Filters
Composant ki
€14.00
(tax incl.)
handset with one pushing button and one ON/OFF switch for handlebar installation or 22mm tube.
Delivered with a 2 ways JST connector and a 1100mm cable length
€29.00
(tax incl.)
his accelerator for electric bicycles is activated with the thumb.
Cable length: 1m
This model is versatile, meaning you can install it on the right or left side of your handlebar.
This set includes a waterproof...
€999.00
(tax incl.)
Special retrofit for boats, motorcycles, go-karts, ATVs, or sailboats, this IPM brushless electric motor with a central rotor is designed to deliver a power output of 6kW to 10kW depending on the supply voltage of...
€12.00
(tax incl.)
In 6.20 mm thick stainless steel
To check the installation of the torque arm on your bike, you can print the plan below, cut out the part and position it on the frame.
Plan "Base 3 M12"
€29.90
(tax incl.)
The MACH1 260 rim is a robust French-made rim for bicycles supporting heavy loads over thousands of kilometers.
Available in 20 '', 24 '', 26 '', 27.5 '' and 28 ''
36 holes, double wall surfaced compatible with pad...
€20.00
(tax incl.)
Kingmeter pas sensor 12 magnets with waterproof connector Julet Z309AG yellow.
Matching with all 15A and 22A OZO controllers.
câble length : 150 mm.
€19.00
(tax incl.)
Programming cable to program your kelly controller on your computer.
You will also need RS232 to USB adapter câble adaptateur RS232-USB.
€35.00
(tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers.
Standard length: 35cm / Optional extension possible: 50cm, 1m,
Cable section: 10AWG / 5mm2
+ after wired contact to switch on the...
€25.00
(tax incl.)
ANDERSON to JULET Z209AG adapter. Allows to install ebikes lights by connecting in series between batetry and controller
€1,490.00
(tax incl.)
Especially designed for motorcycle, karting, boat, or sailboat
Specially designed for retrofitting boats, motorcycles, karts, quads or sailboats, this IPM brushless electric motor with central rotor is designed to...
€20.00
(tax incl.)
Macthing SHIMANO MT200/MT401Adding
Motor power off brake sensor make cycling safer
Easy assembly and no change with the original brakestructure
Braking signal sensitivity is adjustable by user
Waterproof rating:...
€29.00
(tax incl.)
his accelerator for electric bicycles is activated with the thumb.
Cable length: 1m
This model is versatile, meaning you can install it on the right or left side of your handlebar.
This set includes a waterproof...
€29.90
(tax incl.)
The MACH1 KARGO rim is a robust rim for bicycles that can withstand heavy loads over thousands of miles.
€30.00
(tax incl.)
Thumb throttle with Battery indicator and ON/OOF switch for Ebikes.
You can install it on the right or Left side of your handlebar.
Available in two Voltage: 36V gauge or 48V.
€20.00
(tax incl.)
Contact brake handle compatible with the 22A OZO controller
You can buy a right handle or a left or the pair.
Two colors available: Gray or black.
€25.00
(tax incl.)
Magnet ring specially designed for carbon frame road bicycle with compact crankset.
€199.00
(tax incl.)
Central brushless BLDC motor that can deliver 500W under 24V, 750W under 36V and 1000W unde 48V. Can drive any rotating tools or small kids electric motorcycle or scooter.
Max speed is 3500 Tr/min under 48V
Max...
Limited special offer
€19.00
(tax incl.)
€21.50
The Torque Arm allows to limit the stress on the bike frame, at the level of the wheel fixing beaks, to avoid any deformation.
It is highly recommended for kits over 400W.
OZO offers a wide range of components for electric bicycles for the optimization or repair of electric bicycles with wheel motor or pedal motor.
