€139.00
(tax incl.)
Compatible for Essential, M365, M365 PRO and PRO2.
Filters
Ebikes kits
€79.00
(tax incl.)
10" mini scooter front wheel to match with our 10'' motor.
Sold with tire and disc brake 140mm
€69.00
(tax incl.)
19" 80/100 mixte 2.75-R19 Motorcycle tire
Outside diameter 627mm
Width 80mm
€18.00
(tax incl.)
Xiaomi Pro and Pro2 Electric Scooter throttle.
€20.00
(tax incl.)
Accelerator for Xiaomi Mijia m365 Electric Scooter
€808.00
(tax incl.)
This 5000W electric rear wheel kit allows you to transform your 50cc or 125cc internal combustion motorcycle into an electric motorcycle or to create a hybrid motorcycle.
The DD55 electric wheel motor is radiated on a...
€0.70
(tax incl.)
Stainless steel spokes 13G (2,3mm diameter) Made in France
Conventional rolled 18/8 stainless steel spoke with constant wire diameter from the head to the thread.
€1.45
(tax incl.)
We can cut spokes at your convenience.
Conventional rolled 18/8 stainless steel spoke with constant wire diameter from the head to the thread.
13G spokes (2,3mm diameter)
€2.00
(tax incl.)
The clamp allows you to securely attach the components of your kit (such as the reaction arm or a bracket) directly to the bike frame. It provides a robust and durable support, perfectly resistant to the vibrations of...
€2.50
(tax incl.)
The temperature sensor for CA V3 is the essential safety accessory to protect your engine against overheating. Connected directly to your Cycle Analyst V3 on-board computer, it measures the internal temperature of...
€3.00
(tax incl.)
The torque arm clamp screws include all the necessary screws, nuts and washers to securely connect your reaction arm (torque arm) to the clamp fixed on the frame or fork of your bike.
Subject to high torsional...
€4.50
(tax incl.)
The speed sensor magnet is the essential accessory for operating your speed sensor. Simply attached to a spoke of your wheel, it passes in front of the sensor at each rotation to transmit an accurate measurement of...
€5.00
(tax incl.)
Announced price per meter
Increase the quantity to choose the length.
€5.00
(tax incl.)
External speed sensor with wheel magnet, compatible with most universal electrical controllers. It transmits the exact speed of the wheel to your screen to precisely manage the electric assistance and display your...
€7.00
(tax incl.)
To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame.
2D plan of the M5 leg
2D plan of the M6 leg
€7.00
(tax incl.)
The RCA female plug (or RCA header) is the ideal chassis connector to integrate a charging port or signal link directly into your battery or controller housing. Very common on some electric bike and scooter charging...
€8.90
(tax incl.)
Ce support d'accessoire double peut etre installer facilement sur tous les guidons de diamètre 25 mm à 31.8 mm. Il vous permettra notamment d'installer votre display ainsi que la gachette d'accélérateur au pouce....
€9.00
(tax incl.)
The chain whip is the essential tool to immobilize your cassette or freewheel during its disassembly. By blocking the sprockets to prevent them from rotating in a vacuum, it allows you to use your cassette changer...
€9.90
(tax incl.)
This tool will allow you to unscrew the cups of your square-axis bottom bracket.
€10.00
(tax incl.)
Multifunction switch with two positions.
It can be used as an ON/OFF switch for your lighting or for your OZO controller.
Supplied with 2-pin JST connector.
€10.00
(tax incl.)
This green pushing button switch is expected to be installed on a handlebar or a 22mm tube.
On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or...
€12.00
(tax incl.)
In 6.20 mm thick stainless steel
To check the installation of the torque arm on your bike, you can print the plan below, cut out the part and position it on the frame.
Plan "Base 3 M12"
€12.00
(tax incl.)
In 6.20 mm thick stainless steel
To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame.
Plan "Base 4 M12"
Plan "Base 4 M14"
€14.00
(tax incl.)
The Loctite 243 is the essential medium-strength netting brake to secure all the hardware of your electric bike against road and engine vibrations. Ideal for mounting brake discs, crankset motor mounts or torque arms,...
€15.00
(tax incl.)
Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...
€15.00
(tax incl.)
