€1.60
(tax incl.)
Screws for Bafang crankset motor plate.
Sold by 5.
Filters
Accessories for mid drive motors Bafang
€2.00
(tax incl.)
Bottom bracket for offsetting the Bafang pedal motor if it touches the frame bases, which can be the case on fat bikes or fat bikes.
These spacers can also be used to offset the freewheel body on an in-wheel motor....
€3.90
(tax incl.)
Grease kit for Bafang central motors overhaul
We advise to change grease inside your central motor every 3000 kilometers
€4.50
(tax incl.)
gasket for Bafang bottom bracket shaft on central Bafang motors BBS01 BBS02. M215 , M315 G340 250W 500W et 750W
€4.50
(tax incl.)
Grease kit for Bafang central motors overhaul
We advise to change grease inside your central motor every 3000 kilometers
€4.50
(tax incl.)
gasket for Bafang bottom bracket axle on central motors BBSHD.
€5.00
(tax incl.)
Original protective cover for Bafang pedal motor.
Only compatible with Bafang BBS01/BBS02 pedals.
Available in 44 teeth or 46/48 teeth
Not compatible with BBSHD.
€5.90
(tax incl.)
Grease kit for Bafang central motors overhaul
We advise to change grease inside your central motor every 3000 kilometers
€6.00
(tax incl.)
This shunt allows to use your Bafang system without any display.
€7.50
(tax incl.)
Bafang BBS01 BBS02 BBSHD shaft needle roller bearing. Serie M215 M315 M615 MM G340 250W 500W and 750W and 1000W
Note that you have 2x bearings on your BBS01 or BBS02 motor but only one on BBSHD.
€9.00
(tax incl.)
Kit with 2x spacer 72mm to 73mm and 2x screws M6 x 15mm
€9.90
(tax incl.)
These balls bearings have to be changed during the overhaul of your Bafang BBS01 and BBS02 central motor. You need two per motor so don't forget to add 2x pcs on your basket.
€9.90
(tax incl.)
pedal sensor for Bafang central motors BBSHD
replacement part
€9.90
(tax incl.)
pedal sensor for Bafang central motors BBS01 BBS02 BBS01B BBS02B
replacement part
€9.90
(tax incl.)
This spacer allows you to adapt a speed sensor to a wider frame (fatbike type).
It is sold with 4 plastic clamps.
€10.00
(tax incl.)
Counter nut for Bafang BBS01, BBS02, BBSHD bottom bracket motor for electric bike.
€10.00
(tax incl.)
Bafang speed sensor extension cable 30cm for BBS01 BBS02 BBSHD
€10.00
(tax incl.)
Nut for Bafang BBS01, BBS02, BBSHD bottom bracket motor for electric bike.
€10.90
(tax incl.)
Motor core gasket BBS01 BBS02 BBSHD M215 M315 M615 G320 G340.
This gasket is on left side of the bike when your are sit on the bike.
€11.90
(tax incl.)
Fiber replacement gasket steel gear side at the right side of mid drive motor Bafang BBSHD M615 G320.
€12.00
(tax incl.)
Extension cable Julet for bafang display 5 pins or OZO display
30cm length
€12.00
(tax incl.)
Controller gasket for Bafang BBS01 BBS02 BBSHD M215 M315 M615 G320 G340.
€12.00
(tax incl.)
Crank arm 170mm for Bafang central motors BBS01 BBS02 BBS01B BBS02B BBSHD or all others central motors woth square bottom bracket axle. M215, M315, M615, G340
€12.90
(tax incl.)
Grease kit for Bafang central motors overhaul
We advise to change grease inside your central motor every 3000 kilometers
€12.90
(tax incl.)
Y cable wire to plug 2 sensors on one entry of your Bafang motor BBS01 BBS02 BBSHD maxdrive or any system using Julet connector 3 pins.
With this cable you can plug one or two gear sensors, and plug two brake...
€14.90
(tax incl.)
Speed sensor for Bafang central motor BBS01 BBS02 BBSHD
Speedo replacement part
€15.00
(tax incl.)
This tool is necessary to screw both nuts of Bafang central motor BBS01 BBS02 and BBSHD
€15.00
(tax incl.)
Original handlebar support for Bafang displays:
- DIsplay LCD C800
- DISPLAY LCD 965
- DISPLAY TFT 850
Used to replace the original support if it is broken.
€15.00
(tax incl.)
Electronic card on which the magnet of the pedal sensor passes.
€17.00
(tax incl.)
For 7/8 speed
• 1/2” x 3/32", 114 links, 7.3 mm
• longevity and excellent traction thanks to reinforced bolts
• 8-speed, with MissingLink X-8 quick coupler
• Usable for: 18-21-24 speed HG
€19.00
(tax incl.)
