Chargement des images...
Kelly controller programming cable for computer
Programming cable to program your kelly controller on your computer.
You will also need RS232 to USB adapter câble adaptateur RS232-USB.
€19.00
(tax incl.)
Reference:
001035
You may also like
€41.00
(tax incl.)
Specific connection kit for connecting your Kelly controller to a computer in order to access the brand’s configuration software.
€24.90
(tax incl.)
Y splitter cable to connect one throttle on both controllers. Allows to drive simultanouesly two motors with one throttle.
3 pins JST connectors compatible with OZO controllers 25A, 35A, 40A, 60A and Kelly controllers...
€36.00
(tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers.
Standard length: 35cm / Optional extension possible: 50cm, 1m,
Cable section: 10AWG / 5mm2
+ after wired contact to switch on the...
€33.60
(tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers.
Standard length: 35cm / Optional extension possible: 50cm, 1m
Cable section: 10AWG / 5mm2
+ after wired contact to switch on the...
€35.00
(tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers.
Standard length: 35cm / Optional extension possible: 45cm, 1,1m.
Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
€36.00
(tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers.
Standard length: 35cm / Optional extension possible: 45cm, 1,1m.
Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
Customers who bought this product also bought:
€399.00
(tax incl.)
3000W electric hub motor to convert light vehicle into electric.
Compatible with any rim drilled 4x100 and at least 10'' in diameter.
1000mm cable length
45km/h under 48V with 10'' wheel and 50km/h with 12'' wheel.
€30.00
(tax incl.)
Thumb throttle with Battery indicator and ON/OOF switch for Ebikes.
You can install it on the right or Left side of your handlebar.
Available in two Voltage: 36V gauge or 48V.
€2.00
(tax incl.)
XT90 Male 90A power connector
Dimensions of the connector: Length 2.5 cm / Width 1 cm / Height 2.2 cm
TECHNICAL SHEET
€24.90
(tax incl.)
Capacity indicator for Lead-acid, Li-ION or LiFePO4 battery. Input voltages from 10 to 100V. Displays the remaining battery percentage, temperature and voltage.
€30.00
(tax incl.)
Electric motorcycle throttle handle with 1m cable and 3x pins female Julet Z309AM waterproof connector.
Compatible with all OZO controllers.
€399.00
(tax incl.)
This Brushless PMSM Electric Motor (Permanent Magnet Inner Rotor Motor) with Hall effect sensors is designed to deliver a power of 1500W at 48V, generating a torque of 25 N.m and a maximum rotational speed of 4800...
€20.00
(tax incl.)
This ebike accelerator is thumb operated.
An exact copy of the accelerators found on quads or water scooters.
Note that you can only install this accelerator if you have previously removed a derailleur lever.
Supplied...
€399.00
(tax incl.)
This 5000W motor gets 55mmm magnets and can accepts up to 5000W power and 1000Km/h speed.
Weight : 10, kg | dropout : 150mm
Pmax = 5000W / Pnom = 4000W
Max torque = 145N.m
Kv 10 Tr/min/Volt
Leave a review