0

Controllers

Touring 250W rear wheel kit with 36V PVC battery Touring 250W rear wheel kit with 36V PVC battery

Touring 250W rear wheel kit with 36V PVC battery

€269.00 (tax incl.)
OZO 500W External Controller Kit - Repair and Upgrade for Electric Bikes The OZO 500W Controller Kit is the ideal solution for repairing or upgrading your electric bike. This complete kit includes a controller, a...
coupure frein câble connecteur jst coupure frein câble connecteur jst

Cable brake cut-off for controller 25A and 35A OZO

€15.00 (tax incl.)
This brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper....
Touring 250W rear wheel kit with 36V PVC battery Touring 250W rear wheel kit with 36V PVC battery

Touring 250W rear wheel kit with 36V PVC battery

€322.00 (tax incl.)
35A Conversion Kit for Direct Drive Motors (Motor and Battery not included) Upgrade your direct drive motor with a modern controller, a large color display, and a pedal assist sensor ✅ Kit Contents (excluding motor...
Interrupteur ON-OFF Interrupteur ON-OFF

Selecteur de mode (2 boutons poussoir)

€19.00 (tax incl.)
Double combined for handlebar installation or 22mm tube. Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any...
Capteur pédalier intégré pour contrôleur 15A et 22A Capteur pédalier intégré pour contrôleur 15A et 22A

Integrated PAS sensor for OZO controller 15A and 22A

€20.00 (tax incl.)
Built-in integrated pedal sensor for square axle bottom brackets that have a minimum clearance of 4mm between crank and frame. Compatible with OZO Touring and Enduro kits. Very simple installation. Julet three-way...
Capteur pédalier intégré pour contrôleur 15A et 22A Capteur pédalier intégré pour contrôleur 15A et 22A

JST pedal box sensor for OZO controller

€20.00 (tax incl.)
Pedal sensor in housing for OZO controller 25A and 35A. For cases with external bearings such as Shimano hollowtech, choose the "transmission side". Very simple installation. 3-way JST male connector. Installation...
Controleur 15A externe Controleur 15A externe

15A Controller integrated in holder for frame battery

€115.00 (tax incl.)
The OZO 15A Controller, equipped with Field-Oriented Control (FOC) technology, ensures optimal performance for OZO Brushless motors. Its IP6-rated tropicalization and waterproof connectors provide exceptional...
Ralonge moteur avec phase et capteur HALL Ralonge moteur avec phase et capteur HALL

Motor cable extender 45cm and 1m anderson PP30 / JST

€20.00 (tax incl.)
Motor cable extender 45cm and 1m Extension for motor cable with 3x 2.00mm2 cables for the phases and 5x 0.22mm2 cables for the HALL sensors. The extensions are supplied with Anderson PP30 connectors for the phases...
Accélérateur gachette au pouce Accélérateur gachette au pouce

Half handle accelerator with push button

€25.00 (tax incl.)
This "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built...
Controller 25A 12V 24V 36V 48V dual sensored/sensorless Controller 25A 12V 24V 36V 48V dual sensored/sensorless

60A BLDC FOC industrial Controller 24V 36V 48V

€199.00 (tax incl.)
The OZO controller 24V 36V 48V 60A integrates high quality electronic components from the automotive world. For electric motors above 1500W and up to 5000W Dual sensored / sensorless adaptive field-oriented...
Régulateur de vitesse

Cruise control for electric bike

€25.00 (tax incl.)
speed control device for electric bicycle. On the same principle as your car’s cruise control: you select a cruising speed, you release the accelerator and the electronics regulate the engine power to maintain a...
Demi-poignée d'accélérateur avec bouton On Off Demi-poignée d'accélérateur avec bouton On Off

Half handle accelerator with 2 position button

€25.00 (tax incl.)
This half handle accelerator is compatible with all our kits. The two-position switch can be used to turn off the engine if it is wired to the "brake off" input of the controller or to power your lighting.
3-Way JST extension cable 3-Way JST extension cable

3-Way JST extension cable

€8.00 (tax incl.)
This extension cable has a 3-way JST connector for pedal sensor or accelerator. With switch 3-Position. Available in 3 lengths : 30 cm 50 cm 100 cm
COUPURE FREIN A DISQUE HYDRAULIQUE COUPURE FREIN A DISQUE HYDRAULIQUE

COUPURE FREIN A DISQUE HYDRAULIQUE

€149.00 (tax incl.)
Easily add a motor cut-off to your e-bike equipped with hydraulic brakes! This high-performance 4-piston hydraulic brake delivers powerful and progressive braking, and features an integrated motor cut-off sensor...
Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo

