Catalog
Loading...
We offer you a wide range of throttle and pas sensors for electric bikes and all the corresponding accessories.
Half handle lock on type with battery gauge 36V or 48V. The LEDs give you an idea of the remaining energy in the battery: 20%, 50%, 100%. It incorporates a two-position switch
Accelerator handle complete motorcycle type. Compatible with all electric motorcycles with a handlebar diameter of 22mm. Connector : JST 3 way Sold by the pair.
Thumb throttle with Battery indicator and ON/OOF switch for Ebikes. You can install it on the right or Left side of your handlebar. Available in two Voltage: 36V gauge or 48V.
This new throttle is smaller than the old one so it doeasn't bother the cassette speed shifting. Julet 3 pins waterproof connector
The new half handle has a much smaller outside diameter than the old one, which allows a perfect integration on the handlebar without generating gear shifting. The diameter is identical to that of the lock-on handles.
For informed customers only. Half handle type accelerator delivering a 0-5V linear signal. Integrated three-position switch. Warning: this switch is not compatible with our kits and is not compatible with the Cycle analyst. It is only compatible with our generic electric bicycle controller.
This "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built into the LED headlight.
This half handle accelerator is compatible with all our kits. The two-position switch can be used to turn off the engine if it is wired to the "brake off" input of the controller or to power your lighting.
This ebike accelerator is thumb operated. This model is mixed, that is to say that you can install it on the right of your handlebar as on the left. Ideal for off-road because you will have a better grip of your handlebar in the technical passages. Supplied with 3-way JST connector.
This ebike accelerator is thumb operated. An exact copy of the accelerators found on quads or water scooters. Note that you can only install this accelerator if you have previously removed a derailleur lever. Supplied with 3-way JST connector.
This ebike accelerator is thumb operated. This model is mixed, that is to say that you can install it on the right of your handlebar as on the left. Ideal for off-road because you will have a better grip of your handlebar in the technical passages. Supplied with 3-way JST connector.
Half handle type accelerator. Ideal for long rides and people used to motorcycle. Compatible with all our kits.
This ebike accelerator is thumb operated. Designed for right-hand mounting, you can also install it on the left side of your handlebar. Ideal for off-road because you will have a better grip of your handlebar in the technical passages.
This extension cable has a 3-way JST connector for pedal sensor or accelerator. With switch 3-Position. Available in 3 lengths :30 cm 50 cm 100 cm
©2018 OZO électric