0

3-position switch for cycle analyst V3

Specific three-position switch for the V3 analyst cycle.

This switch integrates resistors on each mode and will allow you to define three different assistance algorithms by activating the "auxiliary" setup of your V3 analyst cycle.

This function is interesting when you use a pedal board sensor on your bike.

Read moreShow less
€18.00 (tax incl.)
Reference:
000093
You may also like
Interrupteur ON-OFF Interrupteur ON-OFF Interrupteur ON-OFF

€14.00 (tax incl.)
Double positions siwtches handset for handlebar installation or 22mm tube. Delivered with a 2 ways JST connector and a 1100mm cable length
Interrupteur ON-OFF Interrupteur ON-OFF Interrupteur ON-OFF

€19.00 (tax incl.)
This handset including two switches (2x positions switches) can be used to start the system or switch on the lighting or in order to select between the forward/backward motion. Suitable with every 22mm diameter...
Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo

€12.00 (tax incl.)
This push button is designed for installation on a 22mm handlebar or tube. On a bicycle or motorcycle, it can be used to ground the engine, deactivate the cruise control, or activate the horn. On a cart, it can be...
Interrupteur ON-OFF Interrupteur ON-OFF Interrupteur ON-OFF

€19.00 (tax incl.)
Double combined for handlebar installation or 22mm tube. Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any...
Description

This switch is to be connected directly to the back of your analyst V3 cycle on the white JST connector.

It will allow you to set three different assistance modes for use with a pedal sensor.

Read moreShow less
Product Details
000093
Reviews
No comments

Leave a review

  • Quality:
Describe this product using simple and short words.
Upload images:
Drop images here or click to upload.
Frequently questions
Send us your question

Be the first to ask a question about this product!

Consult, revoke or modify data

Question about the product

* Required fields
(read)
Customers who bought this product also bought:
Bouton poussoir rond vert Bouton poussoir rond vert

€10.00 (tax incl.)
This red pushing button is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the...
Régulateur de vitesse

€25.00 (tax incl.)
speed control device for electric bicycle. On the same principle as your car’s cruise control: you select a cruising speed, you release the accelerator and the electronics regulate the engine power to maintain a...
3-Way JST extension cable 3-Way JST extension cable

€8.00 (tax incl.)
This extension cable has a 3-way JST connector for pedal sensor or accelerator. With switch 3-Position. Available in 3 lengths : 30 cm 50 cm 100 cm
Boitier JST femelle Boitier JST femelle

€1.20 (tax incl.)
The connectors are black or white depending on the arrivals.
TORQUE ARM VISSER 2 en INOX

€7.00 (tax incl.)
To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame. 2D plan of the M5 leg 2D plan of the M6 leg
collier de serrage collier de serrage

€9.00 (tax incl.)
This M5 pipe adapter allows you to install any battery or accessories on your frame pipe without threaded eyelets eyelets. Ideal for MTB using.
Close
Click for more products.
No products were found.

Settings

Click for more products.
No products were found.

Menu

Please sign in first.

Sign in