Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are programmed on 30%, 60% and 100% as standard. Note that we can program the three power levels differently by custom programming the controller.
This green pushing button switch is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the speed regulatior or moreover activate the horn On a cart, it can be used to drive the motor by pressureDelivered with 2 JST ways...
This red pushing button is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the speed regulatior or moreover activate the horn On a cart, it can be used to drive the motor by pressure
Double combined for handlebar installation or 22mm tube. Equipped with two pushing buttons,one green and one red. This product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any other rolling base. Delivered with a 2 ways JST connector and a 1100mm cable length
The 2 positions selector coudl be used to start the system or switch on the lighting or in order to select between the forward/backward motion. The red pushing bouton could be used to activate the brake regeneration or the horn. Suitable with every 22mm diameter handlebar Delivered with a 2 ways JST connector and a 1100mm cable length
Double combined for handlebar installation or 22mm tube. Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any other rolling base. Delivered with a 2 ways JST connector and a 1100mm cable length
Multifunction two-position switch. It can be used as a forward/reverse switch, ON/OFF for your lighting, or for your OZO controller. Supplied with a 2-way JST connector.
This push button is designed for installation on a 22mm handlebar or tube.On a bicycle or motorcycle, it can be used to ground the engine, deactivate the cruise control, or activate the horn. On a cart, it can be used to engage forward motion through pressure.Supplied with a 2-way JST connector.
This handset including two switches (2x positions switches) can be used to start the system or switch on the lighting or in order to select between the forward/backward motion. Suitable with every 22mm diameter handlebar Delivered with a 2 ways JST connector and a 1100mm cable length
handset with one pushing button and one ON/OFF switch for handlebar installation or 22mm tube. Delivered with a 2 ways JST connector and a 1100mm cable length