ACCESSORIES FOR YOUR MID-DRIVE MOTOR KIT
OZO has developed a whole range of accessories to add to your electric kit to make its use even more enjoyable.
THE THROTTLE
The throttle allows you to manually adjust the motor power from 0 to 100%, like on a moped. However, please note that using the throttle is not allowed on public roads beyond 6km/h.
BRAKE LEVER CUT-OFF
The brake lever cut-off allows you to cut off the motor power when braking. Although the motor cuts off as soon as you stop pedaling, brake levers cut-offs are more secure in urban areas and for people with balance problems. You can choose to install a brake lever cut-off on the rear brake only or on both brakes. The choice of brake lever cut-off will depend on the original brakes of your bike.
HYDRAULIC BRAKING SYSTEM
The MAGURA MT5E hydraulic braking system has been specially developed for E-MTBs. The 4-piston caliper allows for efficient braking even on the most powerful electric bikes. Waterproof 2-pin connector - Normally Open Contact.
BUY THE HYDRAULIC BRAKING SYSTEM
HYDRAULIC BRAKE LEVER CUT-OFF
Magnetic contact allowing you to activate the brake cut-off on your system while retaining your original hydraulic brakes. Also compatible with all bikes equipped with a red 2-way Julet connector or Higo.
BUY THE HYDRAULIC BRAKE CUT-OFF
CABLE BRAKE CUT-OFF
Brake lever with contact compatible with OZO controllers. Supplied with waterproof red Julet 2-way connector Z209 and compatible with equivalent Higo connector.
DERAILLEUR SENSOR
The derailleur sensor allows you to cut the motor when changing gears. Very useful in mountain biking, where you often change several gears at once on the fly, the derailleur sensor prevents premature wear of the chain, sprockets, and derailleur. Indeed, when the motor is engaged and you change gear, it's like pedaling on your bike, the gears shift difficultly, and the transmission will wear out quickly. The derailleur sensor avoids this wear. Note that this accessory is compatible only with mid-drive motors.
5-HOLE CHAINRING ADAPTER
Allows mounting 5-hole chainrings to the Campagnolo 5x135 or Shimano 5x130 or 5x110 standard on Bafang BBS01 and BBS02 mid-drive motors. Allows the installation of two chainrings on the Bafang mid-drive motor.
CNC machined part in FRANCE and designed by OZO
4-HOLE CHAINRING ADAPTER
Allows mounting conventional transmission chainrings to the 4-hole mountain bike standard (4x104 BCD).
Also offers the possibility of a double chainring setup.
REINFORCED CRANK ARMS
Pair of reinforced crank arms 175 mm in length for Bafang BBS01, BBS02, and BBSHD mid-drive motors. Ideal for mountain biking or for those accustomed to riding with 175mm crank arms.
The 13mm offset compared to the original Bafang crank arms prevents the crank arm from contacting the rear frame on some bikes, as is often the case with fat bikes or Fatty.
EXTENSIONS
ACCELERATOR/PEDAL SENSOR 30cm/1m
BRAKE CUT-OFF/LIGHT 30cm/80cm
DISPLAY 30cm/1m
THE SIMPLIFIED MAIN HARNESS 60 CM
A simplified main harness, allowing you to lighten your electrical setup on your bike.
Y-CABLES
ACCELERATOR/BRAKE CUT-OFF
Explanatory paragraph
DISPLAY
Explanatory paragraph
JULET LIGHTING
Explanatory paragraph
BRAKE CUT-OFF
Explanatory paragraph
BIKE LIGHTS
We offer a range of bike lights. These high-power lamps, 1000 and 2000 Lumens, will provide you with great riding comfort during your nocturnal outings. Bike lights come with their own lithium battery, while bike lamps are powered directly from your electric bike's battery.
TIRES
All the tires we offer on our website have been selected to perfectly meet the needs of powerful electric bikes. These are the best tires classified by type of practice, whether for MTB, urban electric bike, touring bike, gravel, bike commuting... They are all perfectly compatible with our electric bike conversion kits.
TOOL KIT
Toolkit for installing the Bafang mid-drive motor on a square taper bottom bracket. This kit includes: 1 tightening key, 1 crank extractor, 1 bottom bracket remover for square axle.
REINFORCED CHAINS
The bike chains offered by OZO ensure longevity and excellent traction thanks to their reinforced bolts. They are essential for the use of your e-bike and the proper functioning of your electric kit.
CHARGERS
Fast chargers, USB, solar... OZO offers you a complete range of chargers for your lithium batteries!
FAST CHARGER 10A
The 10A Fast Charger is only compatible with PVC batteries over 700Wh. It is not compatible with the bottle battery or frame batteries.
TRAVEL CHARGER
The travel charger for lithium battery is an essential accessory for electric bike (e-bike) users on the go. It offers a convenient and efficient charging solution, allowing you to recharge your battery wherever you are, using the cigarette lighter socket in your car, your camper van.
SOLAR CHARGER
Solar charger 300W with BOOST controller MPPT technology.
You can recharge any Lithium, Lead, Nimh Nicd battery with sunlight, regardless of its voltage from 24V to 72V.
Anderson charging connector. Anderson to RCA male, Anderson to XLR male, and Anderson to Jack male charging adapters are available at the bottom of the product sheet in the Accessories section.
