€1.60
(tax incl.)
Screws for Bafang crankset motor plate.
Sold by 5.
Filters
Accessories for mid drive motors Bafang
€2.00
(tax incl.)
Bottom bracket for offsetting the Bafang pedal motor if it touches the frame bases, which can be the case on fat bikes or fat bikes.
These spacers can also be used to offset the freewheel body on an in-wheel motor....
€3.90
(tax incl.)
Grease kit for Bafang central motors overhaul
We advise to change grease inside your central motor every 3000 kilometers
€4.50
(tax incl.)
High performance ball bearing with sealed rubber flanges (RS) to effectively protect the internal mechanism from water, dust and impurities. It is specially designed to withstand the rotational constraints of the...
€4.50
(tax incl.)
High performance ball bearing with sealed rubber flanges (RS) to effectively protect the internal mechanism from water, dust and impurities. It is specifically designed to meet the rotational constraints of the...
€4.50
(tax incl.)
gasket for Bafang bottom bracket axle on central motors BBSHD.
€4.50
(tax incl.)
gasket for Bafang bottom bracket shaft on central Bafang motors BBS01 BBS02. M215 , M315 G340 250W 500W et 750W
€4.50
(tax incl.)
Grease kit for Bafang central motors overhaul
We advise to change grease inside your central motor every 3000 kilometers
€4.90
(tax incl.)
12 x 28 x 7 mm precision ball bearing with rubber sealing (RS) against dust and moisture. Ideal to restore a smooth and backless rotation on your bike components or small engines.
€5.00
(tax incl.)
Original protective cover for Bafang pedal motor.
Only compatible with Bafang BBS01/BBS02 pedals.
Available in 44 teeth or 46/48 teeth
Not compatible with BBSHD.
€5.90
(tax incl.)
Grease kit for Bafang central motors overhaul
We advise to change grease inside your central motor every 3000 kilometers
€6.00
(tax incl.)
This shunt allows to use your Bafang system without any display.
€6.50
(tax incl.)
This high-precision bearing is designed specifically for the repair and internal maintenance of electric bicycle pedal motors. With its strict dimensions of 17 x 35 x 8 mm, it has a reinforced sealing (RS) that...
€7.50
(tax incl.)
Bafang BBS01 BBS02 BBSHD shaft needle roller bearing. Serie M215 M315 M615 MM G340 250W 500W and 750W and 1000W
Note that you have 2x bearings on your BBS01 or BBS02 motor but only one on BBSHD.
€8.90
(tax incl.)
The crank lever is the essential tool for properly removing the cranks from your bike during the installation of your electrical kit. Whether you need to mount a crankset motor or position a pedaling sensor (PAS),...
€9.00
(tax incl.)
Kit with 2x spacer 72mm to 73mm and 2x screws M6 x 15mm
€9.90
(tax incl.)
pedal sensor for Bafang central motors BBS01 BBS02 BBS01B BBS02B
replacement part
€9.90
(tax incl.)
This spacer allows you to adapt a speed sensor to a wider frame (fatbike type).
It is sold with 4 plastic clamps.
€9.90
(tax incl.)
These balls bearings have to be changed during the overhaul of your Bafang BBS01 and BBS02 central motor. You need two per motor so don't forget to add 2x pcs on your basket.
€9.90
(tax incl.)
pedal sensor for Bafang central motors BBSHD
replacement part
€10.00
(tax incl.)
Counter nut for Bafang BBS01, BBS02, BBSHD bottom bracket motor for electric bike.
€10.00
(tax incl.)
Bafang speed sensor extension cable 30cm for BBS01 BBS02 BBSHD
€10.00
(tax incl.)
Nut for Bafang BBS01, BBS02, BBSHD bottom bracket motor for electric bike.
€10.90
(tax incl.)
Motor core gasket BBS01 BBS02 BBSHD M215 M315 M615 G320 G340.
This gasket is on left side of the bike when your are sit on the bike.
€11.90
(tax incl.)
Fiber replacement gasket steel gear side at the right side of mid drive motor Bafang BBSHD M615 G320.
€12.00
(tax incl.)
Extension cable Julet for bafang display 5 pins or OZO display
30cm length
€12.00
(tax incl.)
Controller gasket for Bafang BBS01 BBS02 BBSHD M215 M315 M615 G320 G340.
€12.00
(tax incl.)
Crank arm 170mm for Bafang central motors BBS01 BBS02 BBS01B BBS02B BBSHD or all others central motors woth square bottom bracket axle. M215, M315, M615, G340
€12.90
(tax incl.)
Grease kit for Bafang central motors overhaul
We advise to change grease inside your central motor every 3000 kilometers
€12.90
(tax incl.)
Y cable wire to plug 2 sensors on one entry of your Bafang motor BBS01 BBS02 BBSHD maxdrive or any system using Julet connector 3 pins.
With this cable you can plug one or two gear sensors, and plug two brake...
€14.90
(tax incl.)
Speed sensor for Bafang central motor BBS01 BBS02 BBSHD
Speedo replacement part
€15.00
(tax incl.)
Original handlebar support for Bafang displays:
- DIsplay LCD C800
- DISPLAY LCD 965
- DISPLAY TFT 850
Used to replace the original support if it is broken.
€15.00
(tax incl.)
This tool is necessary to screw both nuts of Bafang central motor BBS01 BBS02 and BBSHD
Here you will find all the accessories in order to improve the functioning of your Bafang BBS01, BBS02 or BBSHD mid-drive motor.
Chainwheels adaptors, sensor changer, dual chainwheel kit, brake handles, BB30 adaptor, strengthened chain, handlebar display...
