€20.00
(tax incl.)
Bafang secondary reduction gear cover
replacement part
Filters
Ebikes kits
€25.00
(tax incl.)
This "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built...
€20.00
(tax incl.)
With this magnetic sensor you can cut off your Bafang middle motor and conserve your original hydraulic lever.
Can fit the whole range of Bafang middle drive motor : BBS01, BBS02, BBSHD, Maxdrive...
Can be used on...
€25.00
(tax incl.)
This half handle accelerator is compatible with all our kits.
The two-position switch can be used to turn off the engine if it is wired to the "brake off" input of the controller or to power your lighting.
€20.00
(tax incl.)
This spacer allows you to offset the attachment of the derailleur to allow the use of a double plate on a Bafang BBS01 or BBS02 pedal engine.
€29.00
(tax incl.)
This Wattmeter is the ideal tool for all those who wish to have a reliable autonomy and power gauge.
It will allow you to have an accurate reading of the battery voltage, the power consumed and the energy consumed....
€30.00
(tax incl.)
Universal shunt 1mOhm for V2 and V3 analyst cycles. You can use the analyst cycle on any controller, solar panel, or charger. Supports a direct current of 50A and a max current of 100A
€40.00
(tax incl.)
This potentiometer is perfectly compatible with the V3 analyst cycle. It will allow you to limit the power or speed of your engine while driving without having to enter the setup.
€25.00
(tax incl.)
Large diameter ball bearing with sealed rubber flanges (RS) to effectively protect the mechanism from moisture and impurities. It is designed to withstand the high rotational stresses of the central drives.
€44.90
(tax incl.)
36V charger compatible with 1000W and 2000W electric skateboard kits.
€25.00
(tax incl.)
Primary reduction gear for Bafang central motors BBS01 BBS02 BBS01B BBS02B
€65.00
(tax incl.)
Double rim for fat bike. Very sturdy, it will be perfect for radiating an electric motor for your fat bike.
You can choose 65mm, 80mm or 100mm width.
Color: Black.
€25.00
(tax incl.)
Cable harness to connect your display to your OZO mid motor.
€65.00
(tax incl.)
Double rim for fat bike. Very sturdy, it will be perfect for radiating an electric motor for your fat bike.
You can choose two different widths: 80mm or 100mm
Color: Black.
Other colors: Please contact us.
Width...
€25.00
(tax incl.)
Replacement selector for the OZO vertical color display.
€25.90
(tax incl.)
With this adapter you can install your Bafang central motor BBS01 BBS02 or BBSHD into your BB30 bottom bracket. BB30 is 41,96mm internal diameter as you can find on many Cannondale or specialized bikes.
€33.80
(tax incl.)
Tool pack for installing the Bafang crankset motor on a square axle crankcase.
This pack includes
- 1 torque wrench
- 1 crank extractor
- 1 square axle crankcase remover
€119.00
(tax incl.)
The OZO controller 12V 24V 36V 48V integrates high quality electronic components from the automotive world.
Dual sensored / sensorless adaptive field-oriented sinusoidal mapping (FOC) will allow you to power all...
€35.00
(tax incl.)
2x crank screws, 5x plate screws, nut, lock nut, mounting plate, 5x bash screws.
€39.00
(tax incl.)
Miche Supertype trays with Campagnolo 5x135 road standard, perfectly compatible with the associated 5-hole adapter.
High-quality machined plates made of 7075 aluminum to ensure good longevity against the torque of...
€39.00
(tax incl.)
Derailleur sensor compatible with Bafang BBS01, BBS02, BBSHD and MaxDrive, designed to automatically turn off the engine assistance during a gear change.
This essential accessory protects your drivetrain (chain,...
€39.00
(tax incl.)
Chainring adapter 4x104 BCD for Bafang BBS01 BBS02
With this adapter you can adapt any 4 holes 4x104 chainring and even add double transmission on your ebikes.
