Kit Cargo 750W-1000W

The Cargo kit includes :

  • 1x drive wheel with DD27 dimensioned on the rim of your choice.

  • 1x accelerator half twist throttle or thumb throttle or pedal sensor

  • 1x OZO 22A Controller dual sensored/sensorless

  • 1x mounting pack

  • 1x high pressure rim tape

More details

From
489,00 €

In Stock

Free delivery

Payment in 3X

Expert after-sales service

Preparation time: 5 to 10 working days

Warranty 2 years

Secure payment : by CB, check or transfer

Presentation

The bike OZO Cargo DD27 is developped to carry very heavy weights like : cargo bike, trike, taxi bike...

The dd27 Cargo is a direct drive motor really strong to absorb shocks.

The stator width is 35mm instead of 27mm to gain more couple.

Don't forget to get a torque arm with your kit : Please look at the guide to choose your torque arm ->  Torque arm

BACK CARGO MOTOR

The front motor Speedster DD27 is a motor with direct drive derivates from electric motor scooter. With a rock-solid reliability, this motor is really great value for its price and the performances you get.

The DD27 is equipped of a screw thread provided to receive a freewheel to screw to 5, 6, 7, 8, 9 or 10 speeds.

It’s perfect for a daily generalist use on cargo, tricycle, tandem but also machine where it’s not possible to pedal such as scooter.

It’s the first choice of scooter renter.

You can use this motor with a sensored/sensorless controller, but for a maximum efficiency and the best effectiveness

We advise you to supply it with our OZO controller FOC 25A.

The back-motor Speedster DD27 free wheel will be perfect if your native transmission has 7 or 8 speeds.

Please favor the back motor DD27 with cassette if your transmission has 9 or 10 speeds.

The 36 rays are in stainless steel of 2,3mm diameter made in France. For engage use, we are advice you to choose a rack on a mountain bike wheel such as the KLIXX or the MAD.

Theses rim are French made and will allow you to use your kite in every situation

Jante magma ozo kit speed rh 205C

With your kit, you’ll receive a driving wheel complete. All our wheels are carefully radiated in our French workshops by passionate mechanics:

Spoke tension, centering, veil and fake round, everything is controlled before sending.

Please note that we do not propose entry-level rim with this motor due to his important mass to avoid all warping risks.

For bikes equipped with skid brake, we recommend the Mach1 Kargo rim. Your wheel will be perfectly radiated in our French workshop.

For bikes equipped with brake disks we recommend you to choose between the Magma and the Mad rim. Those are freeride rims, with strengthened side with eyelet. By choosing this option, you’ll benefit a French made radiated rim and a great relatability.

22A CONTROLLER

The 22A controller is delivered with a JULET wire totally waterproof and very easy to install. Every wire has a wire coding system, so you cannot go wrong.

The principal wiring harness is for the OZO 22A controller.

Julet connector 9-ways 80cm

2 RED connectors

1 GREEN connector

1 YELLOW connector

Compatible with all e-bikes disposing of the JULET connector 9-ways

Example : Nakamura, Kunteng, Gosport, Norauto, Peugeot

3 DISPLAYS TO CHOOSE


Handlebar housing LED 890 for OZO wheel motor electric kit 22A

Compatible with a lot of e-bikes : Cycoo V-5500, TopLife V-5500, Makadam E-Mountain/E-Forest/E-Vortex /Nakamura.

It will allow you to :

  • Select the electric assistance mode (null, low, medium, high)

  • To control your autonomy through the battery autonomy gauge/meter

  • Have the pedestrian mode that assures you to have a continue assistance of 6km/h (3,72 mile/h). It’s ideal for pedestrian zone.

Handlebar housing LCD1

Compatible with all OZO wheel motor electric kit 22A

Compatible with a lot of bike with electric assistance : nakamura, carrefour, gosport, décathlon, easybikeCycoo V-5500, TopLife V-5500, Makadam E-Mountain/E-Forest/E-Vortex.

It will allow you to :

  • To control your autonomy through the LCD battery autonomy gauge/meter

  • Select the electric assistance mode (1 to 5)

  • To display your speed and distance travelled

Handlebar housing LCD1

Compatible with all OZO wheel motor electric kit 22A

Also compatible withbikes with electric assistance :  Cycoo V-5500, TopLife V-5500, Makadam E-Mountain/E-Forest/E-Vortex / Nakamura.

It proposes the same functionalities of the LCD1 but with:

  • Display of instantaneous power

  • Display of the motor and exterior temperature

  • Display of the battery tension

  • The possibily to recharge your phone or to plug a GPS via USB.

