€29.90
(tax incl.)
The MACH1 KARGO rim is a robust rim for bicycles that can withstand heavy loads over thousands of miles.
Filters
Composant ki
€20.00
(tax incl.)
This potentiometer support for cycle analyst V3, allows an installation of the potentiometer closer to the handle and will allow you to clamp the torque, speed or power of your engine without leaving the hands of the...
€20.00
(tax incl.)
Available in 50cm or 100cm.
€35.00
(tax incl.)
Give your electric vehicle precise and responsive control with this motorcycle-style throttle, specially designed for electric bikes, scooters, e-motorcycles, and e-scooters.
Thanks to its ergonomic design and robust...
€29.90
(tax incl.)
Tubeless ready, double wall, 36 holes, available in 16", 20'', 24'', 26'', 27,5'' and 29''. Strong rim made in France
€35.00
(tax incl.)
Half handle lock on type with battery gauge 36V or 48V.
The LEDs give you an idea of the remaining energy in the battery: 20%, 50%, 100%.
It incorporates a two-position switch
€19.00
(tax incl.)
The 2 positions selector coudl be used to start the system or switch on the lighting or in order to select between the forward/backward motion.
The red pushing bouton could be used to activate the brake regeneration...
€24.90
(tax incl.)
Capacity indicator for Lead-acid, Li-ION or LiFePO4 battery. Input voltages from 10 to 100V. Displays the remaining battery percentage, temperature and voltage.
€29.00
(tax incl.)
This Wattmeter is the ideal tool for all those who wish to have a reliable autonomy and power gauge.
It will allow you to have an accurate reading of the battery voltage, the power consumed and the energy consumed....
€29.90
(tax incl.)
The MACH1 260 rim is a robust French-made rim for bicycles supporting heavy loads over thousands of kilometers.
Available in 20 '', 24 '', 26 '', 27.5 '' and 28 ''
36 holes, double wall surfaced compatible with pad...
€299.00
(tax incl.)
10" 110mm brushless electric wheel motor suitable for electric conversion of wheelchairs, hospital beds or any rolling machine used in the medical or industry environment to reduce hardness :
Leisure (Golf cart,...
€19.00
(tax incl.)
Double combined for handlebar installation or 22mm tube.
Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any...
€41.00
(tax incl.)
Specific connection kit for connecting your Kelly controller to a computer in order to access the brand’s configuration software.
€14.99
(tax incl.)
This bracket allows to fix the controller under the frame and to let the cables of the derailleur and the brake pass easily.
€30.00
(tax incl.)
Universal shunt 1mOhm for V2 and V3 analyst cycles. You can use the analyst cycle on any controller, solar panel, or charger. Supports a direct current of 50A and a max current of 100A
€20.00
(tax incl.)
Did you lose the key to your electric bike battery? Replace your lock with this original model.
Barrel identical for SilverFish SSE-014 models or other aluminum housings as on the brands: Hilltecks, Gitane, Moma...
€40.00
(tax incl.)
12V 15A controller to power a brushless motor operating in 12V.
Sensorless only.
Ideal for powering scooter motors in 5" or 6"
The controller has the safety function "pedal first", that is to say that it is...
€25.00
(tax incl.)
This adapter allows to wire headlight or battery gauge in parallel of the battery power line
€15.00
(tax incl.)
Julet Z509 5 pins green female to female adapter for display
€169.00
(tax incl.)
The OZO 35A controller is specially designed for our speedster RH212 rear hub direct drive motor with waterproof connector Julet 1121AG.
Can also fit front hub motor FH212
Only compatible with OZO vertical display...
€149.00
(tax incl.)
Easily add a motor cut-off to your e-bike equipped with hydraulic brakes!
This high-performance 4-piston hydraulic brake delivers powerful and progressive braking, and features an integrated motor cut-off sensor...
€15.00
(tax incl.)
The JST contact brake lever includes an essential motor cut-off system to ensure your safety on the electric bike. As soon as you apply the brake, it sends an instant signal to the controller to immediately stop the...
€15.00
(tax incl.)
Cable extension for electric bicycle hub motor with waterproof connector 9 Pins Julet Z910AT
Available in three lengths:
- 30cm
- 45cm
- 110cm
€45.00
(tax incl.)
16A Hall Effect Current Sensor for Solar CA V3 Firmware. This shunt is great for solar application such as long travel, suntrip... you will be able to check your production and consumption on the same CA V3 screen.
€25.00
(tax incl.)
Cable harness Ebbus to connect your display to your OZO wheel motor with Bafang UART Protocol.
€39.00
(tax incl.)
TK15H is a high precision current type battery capacity tester (also known as coulometer), which can test battery voltage, current and capacity to help users know the battery condition in time. TK15H have memory...
