€50.00
(tax incl.)
Gift voucher worth 50 € to 200 €
Valid for 1 year on all products on the site
Chargement des images...
adapter pedal board sensor under frame
This bracket allows the installation of the bottom bracket sensor on the frame under the crankset, when it is not possible to install the bottom bracket sensor on the vertical frame tube.
The pedal sensor’s probe is sold separately.
€10.00
(tax incl.)
Reference:
002219
You may also like
€20.00
(tax incl.)
Kingmeter pas sensor 12 magnets with waterproof connector Julet Z309AG yellow.
Matching with all 15A and 22A OZO controllers.
câble length : 150 mm.
€20.00
(tax incl.)
Built-in integrated pedal sensor for square axle bottom brackets that have a minimum clearance of 4mm between crank and frame.
Compatible with OZO Touring and Enduro kits.
Very simple installation.
Julet three-way...
€9.90
(tax incl.)
12x magnets ring for pedelec sensor.
Brand : Kingmeter
Drive side and opposite side available.
For easier installation you can use our support available here
€10.00
(tax incl.)
These adapters allow to install the pagnet ring of your pedelec sensor on any bottom bracket standard.
€20.00
(tax incl.)
Pedal sensor for 15A and 22A OZO controllers to be installed on the vertical frame tube
Supplied with the 12-magnet half discs and the probe.
3-way Julet waterproof connector.
Cable length: 120 mm.
End to end...
If you have a bottom bracket sensor on the frame, that is to say a bottom bracket sensor designed to be installed on the vertical frame tube but the position of the derailleur or the format of the bottom bracket box does not allow its installation on the vertical frame tube, This bracket will allow you to install this sensor under the crankset.
Customers who bought this product also bought:
€115.00
(tax incl.)
The OZO 15A Controller, equipped with Field-Oriented Control (FOC) technology, ensures optimal performance for OZO Brushless motors. Its IP6-rated tropicalization and waterproof connectors provide exceptional...
€5.00
(tax incl.)
The Stretch Neoprene Base Protector for bicycles provides protection against scratches, impacts, and outdoor elements.
Made of neoprene, it fits snugly around the bike base, and its velcro system ensures a secure,...
€20.00
(tax incl.)
Pedal sensor for 15A and 22A OZO controllers to be installed on the vertical frame tube
Supplied with the 12-magnet half discs and the probe.
3-way Julet waterproof connector.
Cable length: 120 mm.
End to end...
€20.00
(tax incl.)
This universal adapter allows to create new fixing points on the frame of the bike by picking up the fixings of the original bottle holder, in order to facilitate the installation of batteries frames 500Wh, 700Wh,...
Leave a review