Composant ki

€10.00 (tax incl.)
For any purchase of an electric kit OZO (radiated motor + controller + accelerator or pedal crank) a mounting pack is offered to facilitate the installation of your electric kit and make it reliable.
€10.00 (tax incl.)
Multifunction switch with two positions. It can be used as an ON/OFF switch for your lighting or for your OZO controller. Supplied with 2-pin JST connector.
€2.50 (tax incl.)
The temperature sensor for CA V3 is the essential safety accessory to protect your engine against overheating. Connected directly to your Cycle Analyst V3 on-board computer, it measures the internal temperature of...
€8.90 (tax incl.)
Ce support d'accessoire double peut etre installer facilement sur tous les guidons de diamètre 25 mm à 31.8 mm. Il vous permettra notamment d'installer votre display ainsi que la gachette d'accélérateur au pouce....
€0.10 (tax incl.)
The 13G stainless steel spoke nut allows you to tighten and fix the reinforced spokes of your motorized wheel. Designed in stainless steel, it offers maximum resistance to corrosion and high tensions to ensure the...
€10.00 (tax incl.)
This bracket allows the installation of the bottom bracket sensor on the frame under the crankset, when it is not possible to install the bottom bracket sensor on the vertical frame tube. The pedal sensor’s probe is...
€9.90 (tax incl.)
12x magnets ring for pedelec sensor. Brand : Kingmeter Drive side and opposite side available. For easier installation you can use our support available here
€249.00 (tax incl.)
This 600W brushless electric motor has been specially developed to quickly add electric assistance to a traditional inflatable or rigid kayak. If your kayak comes with an original fin, you can install this electric...
€90.00 (tax incl.)
Karting bracket in steel, available in 6mm and 8mm thickness. Designed for mounting in place of the combustion engine, directly on the flanges. Compatibility : -6mm thickness: 3.5kW and 6kW motors -8mm thickness:...
€19.00 (tax incl.)
Pedal sensor compatible with the generic 250W controller for the repair of electric bikes. 2 models available: Integrated 12 magnets or V7 6 magnets The V7 comes with a 6-magnet magnetic washer. Cable length of 60...
€4.50 (tax incl.)
The speed sensor magnet is the essential accessory for operating your speed sensor. Simply attached to a spoke of your wheel, it passes in front of the sensor at each rotation to transmit an accurate measurement of...
€2.00 (tax incl.)
The clamp allows you to securely attach the components of your kit (such as the reaction arm or a bracket) directly to the bike frame. It provides a robust and durable support, perfectly resistant to the vibrations of...
€9.00 (tax incl.)
Extension for brake handle with cut-off point with sealed Julet 2-way connector for 15A and 22A controller Julet red 2-way connector compatible with many commercial electric bikes: Cycoo V-5500, TopLife V-5500,...
€399.00 (tax incl.)
This 5000W motor gets 55mmm magnets and can accepts up to 5000W power and 1000Km/h speed. Weight : 10, kg | dropout : 150mm Pmax = 5000W / Pnom = 4000W Max torque = 145N.m Kv 10 Tr/min/Volt
€20.00 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m, 1.5m Cable section: 13AWG / 2,5mm2 + after wired contact to...
€10.00 (tax incl.)
Multifunction interruptor with 2 positions It can be used as a switch for your lighting or your OZO controller Delivered with 2 JST ways connector
€160.00 (tax incl.)
Karting bracket in 316L stainless steel, available in 6mm and 8mm thickness. Designed for mounting in place of the combustion engine, directly on the flanges. Compatibility : -6mm thickness: 3.5kW and 6kW motors...
€19.00 (tax incl.)
The pedal sensor is a rotation sensor. You are required to pedal for assistance and you cannot precisely dose the desired level of assistance since this level is determined by a law of assistance specific to the...
€3.00 (tax incl.)
The torque arm clamp screws include all the necessary screws, nuts and washers to securely connect your reaction arm (torque arm) to the clamp fixed on the frame or fork of your bike. Subject to high torsional...
€10.00 (tax incl.)
This green pushing button switch is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or...
€249.00 (tax incl.)
This central rotor Brushless PMSM electric motor is designed to deliver a power of 1000W at 72V, generating a torque of 12 Nm. This is equivalent to a thermal power of 2CV. It will be perfect for retrofitting a...
€7.00 (tax incl.)
To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame. 2D plan of the M5 leg 2D plan of the M6 leg
€1.45 (tax incl.)
We can cut spokes at your convenience. Conventional rolled 18/8 stainless steel spoke with constant wire diameter from the head to the thread. 13G spokes (2,3mm diameter)
€20.00 (tax incl.)
This ebike accelerator is thumb operated. An exact copy of the accelerators found on quads or water scooters. Note that you can only install this accelerator if you have previously removed a derailleur lever....
BBS02 48V 750W - 1200W mid-drive motor BBS02 48V 750W - 1200W mid-drive motor
Limited special offer
€799.00 (tax incl.) €872.40
160N.m of torque for this 750W central motor which will be ideal for riders over 100Kg to do everything that you can imagine on your electric bike regardless of terrain and elevation.
€9.90 (tax incl.)
Battery leds gauge for lithium batteries from 12V to 72V.  This gauge can be easily glued to any battery. This gauge is completely waterproof.
€15.00 (tax incl.)
This brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper....
 Engine kit Crankset Bafang BBS02 B 500W  Engine kit Crankset Bafang BBS02 B 500W
Limited special offer
€749.00 (tax incl.) €822.40
120N.m of torque for this 36V 500W middle drive system for general use. It's appreciated by riders over 85Kg. The Bafang BBS02 36V M315 central Motor Kit is offered here in medium transmission for road and VTC.
€399.00 (tax incl.)
3500W BLDC brushless central motor Max speed is 3000 RPM under 48V, 3750 RPM under 60V and 4500 RPM under 72V. Maw torque is 50N.m Ideal to convert 50cc or 80cc into electric.
€24.90 (tax incl.)
Y splitter cable to connect one throttle on both controllers. Allows to drive simultanouesly two motors with one throttle. 3 pins JST connectors compatible with OZO controllers 25A, 35A, 40A, 60A and Kelly controllers...
€12.00 (tax incl.)
This push button is designed for installation on a 22mm handlebar or tube. On a bicycle or motorcycle, it can be used to ground the engine, deactivate the cruise control, or activate the horn. On a cart, it can be...
€25.00 (tax incl.)
This "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built...

OZO offers a wide range of components for electric bicycles for the optimization or repair of electric bicycles with wheel motor or pedal motor.

Read moreShow less
Close
Click for more products.
No products were found.

Settings

Click for more products.
No products were found.

Menu