€39.00
(tax incl.)
Pas sensor for Cycle analyst V3 CA V3. Can be installed on left side or right side of your bike.
€15.00
(tax incl.)
JST magnetic contact to activate the brake cut-off on a bike equipped with hydraulic brakes.
4-way JST connector for compatibility with OZO controllers.
You keep your original hydraulic brakes.
Cable length = 700mm
€40.00
(tax incl.)
Electric Foot Throttle Electric Scooter Foot Gas Pedals
Voltage : 0-5V
Lenght : 1.2m
Connector : JST 3 pins
€50.00
(tax incl.)
Current measuring device allowing to connect and monitor simultaneously two controllers or energy sources on a single Cycle Analyst screen. It is the ideal accessory to accurately monitor the consumption of a...
Limited special offer
€25.00
(tax incl.)
€28.50
The base 3 is in stainless steel of 6.20mm thickness.
To check the installation of the torque arm on your bike, you can print the plan below, cut the part and position it on the frame.
Plan "Base 3 M12"
€0.50
(tax incl.)
Motor shaft spacers are available for any kind of ebikes motor hub and allows to center the wheel inside the frame.
€45.00
(tax incl.)
Mini scooter or kick scooter controller 36V 250W. Pedal first function, lcd display, active regenerative braking with throttle
€144.90
(tax incl.)
Can fit on OZO kits with 15A and 22A controller.
Original length of the hose 2m20Hydraulic system.
€39.90
(tax incl.)
The trucky 30 is the little sister of the Trucky 40 and accepts tires up to 2.80.
Solid rim with an internal width of 30C. This Easy Tubeless Ready rim has a reinforced double wall and 36 holes so that it can be...
€10.00
(tax incl.)
This red pushing button is expected to be installed on a handlebar or a 22mm tube.
On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the...
€39.00
(tax incl.)
TR16 is a high precision current type battery capacity tester (also known as coulometer), which can test battery voltage, current and capacity to help users know the battery condition in time. TR16 have memory...
Limited special offer
€45.00
(tax incl.)
Idéal for electric motorcycle conversion.
This throttle allows to keep the original mechanical throttle of your bike.
You can use your standard cable or the one shipped with the throttle (600mm length)
Electric...
€279.00
(tax incl.)
OZO 250W External Controller Kit - Repair and Upgrade for Electric Bikes
The OZO 250W Controller Kit is the ideal solution for repairing or upgrading your electric bike. This complete kit includes a controller, a...
€40.00
(tax incl.)
This potentiometer is perfectly compatible with the V3 analyst cycle. It will allow you to limit the power or speed of your engine while driving without having to enter the setup.
€1.20
(tax incl.)
The anti-rotation washer is essential to lock the flat axle of your hub motor in the frame brackets. By preventing it from turning under the effect of torque, it effectively protects your frame and cables from any...
€294.00
(tax incl.)
OZO 500W External Controller Kit - Repair and Upgrade for Electric Bikes
The OZO 500W Controller Kit is the ideal solution for repairing or upgrading your electric bike. This complete kit includes a controller, a...
€99.00
(tax incl.)
Easily add a motor cut-off to your electric bike equipped with hydraulic brakes!This hydraulic brake provides powerful, progressive braking and integrates an electric cut-off compatible with JULET 2-PIN male red...
€45.00
(tax incl.)
Slim digital up and down pushing buttons for limit setttings by pushing buttons as pedal assist limit.
Requires a Cycle Analyst with version 3.1 or later firmware.
Connects to white 3-pins Aux plug on CA3 device.
€20.00
(tax incl.)
Universal thumb throttle 0-5V linear. Easy to install on 22mm pipe
Limited special offer
€254.00
(tax incl.)
OZO 250W Integrated Controller Kit - Repair and Upgrade for Electric Bikes
The OZO 250W Controller Kit is the ideal solution for repairing or upgrading your electric bike. This complete kit includes an integrated...
€460.00
(tax incl.)
This 5000W motor gets 55mmm magnets and can accepts up to 5000W power.
Weight : 9,8 kg | dropout : 150mm
Pmax = 5000W / Pnom = 4000W
Max torque = 170N.m
Delivered with a 200mm cable length
€19.00
(tax incl.)
This handset including two switches (2x positions switches) can be used to start the system or switch on the lighting or in order to select between the forward/backward motion.
Suitable with every 22mm diameter...
€2.00
(tax incl.)
hub motor nut
M12 for all motors from 250W to 750W
M14 for 1000W motors
OZO offers a wide range of components for electric bicycles for the optimization or repair of electric bicycles with wheel motor or pedal motor.
