0

Composant ki

Rayons longueurs standards Rayons longueurs standards

13G stainless steel spokes custom length

€1.45 (tax incl.)
We can cut spokes at your convenience. Conventional rolled 18/8 stainless steel spoke with constant wire diameter from the head to the thread. 13G spokes (2,3mm diameter)
Accélérateur gachette au pouce Accélérateur gachette au pouce

ATV type thumb trigger accelerator for ebike

€20.00 (tax incl.)
This ebike accelerator is thumb operated. An exact copy of the accelerators found on quads or water scooters. Note that you can only install this accelerator if you have previously removed a derailleur lever. Supplied...
Support capteur pédalier sous boitier Support capteur pédalier sous boitier

adapter pedal board sensor under frame

€10.00 (tax incl.)
This bracket allows the installation of the bottom bracket sensor on the frame under the crankset, when it is not possible to install the bottom bracket sensor on the vertical frame tube. The pedal sensor’s probe is...
Frein à contact Frein à contact

Contact brake MT5e

€144.90 (tax incl.)
Can fit on OZO kits with 15A and 22A controller. Original length of the hose 2m20Hydraulic system.
LED stick gauge for Lithium battery

LED gauge for Lithium battery 12V to 72V

€9.90 (tax incl.)
Battery leds gauge for lithium batteries from 12V to 72V.  This gauge can be easily glued to any battery. This gauge is completely waterproof.
Moteur central 3500W Moteur central 3500W

3500W BLDC brushless central motor

€399.00 (tax incl.)
3500W BLDC brushless central motor Max speed is 3000 RPM under 48V, 3750 RPM under 60V and 4500 RPM under 72V. Maw torque is 50N.m Ideal to convert 50cc or 80cc into electric.
cable Y JST 3 voies pour accélérateur cable Y JST 3 voies pour accélérateur

Y splitter cable 3 pins JST for throttle

€24.90 (tax incl.)
Y splitter cable to connect one throttle on both controllers. Allows to drive simultanouesly two motors with one throttle. 3 pins JST connectors compatible with OZO controllers 25A, 35A, 40A, 60A and Kelly controllers...
Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo

Black brake push button for bike.

€12.00 (tax incl.)
This push button is designed for installation on a 22mm handlebar or tube. On a bicycle or motorcycle, it can be used to ground the engine, deactivate the cruise control, or activate the horn. On a cart, it can be...
Capteur pédalier V5 Capteur pédalier V5

Pedal sensor for generic OZO controller

€19.00 (tax incl.)
Pedal sensor compatible with the generic 250W controller for the repair of electric bikes. 2 models available: Integrated 12 magnets or V7 6 magnets The V7 comes with a 6-magnet magnetic washer. Cable length of 60 cm...
Accélérateur gachette au pouce Accélérateur gachette au pouce

Half handle accelerator with push button

€25.00 (tax incl.)
This "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built...
KELLY battery cable with 50A Anderson connector

KELLY battery cable with 50A Anderson connector

€33.60 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
Ralonge moteur avec phase et capteur HALL Ralonge moteur avec phase et capteur HALL

Motor cable extender 45cm and 1m anderson PP30 / JST

€20.00 (tax incl.)
Motor cable extender 45cm and 1m Extension for motor cable with 3x 2.00mm2 cables for the phases and 5x 0.22mm2 cables for the HALL sensors. The extensions are supplied with Anderson PP30 connectors for the phases...
Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo

2-position black switch

€12.00 (tax incl.)
Multifunction two-position switch. It can be used as a forward/reverse switch, ON/OFF for your lighting, or for your OZO controller. Supplied with a 2-way JST connector.
Capteur pédalier V5 Capteur pédalier V5

V5 pedal sensor

€19.00 (tax incl.)
The pedal sensor is a rotation sensor. You are required to pedal for assistance and you cannot precisely dose the desired level of assistance since this level is determined by a law of assistance specific to the...
Demi-poignée d'accélérateur avec bouton On Off Demi-poignée d'accélérateur avec bouton On Off

Half handle accelerator with 2 position button

€25.00 (tax incl.)
This half handle accelerator is compatible with all our kits. The two-position switch can be used to turn off the engine if it is wired to the "brake off" input of the controller or to power your lighting.
Base 1

Base 1

€10.00 (tax incl.)
To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame. "Base 1 M12" plan "Base 1 M14" plan
Controller Kelly motor cable Controller Kelly motor cable

Controller Kelly motor cable

€36.00 (tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
BBSHD 42T chainring BBSHD 42T chainring
Limited special offer

Bafang 1000W BBSHD 48V mid drive motor kit without battery

€939.00 (tax incl.) €1,021.40
The Beast ! More than 200N.m of torque. This 1000W middle drive motor BBSHD here in M615 version is a war machine, a Tank ! 6Kg butallows you to climb the trees. It will be perfect for heavy riders over 110Kg, extrem...
Interrupteur ON-OFF Interrupteur ON-OFF

Double positions siwtches handset

€14.00 (tax incl.)
Double positions siwtches handset for handlebar installation or 22mm tube. Delivered with a 2 ways JST connector and a 1100mm cable length
TORQUE ARM Base 4

TORQUE ARM Base 4

€12.00 (tax incl.)
In 6.20 mm thick stainless steel To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame. Plan "Base 4 M12" Plan "Base 4 M14"
Sonde de vitesse

Speed sensor for cycle analyst

€16.00 (tax incl.)
The speed sensor for Cycle Analyst is the ideal accessory to accurately measure your actual speed and distance traveled on your electric bike. Connected directly to your on-board computer, this sensor works with a...

OZO offers a wide range of components for electric bicycles for the optimization or repair of electric bicycles with wheel motor or pedal motor.

Read moreShow less
Close
Click for more products.
No products were found.

Settings

Click for more products.
No products were found.

Menu

Please sign in first.

Sign in