Filters
Controllers
€179.00
(tax incl.)
Controller 48V to 72V - 40A dual sensored sensorless for brushless motor.
Compatible with cycle analsyt V2 andV3, throttle, pas sensor, cruise control, backward and forward selection, ebrake cut off, regen...
€25.00
(tax incl.)
Main wiring harness (Eb-bus) for 15A and 22A OZO controller working with Bafang protocol.
€25.00
(tax incl.)
Cable harness to connect your display to your OZO wheel motor.
€189.00
(tax incl.)
Kelly KLS7210ND KLS7215ND 7220ND and 7230ND Mini Controller
Operating voltage range: 39V to 84V
150A rated et 300A max for the KLS7230ND
100A rated et 200A max for the KLS7220ND
80A rated and 150A max for the...
€25.00
(tax incl.)
This "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built...
€199.00
(tax incl.)
The OZO controller 24V 36V 48V 60A integrates high quality electronic components from the automotive world. For electric motors above 1500W and up to 5000W
Dual sensored / sensorless adaptive field-oriented...
€25.00
(tax incl.)
speed control device for electric bicycle.
On the same principle as your car’s cruise control: you select a cruising speed, you release the accelerator and the electronics regulate the engine power to maintain a...
€199.00
(tax incl.)
Bluetooth 100A, 190A and 350A FOC vector controller for brushless motors.
Compatible with 48V, 60V and 72V batteries.
This controller is the perfect choice for electrifying motorcycles, karts, boats or any other...
€25.00
(tax incl.)
This half handle accelerator is compatible with all our kits.
The two-position switch can be used to turn off the engine if it is wired to the "brake off" input of the controller or to power your lighting.
€8.00
(tax incl.)
This extension cable has a 3-way JST connector for pedal sensor or accelerator. With switch 3-Position. Available in 3 lengths :
30 cm
50 cm
100 cm
€349.00
(tax incl.)
Bluetooth 100A, 190A 350A, 450A and 500A FOC vector controller for brushless motors.
Compatible with 48V, 60V and 72V batteries.
This controller is the perfect choice for electrifying motorcycles, karts, boats or...
€149.00
(tax incl.)
Easily add a motor cut-off to your e-bike equipped with hydraulic brakes!
This high-performance 4-piston hydraulic brake delivers powerful and progressive braking, and features an integrated motor cut-off sensor...
€29.00
(tax incl.)
his accelerator for electric bicycles is activated with the thumb.
Cable length: 1m
This model is versatile, meaning you can install it on the right or left side of your handlebar.
This set includes a waterproof...
€12.90
(tax incl.)
This case will allow you to aesthetically fix your 15A 250W controller on the frame of your bike.
The box is installed on the vertical frame tube using two clamps.
Your frame tube should have a maximum diameter of...
€29.00
(tax incl.)
his accelerator for electric bicycles is activated with the thumb.
Cable length: 1m
This model is versatile, meaning you can install it on the right or left side of your handlebar.
This set includes a waterproof...
€10.00
(tax incl.)
This red pushing button is expected to be installed on a handlebar or a 22mm tube.
On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the...
€30.00
(tax incl.)
Thumb throttle with Battery indicator and ON/OOF switch for Ebikes.
You can install it on the right or Left side of your handlebar.
Available in two Voltage: 36V gauge or 48V.
€20.00
(tax incl.)
The Z Frame Pack is a frame bag which is mounted on the horizontal tube at the rear. It is ideal for carrying tools, a mini pump, energy bars, a phone, a rain gear ...
Dimensions: 270 x 100 x 80mm / 10.6 x 3.9 x...
€130.00
(tax incl.)
The OZO 22A Controller, equipped with Field-Oriented Control (FOC) technology, ensures optimal performance for OZO Brushless motors. Its IP6-rated tropicalization and waterproof connectors provide exceptional...
€35.00
(tax incl.)
Give your electric vehicle precise and responsive control with this motorcycle-style throttle, specially designed for electric bikes, scooters, e-motorcycles, and e-scooters.
Thanks to its ergonomic design and robust...
€30.00
(tax incl.)
Electric motorcycle throttle handle with 1m cable and 3x pins female Julet Z309AM waterproof connector.
Compatible with all OZO controllers.
€79.00
(tax incl.)
OZO offers 3x different display models. The display is the screen on the ebikes handlebar. It shows all electrical and run datas such as battery state of charge, speed, distance and allows to select the assist power...
€99.00
(tax incl.)
Easily add a motor cut-off to your electric bike equipped with hydraulic brakes!This hydraulic brake provides powerful, progressive braking and integrates an electric cut-off compatible with JULET 2-PIN male red...
€15.00
(tax incl.)
JST magnetic contact to activate the brake cut-off on a bike equipped with hydraulic brakes.
4-way JST connector for compatibility with OZO controllers.
You keep your original hydraulic brakes.
Cable length = 700mm
€19.00
(tax incl.)
This handset including two switches (2x positions switches) can be used to start the system or switch on the lighting or in order to select between the forward/backward motion.
Suitable with every 22mm diameter...
€25.00
(tax incl.)
Half throttle for ebikes.
Delivered with JST 3 pins male connector.
Easy to install with "lock-on" collar
€199.00
(tax incl.)
The V3 Cycle Analyst is the next step for the CA product line to not only monitor what is going on in an ebike, but also control it. In the V2 CA we included basic throttle over-ride capabilities for speed, current,...
The controller (also called variator) is the brain of your electric bike motorization kit. It is an electronic case that manages the motor. The controller receives an information (control signal) from the pedelec or from the full twist throttle and manages the motor power according to this information.
All of our controllers initially include: Anderson Powerpole connectors for power, JST connectors for control, the possibility to connect a throttle or a pedelec, a cut off brake and a cycle analyst.
Our controllers for electric bikes can work with several voltages. This means that you can supply the controllers with various voltages 24V, 36V, 48V and even 72V for some models. To understand better the various controllers’ technologies, please have a look at our “technical information”page.
