DONKEY front hub brushless motor 250W 500W 750W

€269.00 (tax incl.)
IN STOCK 26 Items
Reference:
000779
You may also like
€460.00 (tax incl.)
This 5000W motor gets 55mmm magnets and can accepts up to 5000W power. Weight : 9,8 kg | dropout : 150mm Pmax = 5000W / Pnom = 4000W Max torque = 170N.m Delivered with a 200mm cable length
€304.10 (tax incl.)
The ROLLER front-wheel motor is a 250W electric hub motor of the reduced type, delivering 40N.m of torque. This motor is designed for the ROLLER BRAKE brakes generally found on Dutch bikes (Gazelle, Batavus,...
€378.20 (tax incl.)
The FH212 is an upgraded version of the DD27, as its design provides more clearance for the brake caliper. Considered the best direct-drive motor on the market, it offers incomparable riding comfort and a high top...
€304.10 (tax incl.)
The RUNNER front hub motor is a 250W geared electric motor that delivers 40Nm of torque. Certified EN15194, the Bobber motor complies with EPAC (Electric Pedal Assisted Cycle) standards. This electric front hub...
€374.10 (tax incl.)
The DONKEY motor is a 500W front hub motor, ideal for cargo bikes with 20'' or 24'' wheels. 25km/h on a 20'' wheel with a 36V battery, or 32km/h under 48V. Geared electric hub motor.
Product Details
000779

Data sheet

Guarantee
2 ans
Couple max sur roue de 26 pouces
?????
Intensité max
????
Mass
3,8kg
Type
réducté 1:5
Rendement
82%
Puissance max
???
Régime de rotation
????
Compatibilité frein à disque
OUI
Cable de puissance
???
Diamètre de roue mini
à partir de 18''
Tension Max
????
Reviews
No comments

Leave a review

  • Quality:
Describe this product using simple and short words.
Upload images:
Drop images here or click to upload.
Frequently questions

Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Customers who bought this product also bought:
€42.90 (tax incl.)
The puncture-proof tire.It offers the best protection against the risk of punctures but also the following characteristics: - rolling resistance (patented SmartGuard underlay)- recycling- anti-aging effect (special...
Base 1 Base 1
Limited special offer
€19.00 (tax incl.) €21.50
The Torque Arm allows to limit the stress on the bike frame, at the level of the wheel fixing beaks, to avoid any deformation. It is highly recommended for kits over 400W.
€12.90 (tax incl.)
Y cable wire to plug 2 sensors on one entry of your Bafang motor BBS01 BBS02 BBSHD maxdrive or any system using Julet connector 3 pins. With this cable you can plug one or two gear sensors, and plug two brake...
€29.90 (tax incl.)
The MACH1 KARGO rim is a robust rim for bicycles that can withstand heavy loads over thousands of miles.
€3.50 (tax incl.)
Essential electronic component allowing the controller to know the exact position of the rotor to ensure a smooth start and an optimal management of the phases of the motor (compatible wheel motor and pedal motor)....
€8.00 (tax incl.)
This extension cable has a 3-way JST connector for pedal sensor or accelerator. With switch 3-Position. Available in 3 lengths : 30 cm 50 cm 100 cm
€7.00 (tax incl.)
To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame. 2D plan of the M5 leg 2D plan of the M6 leg
Close
Click for more products.
No products were found.

Settings

Click for more products.
No products were found.

Menu