Chargement des images...
hexagonal base
This hexagonal base offers angular freedom that allows it to adapt to all frame geometries.
To check the installation of the torque arm on your bike, you can print the plan below, cut out the part and position it on the frame.
2D plane of the hexagonal base
€21.00
(tax incl.)
Reference:
001895
You may also like
Limited special offer
Limited special offer
Limited special offer
€25.00
(tax incl.)
€28.50
The base 3 is in stainless steel of 6.20mm thickness.
To check the installation of the torque arm on your bike, you can print the plan below, cut the part and position it on the frame.
Plan "Base 3 M12"
Limited special offer
€19.00
(tax incl.)
€21.50
The Torque Arm allows to limit the stress on the bike frame, at the level of the wheel fixing beaks, to avoid any deformation.
It is highly recommended for kits over 400W.
€50.00
(tax incl.)
Gift voucher worth 50 € to 200 €
Valid for 1 year on all products on the site
Hexagonal Base Plan
Customers who bought this product also bought:
€20.00
(tax incl.)
This universal adapter allows to create new fixing points on the frame of the bike by picking up the fixings of the original bottle holder, in order to facilitate the installation of batteries frames 500Wh, 700Wh,...
€25.00
(tax incl.)
Main wiring harness (Eb-bus) for 15A and 22A OZO controller working with Bafang protocol.
€15.00
(tax incl.)
Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...
€2.00
(tax incl.)
hub motor nut
M12 for all motors from 250W to 750W
M14 for 1000W motors
€549.00
(tax incl.)
OZO has been assembling 48V PVC batteries in France since 2013 with Panasonic Lithium cells and a high performance BMS.
You have free choice of battery for your electric bike according to the desired range. We offer...
€199.00
(tax incl.)
The V3 Cycle Analyst is the next step for the CA product line to not only monitor what is going on in an ebike, but also control it. In the V2 CA we included basic throttle over-ride capabilities for speed, current,...
€39.90
(tax incl.)
Charger for Lithium battery of VAE, electric bike and electric scooter equipped with a Lithium 48V LiMn battery.
We offer 3 charging current values, directly influencing the speed of the battery recharge.
The...
€199.00
(tax incl.)
The "little Fat" engine is the little brother of the "FATTY".
3.6kg for 55 Nm of torque
It can accept between 250W and 500W of power.
We advise you to power it with a 36V 15A or 36V 22A or 48V 15A controller.
On a...
Leave a review