Composant ki

Mounting pack for electric kit

€10.00 (tax incl.)

For any purchase of an electric kit OZO (radiated motor + controller + accelerator or pedal crank) a mounting pack is offered to facilitate the installation of your electric kit and make it reliable.

2-position toggle switch

€10.00 (tax incl.)

Multifunction switch with two positions. It can be used as an ON/OFF switch for your lighting or for your OZO controller. Supplied with 2-pin JST connector.

double accessories adapter Ø25 - 31.8mm

€8.90 (tax incl.)

Ce support d'accessoire double peut etre installer facilement sur tous les guidons de diamètre 25 mm à 31.8 mm. Il vous permettra notamment d'installer votre display ainsi que la gachette d'accélérateur au pouce....

M5 or M6 Screw

€2.00 (tax incl.)

M6 x 15mm M5 x 15mm

Nut for 13G stainless steel shelves

€0.10 (tax incl.)

adapter pedal board sensor under frame

€10.00 (tax incl.)

This bracket allows the installation of the bottom bracket sensor on the frame under the crankset, when it is not possible to install the bottom bracket sensor on the vertical frame tube. The pedal sensor’s probe is...

Capteur pédalier intégré pour contrôleur 15A et 22A

12x magnets ring for pedelec sensor

€9.90 (tax incl.)

12x magnets ring for pedelec sensor. Brand : Kingmeter Drive side and opposite side available. For easier installation you can use our support available here

Sonde de vitesse

€5.00 (tax incl.)

600W brushless electric motor for kayak

€249.00 (tax incl.)

This 600W brushless electric motor has been specially developed to quickly add electric assistance to a traditional inflatable or rigid kayak. If your kayak comes with an original fin, you can install this electric...

Shunt de display pour kit moteur protocole Bafang

Dsiplay shunt for Bafang electric system

€6.00 (tax incl.)

This shunt allows to use your Bafang system without any display.

Karting electric motor frame

€90.00 (tax incl.)

Karting bracket in steel, available in 6mm and 8mm thickness. Designed for mounting in place of the combustion engine, directly on the flanges. Compatibility : -6mm thickness: 3.5kW and 6kW motors -8mm thickness:...

Olive kit and threaded fitting for Star Union PYD220 hydraulic brake

€3.50 (tax incl.)

Star Union PYD220 olive and threaded fitting kit for hydraulic brake hose. Provides a reliable and leak-proof connection between the hose and the brake lever or caliper.

Stainless steel spokes 13G for ebikes or cargo bikes

€0.70 (tax incl.)

Stainless steel spokes 13G (2,3mm diameter) Made in France Conventional rolled 18/8 stainless steel spoke with constant wire diameter from the head to the thread.

Pedal sensor for generic OZO controller

€19.00 (tax incl.)

Pedal sensor compatible with the generic 250W controller for the repair of electric bikes. 2 models available: Integrated 12 magnets or V7 6 magnets The V7 comes with a 6-magnet magnetic washer. Cable length of 60...

Magnet for speed sensor

€4.50 (tax incl.)

Clamp

€2.00 (tax incl.)

Rallonge pour accélérateur pour moteur pédalier

3 pins Julet Bafang cable extender

€9.00 (tax incl.)

Extension brake break or Julet 2-way lighting

€9.00 (tax incl.)

Extension for brake handle with cut-off point with sealed Julet 2-way connector for 15A and 22A controller Julet red 2-way connector compatible with many commercial electric bikes: Cycoo V-5500, TopLife V-5500,...

Adaptateur 5 trous côté transmission pour boitier compact

pedelec magnet ring holder adapter

€10.00 (tax incl.)

These adapters allow to install the pagnet ring of your pedelec sensor on any bottom bracket standard.

5000W motorcycle bike rear wheel motor

€399.00 (tax incl.)

This 5000W motor gets 55mmm magnets and can accepts up to 5000W power and 1000Km/h speed. Weight : 10, kg | dropout : 150mm Pmax = 5000W / Pnom = 4000W Max torque = 145N.m Kv 10 Tr/min/Volt

Accelerator stand straight or elbow shaped

€9.90 (tax incl.)

Accelerator stand straight or elbow shaped for wheelbarrow, cart, agricultural and industrial machinery

PP30 battery cable for kelly controller

€20.00 (tax incl.)

Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m, 1.5m Cable section: 13AWG / 2,5mm2 + after wired contact to...

Green pushing switch

€10.00 (tax incl.)

This green pushing button switch is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or...

2-way Extension cable for 25A & 35A controller 20cm,50cm,100cm,140cm

2-way JST temperature or lighting probe extension for 25A and 35A controllers, 20cm, 50cm, 100cm and 140cm

€5.00 (tax incl.)

2-way extension cable for temperature and ON/OFF switch's controller of 25A & 35A. Available in 4 lengths 20cm 50cm 100cm 140cm

Stainless stell motor bracket

€160.00 (tax incl.)

Karting bracket in 316L stainless steel, available in 6mm and 8mm thickness. Designed for mounting in place of the combustion engine, directly on the flanges. Compatibility : -6mm thickness: 3.5kW and 6kW motors...

V5 pedal sensor

€19.00 (tax incl.)

The pedal sensor is a rotation sensor. You are required to pedal for assistance and you cannot precisely dose the desired level of assistance since this level is determined by a law of assistance specific to the...

Lithium battery leds capacity gauge 24V 36V 48V

€8.00 (tax incl.)

Capacity Leds gauge for Lithium batteries. Select the appropriate voltage : 24V, 36V and 48V. 5x leds ON when battery is full of charge.

Black stainless steel spoke 13G 2,3mm

€1.45 (tax incl.)

Black stainless steel spoke 13G Made in France

Screws for torque arm collar

€3.00 (tax incl.)

ATV type thumb trigger accelerator for ebike

€20.00 (tax incl.)

This ebike accelerator is thumb operated. An exact copy of the accelerators found on quads or water scooters. Note that you can only install this accelerator if you have previously removed a derailleur lever....

Spacer support speed sensor for fat bikes

€9.90 (tax incl.)

This spacer allows the speed sensor to be offset if it is too far from the magnet. Essential on fat bikes.

Brake JST extension cable

€10.00 (tax incl.)

This brake extension cable has a JST connector available in : - 30cm - 50cm

Interrupteur 2 positions rond rouge ON-OFF pour vélo

€10.00 (tax incl.)

Multifunction interruptor with 2 positions It can be used as a switch for your lighting or your OZO controller Delivered with 2 JST ways connector

Electric retrofit motor for motocycle or karting

€249.00 (tax incl.)

This central rotor Brushless PMSM electric motor is designed to deliver a power of 1000W at 72V, generating a torque of 12 Nm. This is equivalent to a thermal power of 2CV. It will be perfect for retrofitting a...

TORQUE ARM Mixed leg

€7.00 (tax incl.)

In 2.70mm thick stainless steel

13G stainless steel spokes custom length

€1.45 (tax incl.)

We can cut spokes at your convenience. Conventional rolled 18/8 stainless steel spoke with constant wire diameter from the head to the thread. 13G spokes (2,3mm diameter)