€9.90
(tax incl.)
This tool will allow you to unscrew the cups of your square-axis bottom bracket.
Filters
Ebikes kits
€11.90
(tax incl.)
Fiber replacement gasket steel gear side at the right side of mid drive motor Bafang BBSHD M615 G320.
€10.00
(tax incl.)
Multifunction switch with two positions.
It can be used as an ON/OFF switch for your lighting or for your OZO controller.
Supplied with 2-pin JST connector.
€12.00
(tax incl.)
Extension cable Julet for bafang display 5 pins or OZO display
30cm length
€49.00
(tax incl.)
gear clutch and freewheel Fatty Bafang RMG06
€12.00
(tax incl.)
Controller gasket for Bafang BBS01 BBS02 BBSHD M215 M315 M615 G320 G340.
€49.00
(tax incl.)
Gear cluster and freewheel clutch for MAC motors and EZEE and PUMA motors
Available in 17mm or 21mm
€10.00
(tax incl.)
This green pushing button switch is expected to be installed on a handlebar or a 22mm tube.
On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or...
€12.00
(tax incl.)
Crank arm 170mm for Bafang central motors BBS01 BBS02 BBS01B BBS02B BBSHD or all others central motors woth square bottom bracket axle. M215, M315, M615, G340
€12.00
(tax incl.)
In 6.20 mm thick stainless steel
To check the installation of the torque arm on your bike, you can print the plan below, cut out the part and position it on the frame.
Plan "Base 3 M12"
€12.90
(tax incl.)
Grease kit for Bafang central motors overhaul
We advise to change grease inside your central motor every 3000 kilometers
€12.00
(tax incl.)
In 6.20 mm thick stainless steel
To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame.
Plan "Base 4 M12"
Plan "Base 4 M14"
€2.00
(tax incl.)
Cassette spacer is needed if you want to install 7 or 8 speeds cassette on our Motor hub originally designed for 9 and 10 speeds.
To install 7 speed cassette you can choose 3mm spacer.
1mm spacer for 8 speed cassette
€12.90
(tax incl.)
Y cable wire to plug 2 sensors on one entry of your Bafang motor BBS01 BBS02 BBSHD maxdrive or any system using Julet connector 3 pins.
With this cable you can plug one or two gear sensors, and plug two brake...
€14.00
(tax incl.)
The Loctite 243 is the essential medium-strength netting brake to secure all the hardware of your electric bike against road and engine vibrations. Ideal for mounting brake discs, crankset motor mounts or torque arms,...
€14.90
(tax incl.)
Speed sensor for Bafang central motor BBS01 BBS02 BBSHD
Speedo replacement part
€65.00
(tax incl.)
This epicyloidal gears can let you fix your OZO motors Freerider and Donkey but also some others brands as XOFO, XFV, XFVK, XFVF, Trotrx, Globe3T, Gravity, Cyclotec...
Dimensions:
External gear diameter : 54mm...
€15.00
(tax incl.)
Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...
€15.00
(tax incl.)
Original handlebar support for Bafang displays:
- DIsplay LCD C800
- DISPLAY LCD 965
- DISPLAY TFT 850
Used to replace the original support if it is broken.
€15.00
(tax incl.)
Support for potentiometer to screw on the back of the V2 or V3 analyst cycle
€15.00
(tax incl.)
This tool is necessary to screw both nuts of Bafang central motor BBS01 BBS02 and BBSHD
€16.00
(tax incl.)
The speed sensor for Cycle Analyst is the ideal accessory to accurately measure your actual speed and distance traveled on your electric bike. Connected directly to your on-board computer, this sensor works with a...
€15.00
(tax incl.)
Electronic card on which the magnet of the pedal sensor passes.
€16.00
(tax incl.)
The CA (Cycle Analyst) bracket is the ideal accessory to install your on-board computer directly in the center of your cockpit. By attaching the Cycle Analyst to the stem, you free up space on your handlebars while...
€17.00
(tax incl.)
For 7/8 speed
• 1/2” x 3/32", 114 links, 7.3 mm
• longevity and excellent traction thanks to reinforced bolts
• 8-speed, with MissingLink X-8 quick coupler
• Usable for: 18-21-24 speed HG
€19.00
(tax incl.)
Primary reduction nylon gear for Bafang central mid motors BBS01 BBS02 M215 M315
Original spare part from BAFANG
€19.90
(tax incl.)
Bottom bracket freewheel for Bafang central motor BBS01B /BBS02B
€19.00
(tax incl.)
Double combined for handlebar installation or 22mm tube.
Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any...
€20.00
(tax incl.)
brake sensor for road bikes.
Can fit on all Bafang middle motor BBS01 BBS02 BBSHD or Maxdrive or any system using Julet waterproof connector 3 pins
Limited special offer
€536.10
(tax incl.)
€546.10
The solex 250W front wheel kit is the best choice for the Solex nostalgic. This very quiet electric kit will allow you to transform your Solex bike into a hybrid vehicle. This solution allows you to keep the iconic...
€19.00
(tax incl.)
Pedal sensor compatible with the generic 250W controller for the repair of electric bikes.
2 models available: Integrated 12 magnets or V7 6 magnets
The V7 comes with a 6-magnet magnetic washer.
Cable length of 60...
€20.00
(tax incl.)
Bottom bracket freewheel for Bafang central motor BBS01B /BBS02B
€19.00
(tax incl.)
The pedal sensor is a rotation sensor. You are required to pedal for assistance and you cannot precisely dose the desired level of assistance since this level is determined by a law of assistance specific to the...
€20.00
(tax incl.)
Bafang ebrake for BBS01 BBS02 BBSHD Maxdrive
Can also be plugged on any ebikes with Julet waterproof connector 3 pins.
€20.00
(tax incl.)
This ebike accelerator is thumb operated.
An exact copy of the accelerators found on quads or water scooters.
Note that you can only install this accelerator if you have previously removed a derailleur lever....
€20.00
(tax incl.)
This cable allows to update your cycle analyst with the last software version and also to read and set all datas on your computer.
Our electric bike conversion kits can be installed on any bike : city bikes, MTB, tricycles, delivery bikes, tandems, folding bikes, cargo bikes…
In order to help you make your decision, you can read our technical information page and answer to the test to define your user profile and find the electric conversion kit that will match perfectly with your needs.
