Kit scooter motor electric wheel 750W with battery frame 36V
Electrify easily your scooter with this electric wheel motor kit 20'', 24'', 26'' or 28 inches of 750W of power delivered with a 36V battery which is fixed on the frame. Electric wheel motor with 60N.m of torque
Contenu de ce pack:
 | DONKEY Motor Quantité : 1 269,00 € |
 | Donkey wheelbuilding on double wall rim with 2.3 mm stainless steel spokes |
 | Controller 25A 12V 24V 36V 48V dual sensored sensorless for brushless motor |
 | Thumb throttle for OZO ebikes kits 1000W and 1500W Quantité : 1 20,00 € |
 | Torque arm adapted to your bike Quantité : 2 50,00 € |
 | Rallonge moteur 9 pins / Anderson + JST Quantité : 1 30,00 € |
 | 36V Lithium battery frame shape from 250Wh to 700Wh |
 | 36V 2A and 4A charger for Lithium LiMn batteries Quantité : 1 32,90 € |
 | Mounting pack for electric kit Quantité : 1 Gratuit |
THE ADVANTAGES OF THE 750W SCOOTER KIT
A ready-to-use kit that delivers 60N.m of torque. You choose the autonomy you want by selecting the capacity of the PVC battery that you can install in a backpack in order to have a lighter and more manageable electric scooter. This electric wheel motor kit is notably compatible with all-terrain scooters from Gravity, Globe3T, Blackmountain, Trotrx, or urban ones like kickbike, footbike, yedoo
THE "DONKEY" ENGINE
The "Donkey" motor is a reduction motor with reinforced planetary gear and internal freewheel. The "Donkey" motor is supplied with lock washers which will allow you to center the wheel in your frame. It can be installed on all traditional frames equipped with a front axle with 100mm center distance. You can screw your standard 6-hole brake disc onto the motor. |  |
| With your kit you receive a complete drive wheel. All our wheels are carefully radiated in our workshop by enthusiasts: spoke tension, centering, runout and runout, everything is checked before shipment. The 36 spokes are made of stainless steel, 2.3mm in diameter, made in France. These French-made rims will allow you to use your kit in all conditions. |
THE 25A CONTROLLER
| The 25A controller is very easy to install. Each connector has a key, you have no risk of making a mistake. This controller is only compatible with all OZO batteries |
FRAME BATTERIES
These batteries have a shroud that protects them from shocks, dust and water . This fairing also offers good protection against theft thanks to a lock that allows the battery to be locked on the frame of the scooter using a key. An autonomy gauge and an ON / OFF switch are integrated into the battery.
In order to meet all autonomy needs, OZO offers a wide choice of capacities , from 500Wh to 1000Wh.
The choice of battery capacity should be made according to the autonomy you want. For example, a 500Wh battery, will offer you approximately 50Km of autonomy without forcing and up to 100Km depending on your effort. A 1000Wh battery will give you double the autonomy.
 |
You will find all the batteries dimensions "frame" in the tab " Documentation " and the detailed description on the page " framework Battery 36V " |
THE CHARGER
 | This charger is one of the lightest on the market , with these 200g. Ideal to carry it everywhere with you on your expeditions and your travels. Totally silent , you can recharge your battery without being disturbed. This charger is designed to charge Lithium batteries with a nominal voltage of 36V. |
THE THUMB TRIGGER ACCELERATOR
The accelerator offers the possibility of controlling the engine without pedaling. In the form of a thumb trigger, the throttle can be installed on the right or left of the handlebars. Note, however, that the accelerator is not approved for driving on a road open to traffic. |  |
THE TORQUE ARM
 | The torque arm is a laser-cut stainless steel part that prevents loosening of the drive wheel fixing nuts so as not to damage the frame of your scooter. The torque arm is essential with the 750W Scooter kit. To choose the right model for your scooter, OZO will select the most suitable model for you. |
IS THIS MOTOR COMPATIBLE WITH MY SCOOTER?
The wheel kit is compatible with all scooters equipped with a 9x100mm or 10x100mm front wheel axle. To be sure that the installation is possible on your bike, you must check that you have a traditional frame open with 100mm center distance. With a ruler, measure the inside width of your frame (value A). You must have at least 100mm (10cm). Then measure the frame notches (value B). You must have 9 or 10mm. |  |
| Garantie | 2 ans |
| Couple max sur roue de 26 pouces | 100 N.m |
| Intensité max | 25A |
| Tension nominale | 36V |
| Rendement | 82% |
| Puissance max | 250W |
| Cable de puissance | 3mm² |
| Diamètre de roue mini | 16" |
| Tension Max | 36V |
