Filters
Composant ki
€690.00
(tax incl.)
Brushless BLDC 6kW motor to convert any bike 125cc or 250cc into electric. Can also powered electric boat or karting
9,1kg
€33.60
(tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers.
Standard length: 35cm / Optional extension possible: 50cm, 1m
Cable section: 10AWG / 5mm2
+ after wired contact to switch on the...
€20.00
(tax incl.)
Motor cable extender 45cm and 1m
Extension for motor cable with 3x 2.00mm2 cables for the phases and 5x 0.22mm2 cables for the HALL sensors.
The extensions are supplied with Anderson PP30 connectors for the phases...
€12.00
(tax incl.)
Multifunction two-position switch.
It can be used as a forward/reverse switch, ON/OFF for your lighting, or for your OZO controller.
Supplied with a 2-way JST connector.
€29.00
(tax incl.)
his accelerator for electric bicycles is activated with the thumb.
Cable length: 1m
This model is versatile, meaning you can install it on the right or left side of your handlebar.
This set includes a waterproof...
€19.00
(tax incl.)
The pedal sensor is a rotation sensor. You are required to pedal for assistance and you cannot precisely dose the desired level of assistance since this level is determined by a law of assistance specific to the...
€15.00
(tax incl.)
Support for potentiometer to screw on the back of the V2 or V3 analyst cycle
€10.00
(tax incl.)
To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame.
"Base 1 M12" plan
"Base 1 M14" plan
Limited special offer
€939.00
(tax incl.)
€1,021.40
The Beast ! More than 200N.m of torque. This 1000W middle drive motor BBSHD here in M615 version is a war machine, a Tank ! 6Kg butallows you to climb the trees. It will be perfect for heavy riders over 110Kg, extrem...
€36.00
(tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers.
Standard length: 35cm / Optional extension possible: 45cm, 1,1m.
Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
€14.00
(tax incl.)
Double positions siwtches handset for handlebar installation or 22mm tube.
Delivered with a 2 ways JST connector and a 1100mm cable length
€699.00
(tax incl.)
This Brushless electric motor PMSM (Permanent Magnet Inner Rotor Motor) with Hall effect sensors is designed to deliver a power of 5000W at 48V, generating a torque of 130 N.m and a maximum rotational speed of 3500...
€20.00
(tax incl.)
Macthing SHIMANO MT200/MT401Adding
Motor power off brake sensor make cycling safer
Easy assembly and no change with the original brakestructure
Braking signal sensitivity is adjustable by user
Waterproof rating:...
€35.00
(tax incl.)
Give your electric vehicle precise and responsive control with this motorcycle-style throttle, specially designed for electric bikes, scooters, e-motorcycles, and e-scooters.
Thanks to its ergonomic design and robust...
€12.00
(tax incl.)
In 6.20 mm thick stainless steel
To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame.
Plan "Base 4 M12"
Plan "Base 4 M14"
€16.00
(tax incl.)
The speed sensor for Cycle Analyst is the ideal accessory to accurately measure your actual speed and distance traveled on your electric bike. Connected directly to your on-board computer, this sensor works with a...
€15.00
(tax incl.)
This brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles
It is quick to install on the brake handle or caliper....
Limited special offer
€680.00
(tax incl.)
€772.40
120N.m of torque for this 36V 500W middle drive system for general use. It's appreciated by riders over 85Kg. The Bafang BBS02 36V M315 central Motor Kit is offered here in medium transmission for road and VTC.
€30.00
(tax incl.)
Electric motorcycle throttle handle with 1m cable and 3x pins female Julet Z309AM waterproof connector.
Compatible with all OZO controllers.
€14.00
(tax incl.)
handset with one pushing button and one ON/OFF switch for handlebar installation or 22mm tube.
Delivered with a 2 ways JST connector and a 1100mm cable length
€999.00
(tax incl.)
Special retrofit for boats, motorcycles, go-karts, ATVs, or sailboats, this IPM brushless electric motor with a central rotor is designed to deliver a power output of 6kW to 10kW depending on the supply voltage of...
€12.00
(tax incl.)
In 6.20 mm thick stainless steel
To check the installation of the torque arm on your bike, you can print the plan below, cut out the part and position it on the frame.
Plan "Base 3 M12"
€16.00
(tax incl.)
The CA (Cycle Analyst) bracket is the ideal accessory to install your on-board computer directly in the center of your cockpit. By attaching the Cycle Analyst to the stem, you free up space on your handlebars while...
€12.00
(tax incl.)
Extension cable Julet for bafang display 5 pins or OZO display
30cm length
€20.00
(tax incl.)
Pedal sensor in housing for OZO controller 25A and 35A.
For cases with external bearings such as Shimano hollowtech, choose the "transmission side".
Very simple installation.
3-way JST male connector.
Installation...
€35.00
(tax incl.)
Half handle lock on type with battery gauge 36V or 48V.
The LEDs give you an idea of the remaining energy in the battery: 20%, 50%, 100%.
