Filters
Controllers
€12.00
(tax incl.)
Extension cable Julet for bafang display 5 pins or OZO display
30cm length
€10.00
(tax incl.)
Multifunction interruptor with 2 positions
It can be used as a switch for your lighting or your OZO controller
Delivered with 2 JST ways connector
€10.00
(tax incl.)
Multifunction switch with two positions.
It can be used as an ON/OFF switch for your lighting or for your OZO controller.
Supplied with 2-pin JST connector.
€19.00
(tax incl.)
Programming cable to program your kelly controller on your computer.
You will also need RS232 to USB adapter câble adaptateur RS232-USB.
€35.00
(tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers.
Standard length: 35cm / Optional extension possible: 50cm, 1m,
Cable section: 10AWG / 5mm2
+ after wired contact to switch on the...
€10.00
(tax incl.)
Multifunction interruptor with 2 positions
It can be used as a switch for your lighting or your OZO controller
Delivered with 2 JST ways connector
€35.00
(tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers.
Standard length: 35cm / Optional extension possible: 45cm, 1,1m.
Cable section: 10AWG / 5mm2 + after wired contact to switch on...
€12.00
(tax incl.)
Multifunction two-position switch.
It can be used as a forward/reverse switch, ON/OFF for your lighting, or for your OZO controller.
Supplied with a 2-way JST connector.
€12.00
(tax incl.)
This push button is designed for installation on a 22mm handlebar or tube.
On a bicycle or motorcycle, it can be used to ground the engine, deactivate the cruise control, or activate the horn. On a cart, it can be...
€14.99
(tax incl.)
This bracket allows to fix the controller under the frame and to let the cables of the derailleur and the brake pass easily.
€20.00
(tax incl.)
Universal thumb throttle 0-5V linear. Easy to install on 22mm pipe
The controller (also called variator) is the brain of your electric bike motorization kit. It is an electronic case that manages the motor. The controller receives an information (control signal) from the pedelec or from the full twist throttle and manages the motor power according to this information.
All of our controllers initially include: Anderson Powerpole connectors for power, JST connectors for control, the possibility to connect a throttle or a pedelec, a cut off brake and a cycle analyst.
Our controllers for electric bikes can work with several voltages. This means that you can supply the controllers with various voltages 24V, 36V, 48V and even 72V for some models. To understand better the various controllers’ technologies, please have a look at our “technical information”page.