Support for potentiometer to screw on the back of the V2 or V3 analyst cycle
€16.00
(tax incl.)
The speed sensor for Cycle Analyst is the ideal accessory to accurately measure your actual speed and distance traveled on your electric bike. Connected directly to your on-board computer, this sensor works with a...
€16.00
(tax incl.)
The CA (Cycle Analyst) bracket is the ideal accessory to install your on-board computer directly in the center of your cockpit. By attaching the Cycle Analyst to the stem, you free up space on your handlebars while...
€19.00
(tax incl.)
Double combined for handlebar installation or 22mm tube.
Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any...
Limited special offer
€536.10
(tax incl.)
€546.10
The solex 250W front wheel kit is the best choice for the Solex nostalgic. This very quiet electric kit will allow you to transform your Solex bike into a hybrid vehicle. This solution allows you to keep the iconic...
€19.00
(tax incl.)
Pedal sensor compatible with the generic 250W controller for the repair of electric bikes.
2 models available: Integrated 12 magnets or V7 6 magnets
The V7 comes with a 6-magnet magnetic washer.
Cable length of 60...
€19.00
(tax incl.)
The pedal sensor is a rotation sensor. You are required to pedal for assistance and you cannot precisely dose the desired level of assistance since this level is determined by a law of assistance specific to the...
€20.00
(tax incl.)
This ebike accelerator is thumb operated.
An exact copy of the accelerators found on quads or water scooters.
Note that you can only install this accelerator if you have previously removed a derailleur lever....
€20.00
(tax incl.)
This cable allows to update your cycle analyst with the last software version and also to read and set all datas on your computer.
€25.00
(tax incl.)
This "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built...
€25.00
(tax incl.)
This half handle accelerator is compatible with all our kits.
The two-position switch can be used to turn off the engine if it is wired to the "brake off" input of the controller or to power your lighting.
€29.00
(tax incl.)
This Wattmeter is the ideal tool for all those who wish to have a reliable autonomy and power gauge.
It will allow you to have an accurate reading of the battery voltage, the power consumed and the energy consumed....
€30.00
(tax incl.)
Universal shunt 1mOhm for V2 and V3 analyst cycles. You can use the analyst cycle on any controller, solar panel, or charger. Supports a direct current of 50A and a max current of 100A
€40.00
(tax incl.)
This potentiometer is perfectly compatible with the V3 analyst cycle. It will allow you to limit the power or speed of your engine while driving without having to enter the setup.
€44.90
(tax incl.)
36V charger compatible with 1000W and 2000W electric skateboard kits.
€65.00
(tax incl.)
Double rim for fat bike. Very sturdy, it will be perfect for radiating an electric motor for your fat bike.
You can choose 65mm, 80mm or 100mm width.
Color: Black.
€65.00
(tax incl.)
Double rim for fat bike. Very sturdy, it will be perfect for radiating an electric motor for your fat bike.
You can choose two different widths: 80mm or 100mm
Color: Black.
Other colors: Please contact us.
Width...
€119.00
(tax incl.)
The OZO controller 12V 24V 36V 48V integrates high quality electronic components from the automotive world.
Dual sensored / sensorless adaptive field-oriented sinusoidal mapping (FOC) will allow you to power all...
€159.00
(tax incl.)
This OZO 35A controller is dual sensored / sensorless field oriented (FOC) sinusoidal mapping, which makes it compatible with all brushless electric motors equipped or not with hall sensors.
Temperature protection to...
€211.90
(tax incl.)
250W brushless electric hub motor kit, 125mm in diameter, supplied without battery. Perfect for electrifying a scooter, logistics trolley, picking cart, rolling table, or any other mobile base supporting a 100kg load.
Limited special offer
€282.60
(tax incl.)
€284.90
250W brushless electric hub motor kit, 160mm in diameter, supplied without battery. Ideal for electrifying a scooter, logistics trolley, picking cart, rolling table, or any other mobile base supporting a 100kg load,...
Our electric bike conversion kits can be installed on any bike : city bikes, MTB, tricycles, delivery bikes, tandems, folding bikes, cargo bikes…
In order to help you make your decision, you can read our technical information page and answer to the test to define your user profile and find the electric conversion kit that will match perfectly with your needs.