It incorporates a two-position switch
€29.90
(tax incl.)
A high rim with 36 double-walled holes reinforced for Gravel bike or electric cylo-cross use, allowing an OZO electric hub motor to be radiated in 36 radii.
€20.00
(tax incl.)
This 33cm brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles
It is quick to install on the brake handle or caliper....
Limited special offer
€730.00
(tax incl.)
€822.40
160N.m of torque for this 750W central motor which will be ideal for riders over 100Kg to do everything that you can imagine on your electric bike regardless of terrain and elevation.
€19.00
(tax incl.)
Programming cable to program your kelly controller on your computer.
You will also need RS232 to USB adapter câble adaptateur RS232-USB.
€36.00
(tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers.
Standard length: 35cm / Optional extension possible: 50cm, 1m,
Cable section: 10AWG / 5mm2
+ after wired contact to switch on the...
€25.00
(tax incl.)
ANDERSON to JULET Z209AG adapter. Allows to install ebikes lights by connecting in series between batetry and controller
€1,290.00
(tax incl.)
Special retrofit for boats, motorcycles, go-karts, ATVs, or sailboats, this IPM brushless electric motor with a central rotor is designed to deliver a power output of 6kW to 10kW depending on the supply voltage of...
€499.00
(tax incl.)
IP68 waterproof power controller for 48V to 72V brushless electric motors equipped with an encoder.
4-quadrant controller with Field-Oriented Control (FOC), fully programmable via smartphone or computer. Free...
€29.90
(tax incl.)
The MACH1 ROAD RUNNER rim is a semi-profiled rim with eyelets, ideal for thin tyres and compatible with wide tyres for more comfort. In 700.
€25.00
(tax incl.)
Half throttle for ebikes.
Delivered with JST 3 pins male connector.
Easy to install with "lock-on" collar
€20.00
(tax incl.)
Contact brake handle compatible with the 22A OZO controller
You can buy a right handle or a left or the pair.
Two colors available: Gray or black.
Limited special offer
€630.00
(tax incl.)
€722.40
Delivering 80Nm of torque, this 36V 250W Bafang BBS01 M215 mid-drive motor is offered for versatile use in town or on country roads. It is perfect for riders under 90kg.
Limited special offer
€19.00
(tax incl.)
€21.50
The Torque Arm allows to limit the stress on the bike frame, at the level of the wheel fixing beaks, to avoid any deformation.
It is highly recommended for kits over 400W.
€14.00
(tax incl.)
Double combined for handlebar installation or 22mm tube.
Equipped with two pushing buttons,one green and one red. This product is perfect for activating the forward or backward motion by pressure on an industrial...
€25.00
(tax incl.)
Cable harness to connect your display to your OZO wheel motor.
€449.00
(tax incl.)
This 500W-1000W electric brushless universal motor offers the ability to choose different wheel diameters and tire widths with its removable aluminum machine casted rim flanges.
The ability to remove the rims makes...
€45.00
(tax incl.)
Bluetooth module for IP67-rated FOC controllers (70A to 450A). It allows you to connect your smartphone to the controller via the app to program motor mapping and read parameters in real time.
This Bluetooth module...
€1,490.00
(tax incl.)
Especially designed for motorcycle, karting, boat, or sailboat
Specially designed for retrofitting boats, motorcycles, karts, quads or sailboats, this IPM brushless electric motor with central rotor is designed to...
€20.00
(tax incl.)
This cable allows to update your cycle analyst with the last software version and also to read and set all datas on your computer.
€20.00
(tax incl.)
Bafang ebrake for BBS01 BBS02 BBSHD Maxdrive
Can also be plugged on any ebikes with Julet waterproof connector 3 pins.
€21.00
(tax incl.)
This hexagonal base offers angular freedom that allows it to adapt to all frame geometries.
To check the installation of the torque arm on your bike, you can print the plan below, cut out the part and position it on...
€349.00
(tax incl.)
Wheelbarrow motor with a ratio of 1:40. Allows towing up to 120Kg under 24V DC.
You will be able to install a standard wheelbarrow 4.80 / 4.00 - 8 inches tire
Weight: 4.7 kg | Diameter: 23 cm | Center distance: 16 cm....
€24.90
(tax incl.)
This USB charger converter allows to charge any smartphone or camera or GPS directly with any 12V 24V 36V 48V 60V battery.
Output is 5V 2A
Input voltage has to be between 10V and 60V
44x21x11mm
Easy to use
€199.00
(tax incl.)
Central brushless BLDC motor that can deliver 500W under 24V, 750W under 36V and 1000W unde 48V. Can drive any rotating tools or small kids electric motorcycle or scooter.
Max speed is 3500 Tr/min under 48V
Max...
€35.00
(tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers.
Standard length: 35cm / Optional extension possible: 45cm, 1,1m.
Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
€15.00
(tax incl.)
Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...
OZO offers a wide range of components for electric bicycles for the optimization or repair of electric bicycles with wheel motor or pedal motor.