Primary reduction nylon gear for Bafang central mid motors BBS01 BBS02 M215 M315
Original spare part from BAFANG
€19.90
(tax incl.)
Bottom bracket freewheel for Bafang central motor BBS01B /BBS02B
€20.00
(tax incl.)
With this magnetic sensor you can cut off your Bafang middle motor and conserve your original hydraulic lever.
Can fit the whole range of Bafang middle drive motor : BBS01, BBS02, BBSHD, Maxdrive...
Can be used on...
€20.00
(tax incl.)
Bafang secondary reduction gear cover
replacement part
€20.00
(tax incl.)
Bafang ebrake for BBS01 BBS02 BBSHD Maxdrive
Can also be plugged on any ebikes with Julet waterproof connector 3 pins.
€20.00
(tax incl.)
brake sensor for road bikes.
Can fit on all Bafang middle motor BBS01 BBS02 BBSHD or Maxdrive or any system using Julet waterproof connector 3 pins
€20.00
(tax incl.)
Bottom bracket freewheel for Bafang central motor BBS01B /BBS02B
€20.00
(tax incl.)
This spacer allows you to offset the attachment of the derailleur to allow the use of a double plate on a Bafang BBS01 or BBS02 pedal engine.
€25.00
(tax incl.)
Primary reduction gear for Bafang central motors BBS01 BBS02 BBS01B BBS02B
€25.00
(tax incl.)
Cable harness to connect your display to your OZO mid motor.
€25.00
(tax incl.)
Replacement selector for the OZO vertical color display.
€25.90
(tax incl.)
With this adapter you can install your Bafang central motor BBS01 BBS02 or BBSHD into your BB30 bottom bracket. BB30 is 41,96mm internal diameter as you can find on many Cannondale or specialized bikes.
€33.80
(tax incl.)
Tool pack for installing the Bafang crankset motor on a square axle crankcase.
This pack includes
- 1 torque wrench
- 1 crank extractor
- 1 square axle crankcase remover
€35.00
(tax incl.)
2x crank screws, 5x plate screws, nut, lock nut, mounting plate, 5x bash screws.
€39.00
(tax incl.)
Miche Supertype trays with Campagnolo 5x135 road standard, perfectly compatible with the associated 5-hole adapter.
High-quality machined plates made of 7075 aluminum to ensure good longevity against the torque of...
€39.00
(tax incl.)
Derailleur sensor compatible with Bafang BBS01, BBS02, BBSHD and MaxDrive, designed to automatically turn off the engine assistance during a gear change.
This essential accessory protects your drivetrain (chain,...
€39.00
(tax incl.)
Chainring adapter 4x104 BCD for Bafang BBS01 BBS02
With this adapter you can adapt any 4 holes 4x104 chainring and even add double transmission on your ebikes.
CNC machined Aluminium 7075
Made in France
Only for...
€39.90
(tax incl.)
Miche Supertype chainrings to the 4x104 MTB standard perfectly compatible with the associated 4-hole adapter.
High quality chainrings machined in Aluminum 7075 to ensure good longevity against the torque of Bafang...
€44.00
(tax incl.)
chainring adapter 5 holes for Bafang central motors BBS01 BBS02
Available in 5x130mm / 5x135mm / 5x110mm
With this adapter you can adapt any 5 holes chainring on your Bafang"s motor and even add double transmission....
€45.00
(tax incl.)
The essential tool for proper torque installation of your Bafang mid-drive motor
This locking socket is specifically designed for the main nut of Bafang BBS01, BBS02, and BBSHD mid-drive motors.Strong and precise, it...
€45.00
(tax incl.)
The essential tool for torque installation of your Bafang M400 mid-drive motor
This clamp socket is specifically designed for the Bafang M400 mid-drive motor. Strong and precise, it allows you to perform torque...
€45.00
(tax incl.)
With these adapters you will be able to install your Bafang BBS01, BBS02 or BBSHD into PF30 or spécialized bike
€45.00
(tax incl.)
With these adapters you will be able to install your Bafang BBS01, BBS02 or BBSHD into any Shimano pressfit bottom bracket or GXP with internal diameter of 41mm
€49.00
(tax incl.)
Reinforced KMC chain for use on electric bikes with pedal motor. High resistance chain.
• 1/2” x 11/128", 122 links
• longevity and excellent traction thanks to the reinforced bolts
• 11 speeds with MissingLink X11E...
€49.00
(tax incl.)
For 9 gears
• 1/2” x 11/128", 136 links, 6.6 mm, silver
• longevity and excellent traction thanks to reinforced bolts
• 9-speed, with MissingLink X-9E quick coupler
• HT-e Hi-Torsion Resistance
€49.00
(tax incl.)
Special MTB plate in 32, 34, 36 or 38 teeth NARROW WIDE black anti-derailment.
This plate machined in Aluminum 7075 will be the best choice for mountain biking with your Bafang crankset motor.
