Control command

Green pushing switch

€10.00 (tax incl.)

This green pushing button switch is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or...

Interrupteur 2 positions rond vert ON-OFF pour vélo

€10.00 (tax incl.)

Multifunction interruptor with 2 positions It can be used as a switch for your lighting or your OZO controller Delivered with 2 JST ways connector

Interrupteur 2 positions rond rouge ON-OFF pour vélo

€10.00 (tax incl.)

Multifunction interruptor with 2 positions It can be used as a switch for your lighting or your OZO controller Delivered with 2 JST ways connector

2-position toggle switch

€10.00 (tax incl.)

Multifunction switch with two positions. It can be used as an ON/OFF switch for your lighting or for your OZO controller. Supplied with 2-pin JST connector.

Boitier de contrôle

€10.00 (tax incl.)

Empty Control box with 1 to 5 spacers Boitier de commande vide de 1 à 5 emplacements Color: grey ou yellow/orange Hole diameter : 22mm

Black brake push button for bike.

€12.00 (tax incl.)

This push button is designed for installation on a 22mm handlebar or tube. On a bicycle or motorcycle, it can be used to ground the engine, deactivate the cruise control, or activate the horn. On a cart, it can be...

Interrupteur 2 positions rond vert ON-OFF pour vélo

€12.00 (tax incl.)

Multifunction two-position switch. It can be used as a forward/reverse switch, ON/OFF for your lighting, or for your OZO controller. Supplied with a 2-way JST connector.

Interrupteur double pour vélo électrique (1 interrupteur 2 positions + 1 bouton poussoir)

€14.00 (tax incl.)

Double combined for handlebar installation or 22mm tube. Equipped with two pushing buttons,one green and one red. This product is perfect for activating the forward or backward motion by pressure on an industrial...

Double positions siwtches handset

€14.00 (tax incl.)

Double positions siwtches handset for handlebar installation or 22mm tube. Delivered with a 2 ways JST connector and a 1100mm cable length

handset with one pushing button and one ON/OFF switch

€14.00 (tax incl.)

handset with one pushing button and one ON/OFF switch for handlebar installation or 22mm tube. Delivered with a 2 ways JST connector and a 1100mm cable length

3 position switch for OZO controller

€15.00 (tax incl.)

Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...

Push button momentary

€15.90 (tax incl.)

Push button momentary Color : green or red Diameter : 22mm

Position selector: 2 positions

€15.90 (tax incl.)

Position selector: 2 positions Diameter : 22mm

Connecteur étanche 12 voies mâle + femelle 4 vis

12 pin waterproof plug connector

€15.00 (tax incl.)

12 pin waterproof plug connector

Position selector: 3 positions

€15.90 (tax incl.)

Position selector: 3 positions Diameter : 22mm

Waterproof 3 pin kayak motor connector

€19.90 (tax incl.)

Waterproof 3 pin kayak motor connector

Emergency stop button

€15.90 (tax incl.)

Emergency stop button - red mushroom Diameter : 22mm Available with or without housing.

Selecteur de mode (2 boutons poussoir)

€19.00 (tax incl.)

Double combined for handlebar installation or 22mm tube. Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any...

Interrupteur pour vélo (bouton poussoir rond rouge + selecteur)

€19.00 (tax incl.)

The 2 positions selector coudl be used to start the system or switch on the lighting or in order to select between the forward/backward motion. The red pushing bouton could be used to activate the brake...