Industry
Our range of electric wheel motors also covers areas other than cycling, such as industry, medical or agriculture.
Fuse holder MIDIVAL for 50A, 60A, 100A and 200A fuses
7,90 € In StockFuse holder MIDIVAL for 50A, 60A, 100A and 200A fuses
Interrupteur 2 positions rond rouge ON-OFF pour vélo
10,00 € IN STOCKMultifunction interruptor with 2 positions It can be used as a switch for your lighting or your OZO controllerDelivered with 2 JST ways connectorInterrupteur 2 positions rond vert ON-OFF pour vélo
10,00 € In StockMultifunction interruptor with 2 positions It can be used as a switch for your lighting or your OZO controllerDelivered with 2 JST ways connector
Boitier de contrôle
10,00 € IN STOCKEmpty Control box with 1 to 5 spacers Boitier de commande vide de 1 à 5 emplacements Color: grey ou yellow/orange Hole diameter : 22mmBouton poussoir rond vert
10,00 € In StockThis red pushing button is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the speed regulatior or moreover activate the horn On a cart, it can be used to drive the motor by pressureDelivered with 2 JST ways connectorBouton poussoir rond rouge
10,00 € In StockThis red pushing button is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the speed regulatior or moreover activate the horn On a cart, it can be used to drive the motor by pressureInterrupteur double pour vélo électrique (1 interrupteur 2 positions + 1 bouton poussoir)
14,00 € In StockDouble combined for handlebar installation or 22mm tube. Equipped with two pushing buttons,one green and one red. This product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any other rolling base. Delivered with a 2 ways JST connector and a 1100mm cable length3 position switch for OZO controller
15,00 € In StockThree-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are programmed on 30%, 60% and 100% as standard. Note that we can program the three power levels differently by custom programming the controller.
Interrupteur pour vélo (bouton poussoir rond rouge + selecteur)
19,00 € In StockThe 2 positions selector coudl be used to start the system or switch on the lighting or in order to select between the forward/backward motion. The red pushing bouton could be used to activate the brake regeneration or the horn. Suitable with every 22mm diameter handlebar Delivered with a 2 ways JST connector and a 1100mm cable lengthSelecteur de mode (2 boutons poussoir)
19,00 € In StockDouble combined for handlebar installation or 22mm tube. Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any other rolling base. Delivered with a 2 ways JST connector and a 1100mm cable lengthFuse holder ANL CNL for 100A 300A 400A and 500A fuse
19,90 € In StockFuse holder for 100A 300A 400A and 500A fuse
Motor industrial extension
29,00 € In stockIndustrial motor extension made up of :3 phase pins 5 pins Hall sensors 1 temperature pi