Perfectly adaptable on...
€49.00
(tax incl.)
KMC e10 reinforced chain for 10-speed transmission specifically developed for electric bicycles with pedal motor.
• 1/2” x 11/128", 122 links, 5.88 mm, silver
• longevity and excellent traction thanks to the...
€55.00
(tax incl.)
Narrow Wide Chainring for Bafang BBS01 / BBS02 Mid-Drive Motor – 36 Teeth
The 36T chainring is compatible with 7, 8, 9, 10, and 11-speed chains.
CNC-machined from 7075 aluminum, it weighs only 100 grams compared to...
€79.00
(tax incl.)
Bafang BBS02 MM G340 500 et 750W replacement rotor.
€79.00
(tax incl.)
Offset Narrow Wide chainring for Bafang BBSHD crankset engine. CNC machined in Alu 7075, which gives them great longevity and a weight gain of 400g compared to the original steel tabletop.
The torque gain is...
€102.00
(tax incl.)
The short transmission pack increases torque, making it easier for steep climbs and rough terrain in mountain biking or hauling heavy loads with a cargo bike. The small chainring allows for a more efficient...
€119.00
(tax incl.)
The secondary steel gear for BBSHD comes as shown on picture with :
- bearings- Freewheel- hood
€146.40
(tax incl.)
A complete kit to allow you to service your Bafang BBS01, BBS02 motor yourself.
€129.00
(tax incl.)
This secondary gears is composed of:
- bottom bracket axle- steel crown- bottom bracket freewheel- bottom bracket sensor for BBS motor
you will receive all above items fully assembled for an easy maintenance of your...
€132.00
(tax incl.)
A complete kit to allow you to service your Bafang BBSHD motor yourself.
€149.00
(tax incl.)
Easily add a motor cut-off to your e-bike equipped with hydraulic brakes!
This high-performance 4-piston hydraulic brake delivers powerful and progressive braking, and features an integrated motor cut-off sensor...
€159.00
(tax incl.)
controller for Bafang BBS01 BBS02 BBS01B BBS02B MM G340 serie 36V 48V 250W 500W 750W. Original spare part.
€169.00
(tax incl.)
Diagnose, Update, and Maintain Your Bafang Motor with Ease
The Bafang BESST Tool (Bafang Electric Smart Service Tool) is an essential accessory for any e-bike owner with a Bafang mid-drive motor. This official tool...
€179.00
(tax incl.)
Spare controller for Bafang BBSHD crankset motors.
€199.00
(tax incl.)
Stator and rotor replacement part for BBSHD motor 68mm length.
€15.00
(tax incl.)
Original Bafang chainring for mid drive motor BBS01 and BBS02 (M215 and M315).
44T is great for city bikes and 46T is good choice for road bicycles.
€19.00
(tax incl.)
Allows the assembly of the Bafang BBS01 or BBS02 crankset motor on an American standard crankset or a BMX box with an internal diameter of 51.4mm.
€17.00
(tax incl.)
For single speed
• 1/2” x 3/32", 112links, 8.0 mm
• longevity and excellent traction thanks to the reinforced bolts
• Mono-vit, with MissingLink Mono quick coupler
• Usable for: BMX / Trial / Gear hub / Single speed
€19.00
(tax incl.)
BBSHD 46T steel chainring.
Can be mounted only on BBSHD motor
€25.00
(tax incl.)
Bafang Eb-bus wiring harness for central motors BBS01 BBS02 BBSHD
€39.00
(tax incl.)
Miche Supertype 5-hole Shimano 130 BCD 5x130mm road standard chainrings perfectly compatible with our 5-hole adapter for Bafang pedal motor.
High quality chainrings, machined in Aluminum 7075 for better resistance to...
€39.00
(tax incl.)
Miche Supertype 5-hole standard road 110 BCD 5x110mm chainrings perfectly compatible with our 5-hole adapter for Bafang pedal motor.
High quality chainrings, machined in Aluminum 7075 for better resistance to the high...
€79.00
(tax incl.)
OZO offers you to choose from three models of displays with Bafang protocol UART 5.2 and 5.8 with cylindric green 5 pins female connector.
Compatible with all bbs series central motor from Bafang and some OZO hub...
€55.00
(tax incl.)
175mm crank arm with 13mm offset.
Really good for mountain bike, fat bike or heavy riders
€99.00
(tax incl.)
Easily add a motor cut-off to your electric bike equipped with hydraulic brakes!This hydraulic brake provides powerful, progressive braking and integrates an electric cut-off compatible with JULET 2-PIN male red...
Here you will find all the accessories in order to improve the functioning of your Bafang BBS01, BBS02 or BBSHD mid-drive motor.
Chainwheels adaptors, sensor changer, dual chainwheel kit, brake handles, BB30 adaptor, strengthened chain, handlebar display...
