Chargement des images...
Rear rack battery bag
This bag is really convenient to install your ebike battery.
This bag is ideal for installing a PVC battery on your luggage rack. Available in two sizes (small and large), you can choose an optional neiman with 30A and Anderson PP30 connectors. This neiman will allow you to have an on / off contact on your system.
Then you will just need to connect the PVC battery inside the bag.
€44.90
(tax incl.)
Reference:
000737
You may also like
€39.95
(tax incl.)
This frame bag has been designed to accompany all cycling adventurers, whether on road, gravel, mountain bike or touring bikes. The Z Adventure C4 are mounted on all bikes thanks to the removable and adjustable...
€20.00
(tax incl.)
The Z Frame Pack is a frame bag which is mounted on the horizontal tube at the rear. It is ideal for carrying tools, a mini pump, energy bars, a phone, a rain gear ...
Dimensions: 270 x 100 x 80mm / 10.6 x 3.9 x 3.2 "
€54.90
(tax incl.)
Battery bag frame that allows to install all our PVC batteries : 36V9Ah ; 36V 12Ah; 36V 14Ah ; 48V 12Ah; 48V 14Ah.
You can select to get one neiman with Key.
Dimensions = 29 x 8,5 x 9,2cm
€69.00
(tax incl.)
The best choice to carry any goods on your bike.
€199.00
(tax incl.)
backpack Evoc trail E-Ride 20L back protector ideal for VTTAE practice
€54.90
(tax incl.)
This large triangle bag will be perfect for integrating a 36V or 48V battery on your electric bike. Its skai coating makes it waterproof.
Optionally, you can add a neiman supporting 30A. This neiman is already wired...
€35.00
(tax incl.)
This bag is suitable for batteries 36V9Ah 11.6Ah 14.5Ah 48V12Ah and 14Ah, Bosch powerpack 300, 400Wh and 500 Wh, Shimano steps 500 and Giant Energypack.
At the back of the bag, you can fix a 15 Lumens security light
Two different sizes
Small
- Length : 300mm
- Width : 140mm
- High : 100mm
Large
- Length : 350mm
- width : 200mm
- High 1 : 150mm
- High 2 : 200mm (you can increase the high with the zipper)
Customers who bought this product also bought:
€20.00
(tax incl.)
Pedal sensor for 15A and 22A OZO controllers to be installed on the vertical frame tube
Supplied with the 12-magnet half discs and the probe.
3-way Julet waterproof connector.
Cable length: 120 mm.
End to end...
€12.90
(tax incl.)
Solar recharge wire Anderson to RCA male or female for cycle analyst
€20.00
(tax incl.)
Kingmeter pas sensor 12 magnets with waterproof connector Julet Z309AG yellow.
Matching with all 15A and 22A OZO controllers.
câble length : 150 mm.
€0.20
(tax incl.)
The female JST contact is the metal terminal that is essential for making or repairing the wiring of your small electric bike accessories (console, accelerator, sensors). Designed to be crimped on your wires, it fits...
€54.90
(tax incl.)
This bag is really convenient to install your ebike battery.
This bag is ideal for installing a PVC battery on your luggage rack. Available in two sizes (small and large), you can choose an optional neiman with 30A...
€12.00
(tax incl.)
Multifunction two-position switch.
It can be used as a forward/reverse switch, ON/OFF for your lighting, or for your OZO controller.
Supplied with a 2-way JST connector.
€90.00
(tax incl.)
The OZO 15A Controller, equipped with Field-Oriented Control (FOC) technology, ensures optimal performance for OZO Brushless motors. Its IP6-rated tropicalization and waterproof connectors provide exceptional...
Leave a review