Thumb throttle with switch for ebikes

€29.00 (tax incl.)
his accelerator for electric bicycles is activated with the thumb. Cable length: 1m This model is versatile, meaning you can install it on the right or left side of your handlebar. This set includes a waterproof...
Boite ABS pour fixer les controleurs 17A sur le cadre Boite ABS pour fixer les controleurs 17A sur le cadre

15A 250W controller box frame mount

€12.90 (tax incl.)
This case will allow you to aesthetically fix your 15A 250W controller on the frame of your bike. The box is installed on the vertical frame tube using two clamps. Your frame tube should have a maximum diameter of...
Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo

Thumb throttle with switch for ebikes

€29.00 (tax incl.)
his accelerator for electric bicycles is activated with the thumb. Cable length: 1m This model is versatile, meaning you can install it on the right or left side of your handlebar. This set includes a waterproof...
Bouton poussoir rond vert Bouton poussoir rond vert

Bouton poussoir rond rouge

€10.00 (tax incl.)
This red pushing button is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the...
ZEFAL Z Frame Pack frame bag ZEFAL Z Frame Pack frame bag

ZEFAL Z Frame bag for OZO controller and battery 100Wh

€20.00 (tax incl.)
The Z Frame Pack is a frame bag which is mounted on the horizontal tube at the rear. It is ideal for carrying tools, a mini pump, energy bars, a phone, a rain gear ... Dimensions: 270 x 100 x 80mm / 10.6 x 3.9 x...
Controleur 15A externe Controleur 15A externe

22A Controller integrated in holder for frame battery

€130.00 (tax incl.)
The OZO 22A Controller, equipped with Field-Oriented Control (FOC) technology, ensures optimal performance for OZO Brushless motors. Its IP6-rated tropicalization and waterproof connectors provide exceptional...
Poignée accélérateur bouton poussoir Poignée accélérateur bouton poussoir

Push-button throttle

€35.00 (tax incl.)
Give your electric vehicle precise and responsive control with this motorcycle-style throttle, specially designed for electric bikes, scooters, e-motorcycles, and e-scooters. Thanks to its ergonomic design and robust...
Qu'est ce qu'un Torque ARMS ? Qu'est ce qu'un Torque ARMS ?

Displays selection for wheel motor 250W to 750W

€79.00 (tax incl.)
OZO offers 3x different display models. The display is the screen on the ebikes handlebar. It shows all electrical and run datas such as battery state of charge, speed, distance and allows to select the assist power...
COUPURE FREIN A DISQUE HYDRAULIQUE COUPURE FREIN A DISQUE HYDRAULIQUE

COUPURE FREIN A DISQUE HYDRAULIQUE

€99.00 (tax incl.)
Easily add a motor cut-off to your electric bike equipped with hydraulic brakes!This hydraulic brake provides powerful, progressive braking and integrates an electric cut-off compatible with JULET 2-PIN male red...
Contacte magnétique pour frein hydraulique Contacte magnétique pour frein hydraulique

Hydraulic brake controller cut-off 25A and 35A OZO

€15.00 (tax incl.)
JST magnetic contact to activate the brake cut-off on a bike equipped with hydraulic brakes. 4-way JST connector for compatibility with OZO controllers. You keep your original hydraulic brakes. Cable length = 700mm
Interrupteur ON-OFF Interrupteur ON-OFF

Double two positions switches handset

€19.00 (tax incl.)
This handset including two switches (2x positions switches) can be used to start the system or switch on the lighting or in order to select between the forward/backward motion. Suitable with every 22mm diameter...
Cycle analyst V3 Cycle analyst V3

Cycle analyst V3 DPS

€199.00 (tax incl.)
The V3 Cycle Analyst is the next step for the CA product line to not only monitor what is going on in an ebike, but also control it. In the V2 CA we included basic throttle over-ride capabilities for speed, current,...

The controller (also called variator) is the brain of your electric bike motorization kit. It is an electronic case that manages the motor. The controller receives an information (control signal) from the pedelec or from the full twist throttle and manages the motor power according to this information.

All of our controllers initially include: Anderson Powerpole connectors for power, JST connectors for control, the possibility to connect a throttle or a pedelec, a cut off brake and a cycle analyst.

Our controllers for electric bikes can work with several voltages. This means that you can supply the controllers with various voltages 24V, 36V, 48V and even 72V for some models. To understand better the various controllers’ technologies, please have a look at our “technical information”page.

Read moreShow less
Close
Click for more products.
No products were found.

Settings

Click for more products.
No products were found.

Menu

Please sign in first.

Sign in