THE PEDAL SENSOR

For every wheel motor kit including 22A controller, you’ll necessarily have a pedal sensor. It allow to engage the motor and then, the electric assistance of your bike.

The pedal sensor is a rotation sensor. You are required to pedal to get the electric assistance. There are multiple type of sensor to correspond to 90% of bike on the market.

Integrated pedal sensor: For chain set housing of squared axis having a minimum 4mm gap between the crank and the frame.

Pedal sensor with magnetic disk: For other bikes which don’t have a minimum gap to install an integrate sensor.

BOX BATTERY  OR PVC

You’ll have to supply your Enduro wheel motor kit with a 36V or 48V battery. Every 36V or 48V OZO batteries are compatible with this motor.

The capacity choice is done in function of the wanted autonomy. For example, a 500Wh battery will offer you around 50km (31 mile) of autonomy without forcing the bike to 100km (62 mile) in function of your effort. A 1000Wh battery will offer you the double of autonomy.

The second criteria is to know where do you want to install your battery on your bike. For that

We are proposing you two versions of battery: Box battery and PVC battery.

Offer a protection against humidity, rain, impacts and dust and allow you to lock the battery.

Please verify the dimensions of the battery by going directly on the concerned product sheet.

They are lighter and less costing. But you’ll have to installer it in a backpack or in a cover to assure it protection. Using them in backpack is for electric mountain bike or with electric assistance. Because the bike is lighter so more manageable.

OPTIONALS ACCESSORIES

Accelerator : Allow you the possibility to drive your bike without pedaling. We advise you to use it on mountain bike to help with obstacles crossing and hill starts.

Brake cutoff : It’s not necessary for the proper functioning of your motorization. But it offers you an additional security by lowering the system when braking. It’s highly recommended to use it if you have a speed regulator.

It presents itself under a brake contact handler for bikes equipped with brake cable and traditional handle. Or a contact on wire for those who want to conserve their original handle or a magnetic relay of hydraulic brakes.

Sensor support : They are not required for all installation, but only on certain type of pedals that allows you to facilitate the installation of the magnetic puck on transmission side.

Torque arm : is a stainless steel shaped with a laser to avoid fixation screw loosening of the drive wheel and to don’t ruin the bicycle frame.

The torque arm is essential for freeride kit.

To choose your model for your bike please read the manual on torque arm’s role.

Freeride motor : is compatible with all Shimano and SRAM cassette in 7,8,9 speeds.

So, you can recover the cassette of your original bicycle or buy once with your kit. We will install it of the wheel.

Please note that if you have 7 or 8 speeds, you’ll have to take cassette spacers to adapt it on the motor.

Carrying bag : Perfect to transport 36V or 48V battery on your bike. You can add in option a neiman supporting 30A current. The neiman is already wired on the Anderson PP30 connector.

ON WHAT BIKE CAN I INSTALL MY SPEED KIT?

The back version of the motor is compatible with all the bikes equipped with a back-wheel axis of 9x135mm.

To be certain of the installation of the speed motor on your bike, please verify that you have a traditional open frame in 135mm.

With a ruler, measure the interior width of the A frame. You must have at least 135mm.

Then measure the frame notches (B value). You must have a value between 9 and 10mm.

The front version of the motor is compatible with all the bikes equipped with a back-wheel axis of 9x100mm.

With a ruler, measure the interior width of the A frame. You must have at least 135mm.

Then measure the frame notches (B value). You must have a value between 9 and 10mm.

BACK CARGO MOTOR 2D DRAWING

BACK FREE WHEEL :

Dimensions Moteur RH205

  •  

DOCUMENTATIONS

Installation notices and use of wheel kit
Display installation notices

Torque arm installation notice

Pedal sensor installation notice

Free wheel and cassettes installation notice
Speed regulator installation notice
Battery installation notice

Torque arm presentation :Choice and installation of pedal sensor for ebikes :
Cycle analyst V3 presentation

Data sheet

puissance nominale et puissance max sous 48V750W / 1000W
Autonomie moyenne en 36V 14,5Ah45 km
Autonomie moyenne en 48V 14,5Ah60 km
Garantie2 ans
puissance nominale et puissance max sous 36V750W
Technologie moteurDirect drive
entraxe cadre Min / Max135mm / 160mm
Compatibilité frein à disqueOui
Technologie du contrôleur22A dual sensored / sensorless sinusoïdal FOC
Diamètre de roue mini20"
Tensions admissibles24V, 36V et 48V
Intensité du contrôleur22A
Coupure freinOui
Vitesse max25Km/h