CNC machined Aluminium 7075
Made in France
Only for BBS01...
€39.90
(tax incl.)
Miche Supertype chainrings to the 4x104 MTB standard perfectly compatible with the associated 4-hole adapter.
High quality chainrings machined in Aluminum 7075 to ensure good longevity against the torque of Bafang...
€159.00
(tax incl.)
This OZO 35A controller is dual sensored / sensorless field oriented (FOC) sinusoidal mapping, which makes it compatible with all brushless electric motors equipped or not with hall sensors.
Temperature protection to...
€44.00
(tax incl.)
chainring adapter 5 holes for Bafang central motors BBS01 BBS02
Available in 5x130mm / 5x135mm / 5x110mm
With this adapter you can adapt any 5 holes chainring on your Bafang"s motor and even add double transmission....
€45.00
(tax incl.)
The essential tool for torque installation of your Bafang M400 mid-drive motor
This clamp socket is specifically designed for the Bafang M400 mid-drive motor. Strong and precise, it allows you to perform torque...
€211.90
(tax incl.)
250W brushless electric hub motor kit, 125mm in diameter, supplied without battery. Perfect for electrifying a scooter, logistics trolley, picking cart, rolling table, or any other mobile base supporting a 100kg load.
€45.00
(tax incl.)
The essential tool for proper torque installation of your Bafang mid-drive motor
This locking socket is specifically designed for the main nut of Bafang BBS01, BBS02, and BBSHD mid-drive motors.Strong and precise, it...
€45.00
(tax incl.)
With these adapters you will be able to install your Bafang BBS01, BBS02 or BBSHD into PF30 or spécialized bike
€45.00
(tax incl.)
With these adapters you will be able to install your Bafang BBS01, BBS02 or BBSHD into any Shimano pressfit bottom bracket or GXP with internal diameter of 41mm
€49.00
(tax incl.)
KMC e10 reinforced chain for 10-speed transmission specifically developed for electric bicycles with pedal motor.
• 1/2” x 11/128", 122 links, 5.88 mm, silver
• longevity and excellent traction thanks to the...
€49.00
(tax incl.)
Special MTB plate in 32, 34, 36 or 38 teeth NARROW WIDE black anti-derailment.
This plate machined in Aluminum 7075 will be the best choice for mountain biking with your Bafang crankset motor.
Perfectly adaptable on...
Limited special offer
€282.60
(tax incl.)
€284.90
250W brushless electric hub motor kit, 160mm in diameter, supplied without battery. Ideal for electrifying a scooter, logistics trolley, picking cart, rolling table, or any other mobile base supporting a 100kg load,...
€49.00
(tax incl.)
For 9 gears
• 1/2” x 11/128", 136 links, 6.6 mm, silver
• longevity and excellent traction thanks to reinforced bolts
• 9-speed, with MissingLink X-9E quick coupler
• HT-e Hi-Torsion Resistance
Limited special offer
€297.60
(tax incl.)
€299.90
200mm brushless hub motor kit for electric scooters. 250W 8-inch hub motor. Supplied without battery.
€49.00
(tax incl.)
Reinforced KMC chain for use on electric bikes with pedal motor. High resistance chain.
• 1/2” x 11/128", 122 links
• longevity and excellent traction thanks to the reinforced bolts
• 11 speeds with MissingLink X11E...
€299.00
(tax incl.)
This Electric wheel has been specially developed to convert Brompton bike into an electric bike.
Front hub motor with OLD of 75mm and axle diameter of 8mm.
Easy to install, no modification are required on the original...
€55.00
(tax incl.)
Narrow Wide Chainring for Bafang BBS01 / BBS02 Mid-Drive Motor – 36 Teeth
The 36T chainring is compatible with 7, 8, 9, 10, and 11-speed chains.
CNC-machined from 7075 aluminum, it weighs only 100 grams compared to...
€79.00
(tax incl.)
