Switch

Switch There are 12 products.

per page
Showing 1 - 12 of 12 items
  • 23,00 €
  • 20,00 €
  • 19,00 €

    The 2 positions selector coudl be used to start the system or switch on the lighting or in order to select between the forward/backward motion. The red pushing bouton could be used to activate the brake regeneration or the horn. Suitable with every 22mm diameter handlebar Delivered with a 2 ways JST connector and a 1100mm cable length

    19,00 €
    In Stock
    • 19,00 €

      Double combined for handlebar installation or 22mm tube. Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any other rolling base. Delivered with a 2 ways JST connector and a 1100mm cable length

      19,00 €
      In Stock
      • 15,00 €

        Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are programmed on 30%, 60% and 100% as standard. Note that we can program the three power levels differently by custom programming the controller.

        15,00 €
        In Stock
        • 14,00 €

          Double combined for handlebar installation or 22mm tube. Equipped with two pushing buttons,one green and one red. This product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any other rolling base. Delivered with a 2 ways JST connector and a 1100mm cable length

          14,00 €
          In Stock
          • 10,00 €

            Multifunction interruptor with 2 positions It can be used as a switch for your lighting or your OZO controllerDelivered with 2 JST ways connector

            10,00 €
            In Stock
            • 10,00 €

              Multifunction interruptor with 2 positions It can be used as a switch for your lighting or your OZO controllerDelivered with 2 JST ways connector

              10,00 €
              In Stock
              • 10,00 €

                This red pushing button is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the speed regulatior or moreover activate the horn On a cart, it can be used to drive the motor by pressure

                10,00 €
                In Stock
                • 10,00 €

                  This red pushing button is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the speed regulatior or moreover activate the horn On a cart, it can be used to drive the motor by pressureDelivered with 2 JST ways connector

                  10,00 €
                  In Stock
                  Showing 1 - 12 of 12 items