€0.50
(tax incl.)
Motor shaft spacers are available for any kind of ebikes motor hub and allows to center the wheel inside the frame.
Filters
Spare parts
€1.60
(tax incl.)
Screws for Bafang crankset motor plate.
Sold by 5.
€2.00
(tax incl.)
Bottom bracket for offsetting the Bafang pedal motor if it touches the frame bases, which can be the case on fat bikes or fat bikes.
These spacers can also be used to offset the freewheel body on an in-wheel motor....
€3.90
(tax incl.)
Grease kit for Bafang central motors overhaul
We advise to change grease inside your central motor every 3000 kilometers
€2.00
(tax incl.)
hub motor nut
M12 for all motors from 250W to 750W
M14 for 1000W motors
€3.00
(tax incl.)
Set of 6 screws for cassette holder of Freerider engine.
Sold without cassette holder.
€4.50
(tax incl.)
gasket for Bafang bottom bracket axle on central motors BBSHD.
€3.60
(tax incl.)
Set of 6 screws for cassette holder of Bobber engine.
Sold without cassette holder.
€4.50
(tax incl.)
gasket for Bafang bottom bracket shaft on central Bafang motors BBS01 BBS02. M215 , M315 G340 250W 500W et 750W
€4.50
(tax incl.)
Grease kit for Bafang central motors overhaul
We advise to change grease inside your central motor every 3000 kilometers
€5.00
(tax incl.)
Original protective cover for Bafang pedal motor.
Only compatible with Bafang BBS01/BBS02 pedals.
Available in 44 teeth or 46/48 teeth
Not compatible with BBSHD.
€5.90
(tax incl.)
Grease kit for Bafang central motors overhaul
We advise to change grease inside your central motor every 3000 kilometers
€6.00
(tax incl.)
This shunt allows to use your Bafang system without any display.
€15.00
(tax incl.)
Cable extension for electric bicycle hub motor with waterproof connector 9 Pins Julet Z910AT
Available in three lengths:
- 30cm
- 45cm
- 110cm
€7.50
(tax incl.)
Bafang BBS01 BBS02 BBSHD shaft needle roller bearing. Serie M215 M315 M615 MM G340 250W 500W and 750W and 1000W
Note that you have 2x bearings on your BBS01 or BBS02 motor but only one on BBSHD.
€30.00
(tax incl.)
transmission gear for central electric motor OZO. Compatible with 1'' shaft (25,4mm) as all central motor from OZO : moteurs centraux OZO
10 teeth - pas 520 - key 6,35m (1/4'')
10 dents - pas 520 - key 8mm
12...
€8.90
(tax incl.)
The crank lever is the essential tool for properly removing the cranks from your bike during the installation of your electrical kit. Whether you need to mount a crankset motor or position a pedaling sensor (PAS),...
€9.00
(tax incl.)
Kit with 2x spacer 72mm to 73mm and 2x screws M6 x 15mm
€9.90
(tax incl.)
pedal sensor for Bafang central motors BBS01 BBS02 BBS01B BBS02B
replacement part
€9.90
(tax incl.)
This spacer allows you to adapt a speed sensor to a wider frame (fatbike type).
It is sold with 4 plastic clamps.
€9.90
(tax incl.)
These balls bearings have to be changed during the overhaul of your Bafang BBS01 and BBS02 central motor. You need two per motor so don't forget to add 2x pcs on your basket.
€9.90
(tax incl.)
pedal sensor for Bafang central motors BBSHD
replacement part
€10.00
(tax incl.)
Counter nut for Bafang BBS01, BBS02, BBSHD bottom bracket motor for electric bike.
€10.00
(tax incl.)
Bafang speed sensor extension cable 30cm for BBS01 BBS02 BBSHD
€49.00
(tax incl.)
gear clutch and freewheel Fatty Bafang RMG06
€10.00
(tax incl.)
Nut for Bafang BBS01, BBS02, BBSHD bottom bracket motor for electric bike.
€49.00
(tax incl.)
Gear cluster and freewheel clutch for MAC motors and EZEE and PUMA motors
Available in 17mm or 21mm
€10.90
(tax incl.)
Motor core gasket BBS01 BBS02 BBSHD M215 M315 M615 G320 G340.
This gasket is on left side of the bike when your are sit on the bike.
€65.00
(tax incl.)
This epicyloidal gears can let you fix your OZO motors Freerider and Donkey but also some others brands as XOFO, XFV, XFVK, XFVF, Trotrx, Globe3T, Gravity, Cyclotec...
Dimensions:
External gear diameter : 54mm...
€11.90
(tax incl.)
Fiber replacement gasket steel gear side at the right side of mid drive motor Bafang BBSHD M615 G320.
€2.00
(tax incl.)
Cassette spacer is needed if you want to install 7 or 8 speeds cassette on our Motor hub originally designed for 9 and 10 speeds.
To install 7 speed cassette you can choose 3mm spacer.
1mm spacer for 8 speed cassette
€12.00
(tax incl.)
Extension cable Julet for bafang display 5 pins or OZO display
30cm length
€199.00
(tax incl.)
Stator and rotor replacement part for BBSHD motor 68mm length.
€12.00
(tax incl.)
Controller gasket for Bafang BBS01 BBS02 BBSHD M215 M315 M615 G320 G340.
€12.00
(tax incl.)
Crank arm 170mm for Bafang central motors BBS01 BBS02 BBS01B BBS02B BBSHD or all others central motors woth square bottom bracket axle. M215, M315, M615, G340