Bafang BBS02 MM G340 500 et 750W replacement rotor.
€79.00
(tax incl.)
Offset Narrow Wide chainring for Bafang BBSHD crankset engine. CNC machined in Alu 7075, which gives them great longevity and a weight gain of 400g compared to the original steel tabletop.
The torque gain is...
€102.00
(tax incl.)
The short transmission pack increases torque, making it easier for steep climbs and rough terrain in mountain biking or hauling heavy loads with a cargo bike. The small chainring allows for a more efficient...
€119.00
(tax incl.)
The secondary steel gear for BBSHD comes as shown on picture with :
- bearings- Freewheel- hood
€146.40
(tax incl.)
A complete kit to allow you to service your Bafang BBS01, BBS02 motor yourself.
€129.00
(tax incl.)
This secondary gears is composed of:
- bottom bracket axle- steel crown- bottom bracket freewheel- bottom bracket sensor for BBS motor
you will receive all above items fully assembled for an easy maintenance of your...
€132.00
(tax incl.)
A complete kit to allow you to service your Bafang BBSHD motor yourself.
€149.00
(tax incl.)
Easily add a motor cut-off to your e-bike equipped with hydraulic brakes!
This high-performance 4-piston hydraulic brake delivers powerful and progressive braking, and features an integrated motor cut-off sensor...
€159.00
(tax incl.)
controller for Bafang BBS01 BBS02 BBS01B BBS02B MM G340 serie 36V 48V 250W 500W 750W. Original spare part.
€169.00
(tax incl.)
Diagnose, Update, and Maintain Your Bafang Motor with Ease
The Bafang BESST Tool (Bafang Electric Smart Service Tool) is an essential accessory for any e-bike owner with a Bafang mid-drive motor. This official tool...
€179.00
(tax incl.)
Spare controller for Bafang BBSHD crankset motors.
€199.00
(tax incl.)
Stator and rotor replacement part for BBSHD motor 68mm length.
€15.00
(tax incl.)
Original Bafang chainring for mid drive motor BBS01 and BBS02 (M215 and M315).
44T is great for city bikes and 46T is good choice for road bicycles.
€19.00
(tax incl.)
Allows the assembly of the Bafang BBS01 or BBS02 crankset motor on an American standard crankset or a BMX box with an internal diameter of 51.4mm.
€17.00
(tax incl.)
For single speed
• 1/2” x 3/32", 112links, 8.0 mm
• longevity and excellent traction thanks to the reinforced bolts
• Mono-vit, with MissingLink Mono quick coupler
• Usable for: BMX / Trial / Gear hub / Single speed
€19.00
(tax incl.)
BBSHD 46T steel chainring.
Can be mounted only on BBSHD motor
€25.00
(tax incl.)
Bafang Eb-bus wiring harness for central motors BBS01 BBS02 BBSHD
€39.00
(tax incl.)
Miche Supertype 5-hole Shimano 130 BCD 5x130mm road standard chainrings perfectly compatible with our 5-hole adapter for Bafang pedal motor.
High quality chainrings, machined in Aluminum 7075 for better resistance to...
€39.00
(tax incl.)
Miche Supertype 5-hole standard road 110 BCD 5x110mm chainrings perfectly compatible with our 5-hole adapter for Bafang pedal motor.
High quality chainrings, machined in Aluminum 7075 for better resistance to the high...
€79.00
(tax incl.)
OZO offers you to choose from three models of displays with Bafang protocol UART 5.2 and 5.8 with cylindric green 5 pins female connector.
Compatible with all bbs series central motor from Bafang and some OZO hub...
Our electric bike conversion kits can be installed on any bike : city bikes, MTB, tricycles, delivery bikes, tandems, folding bikes, cargo bikes…
In order to help you make your decision, you can read our technical information page and answer to the test to define your user profile and find the electric conversion kit that will match perfectly with your needs.
