€15.00
(tax incl.)
Screw set for mounting the motor and controller to the universal stainless steel mount for OZO mid-drive motors
Chargement des images...
Primary transmission pulley for 1008 removable hub
Primary transmission pulley for 1008 removable hub. Designed to provide the connection between the motor shaft and the transmission belt. It is available in two versions: with an SPA V-groove or with HTD 8M30 teeth for synchronous, slip-free transmission. Its mounting on a 1008 removable hub makes installation, adjustment and pulley removal easier.
€54.00
(tax incl.)
Reference:
009633
You may also like
€15.00
(tax incl.)
Complete wiring set for hybridization kit including:The switched positive cable used to connect the positive terminal of your battery to the dedicated connector on your controller.A set of ring terminals sized for...
€180.00
(tax incl.)
Universal secondary pulley for standard couplings
4 versions available depending on your coupling and the desired belt (SPA V-belt or HTD 8M30 timing belt):SPA 125mm: inner diameter 50mm, outer diameter 125mmHTD 8M30...
€70.00
(tax incl.)
HTD8M30 toothed belt, 8mm pitch, 20mm width, 760 or 1200 mm length choice.
€32.90
(tax incl.)
This transmission belt SPA V-belt offers a slipping effect that can act as a safety feature in the event of propeller blockage.
Length = 730mm
Primary transmission pulley for 1008 removable hub
SPA V-groove version
A key component of your primary transmission, this robust pulley is designed to connect the shaft of your electric motor to the belt. It is intended for mounting with a 1008 removable hub, which greatly facilitates adjustment, installation and removal of the pulley on the motor shaft.
Warning: The removable hub is not supplied with the pulley (sold separately).
Technical specifications:
-
Material: GG 20 cast iron (DIN 1691 standard), providing high mechanical strength.
-
Belt compatibility: Designed for SPA profile V-belts.
-
Groove profile: Machined in accordance with DIN 2211, ensuring optimal belt seating and efficient torque transmission.
HTD 8M30 toothed version
A key component of your primary transmission, this robust pulley is designed to connect the shaft of your electric motor to the belt. It is intended for mounting with a 1008 removable hub, which greatly facilitates adjustment, installation and removal of the pulley on the motor shaft.
Warning: The taper-lock bush is not supplied with the pulley (sold separately).
Technical specifications:
-
Material: Cast iron, providing high mechanical strength and suitable for high-torque transmission.
-
Belt compatibility: Designed for HTD 8M30 timing belts, with an 8 mm pitch and a width of 30 mm.
-
Tooth profile: HTD 8M synchronous profile ensuring precise engagement with the belt and slip-free torque transmission.
-
Number of teeth: Several tooth counts can be offered to adapt the transmission ratio to your motor system. Contact us to determine the number of teeth best suited to your application.
Leave a review