Chargement des images...
Base 1
To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame.
"Base 1 M12" plan
"Base 1 M14" plan
€10.00
(tax incl.)
Reference:
001897
You may also like
Limited special offer
Limited special offer
Limited special offer
€25.00
(tax incl.)
€28.50
The base 3 is in stainless steel of 6.20mm thickness.
To check the installation of the torque arm on your bike, you can print the plan below, cut the part and position it on the frame.
Plan "Base 3 M12"
Limited special offer
€19.00
(tax incl.)
€21.50
The Torque Arm allows to limit the stress on the bike frame, at the level of the wheel fixing beaks, to avoid any deformation.
It is highly recommended for kits over 400W.
€21.00
(tax incl.)
This hexagonal base offers angular freedom that allows it to adapt to all frame geometries.
To check the installation of the torque arm on your bike, you can print the plan below, cut out the part and position it on...
Customers who bought this product also bought:
€299.00
(tax incl.)
OZO offers a wide range of 36V Lithium batteries to tailor your electric experience.
Choose your battery capacity based on your desired range. A 1000Wh battery provides twice the range of a 500Wh battery.
Our 36V...
€24.90
(tax incl.)
Capacity indicator for Lead-acid, Li-ION or LiFePO4 battery. Input voltages from 10 to 100V. Displays the remaining battery percentage, temperature and voltage.
€2.00
(tax incl.)
Bottom bracket for offsetting the Bafang pedal motor if it touches the frame bases, which can be the case on fat bikes or fat bikes.
These spacers can also be used to offset the freewheel body on an in-wheel motor....
€0.70
(tax incl.)
This Anderson metal contact is the essential element to finalize your Powerpole connectors and ensure a perfect electrical connection. Designed to be crimped or welded on your cables, it fits directly into the...
€10.00
(tax incl.)
Multifunction interruptor with 2 positions
It can be used as a switch for your lighting or your OZO controller
Delivered with 2 JST ways connector
€105.00
(tax incl.)
The OZO 22A Controller, equipped with Field-Oriented Control (FOC) technology, ensures optimal performance for OZO Brushless motors. Its IP6-rated tropicalization and waterproof connectors provide exceptional...
€30.00
(tax incl.)
Thumb throttle with Battery indicator and ON/OOF switch for Ebikes.
You can install it on the right or Left side of your handlebar.
Available in two Voltage: 36V gauge or 48V.
€7.00
(tax incl.)
To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame.
2D plan of the M5 leg
2D plan of the M6 leg
Leave a review