents loosening of the drive wheel fixing nuts so as not to damage the frame of your scooter.

The torque arm is essential with the 750W - 1000W Scooter kit.

To choose the right model for your scooter, OZO will select the most suitable model for you.

OPTIONAL ACCESSORIES

OZO has been manufacturing 36V PVC Lithium batteries in France since 2013 from high-end Panasonic cells with integrated BMS.

Choose the autonomy of your electric bike by choosing a 36V battery from our wide range of batteries from 500Wh to 1000Wh.

2 years warranty

This charger is  one of the lightest on the market , with its 200g, it is as light as the latest smartphones. Ideal to carry it everywhere with you on your expeditions and your travels.

Totally silent , you can recharge your battery without being disturbed.

This charger is designed to charge Lithium batteries with a nominal voltage of 36V and 42V max.

IS THIS MOTOR COMPATIBLE WITH MY SCOOTER?

The wheel kit  is compatible with all scooters equipped with a 9x100mm or 10x100mm front wheel axle.

To be sure that the installation is possible on your bike, you must check that you have a traditional frame open with 100mm center distance.

With a ruler, measure the inside width of your frame (value A). You must have at least 100mm (10cm).

Then measure the frame notches (value B). You must have 9 or 10mm.

 
Data sheet
Garantie2 ans
Couple max sur roue de 26 pouces100 N.m
Intensité max25A
Puissance750W - 1000W
Rendement82%
Puissance max250W
Cable de puissance3mm²
Diamètre de roue mini16"
Tension Max36V

Accessories

Menu