Chargement des images...
20 to 29" x 1.95 to 2.50" linear air chamber
The linear air chamber is very useful for quickly repairing a puncture on a bike where removing the wheel is "complicated". This is the case for electric bicycles equipped with an in-wheel motor or bikes with rollerbrake or gear hub brakes.
Linear or straight design of the air chamber, as opposed to the conventional closed air chamber, facilitates quick replacement without requiring removal of the wheel from the bicycle.
A single linear tube can accommodate different tyre sizes from 20'' to 29'''.
The ends of the air chamber overlap to create a circular air chamber that fills the tire, eliminating the need to completely remove the wheel; simply unclip one side of the tire and insert the linear air chamber into it.
€12.00
(tax incl.)
Reference:
009173
You may also like
€24.00
(tax incl.)
19" 80/100 mixte 2.75-R19 Motorcycle tire
Outside diameter 627mm
Width 80mm
€25.00
(tax incl.)
12" air chamber - 1/2 x1.75 x 2 1/4 elbow valve
THE LINEAR AIR CHAMBER
Junction point of the chamber in the tire.
 |
 |
Example of the inflated inner tube:
the overlap of the linear air chamber will be greater in a small tire
 |
 |
Customers who bought this product also bought:
€10.00
(tax incl.)
These adapters allow to install the pagnet ring of your pedelec sensor on any bottom bracket standard.
€17.00
(tax incl.)
For 7/8 speed
• 1/2” x 3/32", 114 links, 7.3 mm
• longevity and excellent traction thanks to reinforced bolts
• 8-speed, with MissingLink X-8 quick coupler
• Usable for: 18-21-24 speed HG
€20.00
(tax incl.)
This electric bike thumb throttle is compatible with all Bafang mid-drive motor kits and OZO electric wheel kits in 250W, 500W, and 750W configurations.
It can be installed on either the right or left side of your...
€1.50
(tax incl.)
The Anderson box holding clip is the essential accessory to secure your electrical connections against road bumps and vibrations. It firmly locks two Powerpole connectors together, preventing any accidental...
€1.50
(tax incl.)
The Anderson Powerpole PP30 is the essential reference to secure the electrical connections of your kit, especially between the battery and the controller. Thanks to its modular system, it prevents any reversal of...
€8.90
(tax incl.)
The crank lever is the essential tool for properly removing the cranks from your bike during the installation of your electrical kit. Whether you need to mount a crankset motor or position a pedaling sensor (PAS),...
€12.00
(tax incl.)
Extension cable Julet for bafang display 5 pins or OZO display
30cm length
Leave a review