Round red push button for 22mm tube

This red pushing button is expected to be installed on a handlebar or a 22mm tube.

On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the speed regulatior or moreover activate the horn

On a cart, it can be used to drive the motor by pressure

Read moreShow less
€10.00 (tax incl.)
BACKORDER
Reference:
000544
You may also like
€14.00 (tax incl.)
Double positions siwtches handset for handlebar installation or 22mm tube. Delivered with a 2 ways JST connector and a 1100mm cable length
€19.00 (tax incl.)
This handset including two switches (2x positions switches) can be used to start the system or switch on the lighting or in order to select between the forward/backward motion. Suitable with every 22mm diameter...
€12.00 (tax incl.)
This push button is designed for installation on a 22mm handlebar or tube. On a bicycle or motorcycle, it can be used to ground the engine, deactivate the cruise control, or activate the horn. On a cart, it can be...
€12.00 (tax incl.)
Multifunction two-position switch. It can be used as a forward/reverse switch, ON/OFF for your lighting, or for your OZO controller. Supplied with a 2-way JST connector.
€19.00 (tax incl.)
Double combined for handlebar installation or 22mm tube. Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any...
€10.00 (tax incl.)
Multifunction interruptor with 2 positions It can be used as a switch for your lighting or your OZO controller Delivered with 2 JST ways connector
Product Details
000544
Reviews
No comments

Leave a review

  • Quality:
Describe this product using simple and short words.
Upload images:
Drop images here or click to upload.
Frequently questions

Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Customers who bought this product also bought:
€18.00 (tax incl.)
Specific three-position switch for the V3 analyst cycle. This switch integrates resistors on each mode and will allow you to define three different assistance algorithms by activating the "auxiliary" setup of your V3...
€39.00 (tax incl.)
Chainring adapter 4x104 BCD for Bafang BBS01 BBS02 With this adapter you can adapt any 4 holes 4x104 chainring and even add double transmission on your ebikes. CNC machined Aluminium 7075 Made in France Only for BBS01...
€29.00 (tax incl.)
Industrial motor extension made up of : 3 phase pins 5 pins Hall sensors 1 temperature pi
€20.00 (tax incl.)
Motor cable extender 45cm and 1m Extension for motor cable with 3x 2.00mm2 cables for the phases and 5x 0.22mm2 cables for the HALL sensors. The extensions are supplied with Anderson PP30 connectors for the phases...
Close
Click for more products.
No products were found.

Settings

Click for more products.
No products were found.

Menu