0

Composant ki

Engine kit Crankset Bafang BBS02 B 500W Engine kit Crankset Bafang BBS02 B 500W
Limited special offer

Bafang 36V BBS02 500W mid drive motor without battery

€680.00 (tax incl.) €772.40
120N.m of torque for this 36V 500W middle drive system for general use. It's appreciated by riders over 85Kg. The Bafang BBS02 36V M315 central Motor Kit is offered here in medium transmission for road and VTC.
10 kw Electric retrofit motor watercooling

6kW to 9kW liquid-cooled brushless mid-drive electric motor

€999.00 (tax incl.)
Special retrofit for boats, motorcycles, go-karts, ATVs, or sailboats, this IPM brushless electric motor with a central rotor is designed to deliver a power output of 6kW to 10kW depending on the supply voltage of...
TORQUE ARM Base 3

TORQUE ARM Base 3

€12.00 (tax incl.)
In 6.20 mm thick stainless steel To check the installation of the torque arm on your bike, you can print the plan below, cut out the part and position it on the frame. Plan "Base 3 M12"
Support potence pour CA Support potence pour CA

Support bracket for CA

€16.00 (tax incl.)
The CA (Cycle Analyst) bracket is the ideal accessory to install your on-board computer directly in the center of your cockpit. By attaching the Cycle Analyst to the stem, you free up space on your handlebars while...
Capteur pédalier intégré pour contrôleur 15A et 22A Capteur pédalier intégré pour contrôleur 15A et 22A

JST pedal box sensor for OZO controller

€20.00 (tax incl.)
Pedal sensor in housing for OZO controller 25A and 35A. For cases with external bearings such as Shimano hollowtech, choose the "transmission side". Very simple installation. 3-way JST male connector. Installation...
Demi poignée 2017 avec jauge batterie Demi poignée 2017 avec jauge batterie

Half handle with battery gauge 36V or 48V

€35.00 (tax incl.)
Half handle lock on type with battery gauge 36V or 48V. The LEDs give you an idea of the remaining energy in the battery: 20%, 50%, 100%. It incorporates a two-position switch
coupure frein câble connecteur jst coupure frein câble connecteur jst

Cable brake cut-off for controller 15A-22A OZO

€20.00 (tax incl.)
This 33cm brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper....
BBS02 48V 750W - 1200W mid-drive motor BBS02 48V 750W - 1200W mid-drive motor
Limited special offer

Motor Kit Pedal 750W City-VTC-Road BBS02 without battery

€730.00 (tax incl.) €822.40
160N.m of torque for this 750W central motor which will be ideal for riders over 100Kg to do everything that you can imagine on your electric bike regardless of terrain and elevation.
KELLY battery cable with 150A Anderson connector

KELLY battery cable with 150A Anderson connector

€36.00 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m,  Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
Adaptateur éclairage Anderson vers 2 JULET Mâle Z209AG Adaptateur éclairage Anderson vers 2 JULET Mâle Z209AG

ANDERSON to JULET Z209AG adapter

€25.00 (tax incl.)
ANDERSON to JULET Z209AG adapter. Allows to install ebikes lights by connecting in series between batetry and controller
10 kw Electric retrofit motor watercooling 10 kw Electric retrofit motor watercooling

Central electric motor 10kW brushless liquid cooling

€1,290.00 (tax incl.)
Special retrofit for boats, motorcycles, go-karts, ATVs, or sailboats, this IPM brushless electric motor with a central rotor is designed to deliver a power output of 6kW to 10kW depending on the supply voltage of...
Jante MACH1 610 Jante MACH1 610

MACH1 ROAD RUNNER Rim

€29.90 (tax incl.)
The MACH1 ROAD RUNNER rim is a semi-profiled rim with eyelets, ideal for thin tyres and compatible with wide tyres for more comfort. In 700.
Base 1 Base 1
Limited special offer

Pack Torque arm to screw M5 / M6

€19.00 (tax incl.) €21.50
The Torque Arm allows to limit the stress on the bike frame, at the level of the wheel fixing beaks, to avoid any deformation. It is highly recommended for kits over 400W.
Moteur Moteur

Agriculture electric wheel 500W universal brushless motor

€449.00 (tax incl.)
This 500W-1000W electric brushless universal motor offers the ability to choose different wheel diameters and tire widths with its removable aluminum machine casted rim flanges. The ability to remove the rims makes...
Cable de programmation

Programming cable for cycle analyst

€20.00 (tax incl.)
This cable allows to update your cycle analyst with the last software version and also to read and set all datas on your computer.
Poignée de frein à contact pour Bafang BBS01 BBS02 BBSHD Poignée de frein à contact pour Bafang BBS01 BBS02 BBSHD

Bafang brake ebrakes

€20.00 (tax incl.)
Bafang ebrake for BBS01 BBS02 BBSHD Maxdrive Can also be plugged on any ebikes with Julet waterproof connector 3 pins.
Base hexagonale

hexagonal base

€21.00 (tax incl.)
This hexagonal base offers angular freedom that allows it to adapt to all frame geometries. To check the installation of the torque arm on your bike, you can print the plan below, cut out the part and position it on...
Wheelbarrow motor 250W

Wheelbarrow motor 250W

€349.00 (tax incl.)
Wheelbarrow motor with a ratio of 1:40. Allows towing up to 120Kg under 24V DC. You will be able to install a standard wheelbarrow 4.80 / 4.00 - 8 inches tire Weight: 4.7 kg | Diameter: 23 cm | Center distance: 16 cm....
Moteur 500W 1000W brushless central inner rotor Moteur 500W 1000W brushless central inner rotor

Moteur 500W 1000W brushless central inner rotor

€199.00 (tax incl.)
Central brushless BLDC motor that can deliver 500W under 24V, 750W under 36V and 1000W unde 48V. Can drive any rotating tools or small kids electric  motorcycle or scooter. Max speed is 3500 Tr/min under 48V Max...
KELLY motor cable with XT150 connector

KELLY motor cable with XT150 connector

€35.00 (tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
Intérupteur 3 positions 3 position switch for OZO controller

3 position switch for OZO controller

€15.00 (tax incl.)
Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...

OZO offers a wide range of components for electric bicycles for the optimization or repair of electric bicycles with wheel motor or pedal motor.

Read moreShow less
Close
Click for more products.
No products were found.

Settings

Click for more products.
No products were found.

Menu

Please sign in first.

Sign in