€10.00
(tax incl.)
6-way extension cable cycle analyst
30cm
50cm
100cm
Filters
Composant ki
€9.90
(tax incl.)
Battery leds gauge for lithium batteries from 12V to 72V.
This gauge can be easily glued to any battery.
This gauge is completely waterproof.
€399.00
(tax incl.)
This Brushless PMSM Electric Motor (Permanent Magnet Inner Rotor Motor) with Hall effect sensors is designed to deliver a power of 1500W at 48V, generating a torque of 25 N.m and a maximum rotational speed of 4800...
€20.00
(tax incl.)
This electric bike thumb throttle is compatible with all Bafang mid-drive motor kits and OZO electric wheel kits in 250W, 500W, and 750W configurations.
It can be installed on either the right or left side of your...
€7.00
(tax incl.)
To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame.
2D plan of the M5 leg
2D plan of the M6 leg
€20.00
(tax incl.)
Pedal sensor for 15A and 22A OZO controllers to be installed on the vertical frame tube
Supplied with the 12-magnet half discs and the probe.
3-way Julet waterproof connector.
Cable length: 120 mm.
End to end...
€15.00
(tax incl.)
This brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles
It is quick to install on the brake handle or caliper....
€10.00
(tax incl.)
Eb-bus extender for main harness on your OZO conversion kit.
exists in 3x lengths : 30cm, 80cm, 1m
€12.50
(tax incl.)
With 5-way JST box with 4 cables.Available in 50cm and 1m.
€399.00
(tax incl.)
3500W BLDC brushless central motor
Max speed is 3000 RPM under 48V, 3750 RPM under 60V and 4500 RPM under 72V.
Maw torque is 50N.m
Ideal to convert 50cc or 80cc into electric.
€24.90
(tax incl.)
Y splitter cable to connect one throttle on both controllers. Allows to drive simultanouesly two motors with one throttle.
3 pins JST connectors compatible with OZO controllers 25A, 35A, 40A, 60A and Kelly controllers...
€12.00
(tax incl.)
This push button is designed for installation on a 22mm handlebar or tube.
On a bicycle or motorcycle, it can be used to ground the engine, deactivate the cruise control, or activate the horn. On a cart, it can be...
€25.00
(tax incl.)
This "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built...
€20.00
(tax incl.)
Pedal sensor in housing for OZO controller 25A and 35A.
For cases with external bearings such as Shimano hollowtech, choose the "transmission side".
Very simple installation.
3-way JST male connector.
Installation...
€20.00
(tax incl.)
Contact brake handle compatible with the 22A OZO controller
You can buy a right handle or a left or the pair.
Two colors available: Gray or black.
OZO offers a wide range of components for electric bicycles for the optimization or repair of electric bicycles with wheel motor or pedal motor.
