0

Composant ki

Capteur pédalier intégré pour contrôleur 15A et 22A Capteur pédalier intégré pour contrôleur 15A et 22A

JST pedal box sensor for OZO controller

€20.00 (tax incl.)
Pedal sensor in housing for OZO controller 25A and 35A. For cases with external bearings such as Shimano hollowtech, choose the "transmission side". Very simple installation. 3-way JST male connector. Installation...
coupure frein câble connecteur jst coupure frein câble connecteur jst

Cable brake cut-off for controller 15A-22A OZO

€20.00 (tax incl.)
This 33cm brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper....
BBSHD 42T chainring BBSHD 42T chainring
Limited special offer

Bafang 1000W BBSHD 48V mid drive motor kit without battery

€999.00 (tax incl.) €1,071.40
The Beast ! More than 200N.m of torque. This 1000W middle drive motor BBSHD here in M615 version is a war machine, a Tank ! 6Kg butallows you to climb the trees. It will be perfect for heavy riders over 110Kg, extrem...
KELLY battery cable with 50A Anderson connector

KELLY battery cable with 50A Anderson connector

€25.00 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
Demi-poignée d'accélérateur avec bouton On Off Demi-poignée d'accélérateur avec bouton On Off

Half handle accelerator with 2 position button

€25.00 (tax incl.)
This half handle accelerator is compatible with all our kits. The two-position switch can be used to turn off the engine if it is wired to the "brake off" input of the controller or to power your lighting.
Base 1

Base 1

€10.00 (tax incl.)
To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame. "Base 1 M12" plan "Base 1 M14" plan
Controller Kelly motor cable Controller Kelly motor cable

Controller Kelly motor cable

€25.00 (tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on...
Ralonge moteur avec phase et capteur HALL Ralonge moteur avec phase et capteur HALL

Motor cable extender 45cm and 1m anderson PP30 / JST

€20.00 (tax incl.)
Motor cable extender 45cm and 1m Extension for motor cable with 3x 2.00mm2 cables for the phases and 5x 0.22mm2 cables for the HALL sensors. The extensions are supplied with Anderson PP30 connectors for the phases...
Interrupteur ON-OFF Interrupteur ON-OFF

Double positions siwtches handset

€14.00 (tax incl.)
Double positions siwtches handset for handlebar installation or 22mm tube. Delivered with a 2 ways JST connector and a 1100mm cable length
TORQUE ARM VISSER 2 en INOX

TORQUE ARM Base 4

€12.00 (tax incl.)
In 6.20 mm thick stainless steel To check the installation of the torque arm on your bike, you can print the plans below, cut out the part and position it on the frame. Plan "Base 4 M12" Plan "Base 4 M14"
Capteur pédalier intégré pour contrôleur 15A et 22A Capteur pédalier intégré pour contrôleur 15A et 22A

Integrated PAS sensor for OZO controller 15A and 22A

€20.00 (tax incl.)
Built-in integrated pedal sensor for square axle bottom brackets that have a minimum clearance of 4mm between crank and frame. Compatible with OZO Touring and Enduro kits. Very simple installation. Julet three-way...
Qu'est ce qu'un Torque ARMS ? Qu'est ce qu'un Torque ARMS ?
Limited time offer

Display for Bafang protocol

€99.00 (tax incl.) €129.00
OZO offers you to choose from three models of displays with Bafang protocol UART 5.2 and 5.8 with cylindric green 5 pins female connector. Compatible with all bbs series central motor from Bafang and some OZO hub...
10 kw Electric retrofit motor watercooling 10 kw Electric retrofit motor watercooling

Central electric motor 10kW brushless liquid cooling

€999.00 (tax incl.)
Special retrofit for boats, motorcycles, go-karts, ATVs, or sailboats, this IPM brushless electric motor with a central rotor is designed to deliver a power output of 6kW to 10kW depending on the supply voltage of...
Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo

Thumb throttle with switch for ebikes

€29.00 (tax incl.)
his accelerator for electric bicycles is activated with the thumb. Cable length: 1m This model is versatile, meaning you can install it on the right or left side of your handlebar. This set includes a waterproof...
TORQUE ARM VISSER 2 en INOX

TORQUE ARM Base 3

€12.00 (tax incl.)
In 6.20 mm thick stainless steel To check the installation of the torque arm on your bike, you can print the plan below, cut out the part and position it on the frame. Plan "Base 3 M12"
KELLY battery cable with 150A Anderson connector

KELLY battery cable with 150A Anderson connector

€35.00 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m,  Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo

Thumb throttle with switch for ebikes

€29.00 (tax incl.)
his accelerator for electric bicycles is activated with the thumb. Cable length: 1m This model is versatile, meaning you can install it on the right or left side of your handlebar. This set includes a waterproof...
Jante MACH1 610 Jante MACH1 610

MACH1 ROAD RUNNER Rim

€29.90 (tax incl.)
The MACH1 ROAD RUNNER rim is a semi-profiled rim with eyelets, ideal for thin tyres and compatible with wide tyres for more comfort. In 700.
Poignée de frein à contact pour Bafang BBS01 BBS02 BBSHD Poignée de frein à contact pour Bafang BBS01 BBS02 BBSHD

Bafang brake ebrakes

€20.00 (tax incl.)
Bafang ebrake for BBS01 BBS02 BBSHD Maxdrive Can also be plugged on any ebikes with Julet waterproof connector 3 pins.
Moteur 500W 1000W brushless central inner rotor Moteur 500W 1000W brushless central inner rotor

Moteur 500W 1000W brushless central inner rotor

€199.00 (tax incl.)
Central brushless BLDC motor that can deliver 500W under 24V, 750W under 36V and 1000W unde 48V. Can drive any rotating tools or small kids electric  motorcycle or scooter. Max speed is 3500 Tr/min under 48V Max...
Base 1 Base 1
Limited special offer

Pack Torque arm to screw M5 / M6

€19.00 (tax incl.) €21.50
The Torque Arm allows to limit the stress on the bike frame, at the level of the wheel fixing beaks, to avoid any deformation. It is highly recommended for kits over 400W.
Adaptateur éclairage Anderson vers 2 JULET Mâle Z209AG Adaptateur éclairage Anderson vers 2 JULET Mâle Z209AG

ANDERSON to JULET Z209AG adapter

€25.00 (tax incl.)
ANDERSON to JULET Z209AG adapter. Allows to install ebikes lights by connecting in series between batetry and controller
Moteur Moteur

Agriculture electric wheel 500W universal brushless motor

€390.00 (tax incl.)
This 500W-1000W electric brushless universal motor offers the ability to choose different wheel diameters and tire widths with its removable aluminum machine casted rim flanges. The ability to remove the rims makes...
Cable de programmation

Programming cable for cycle analyst

€20.00 (tax incl.)
This cable allows to update your cycle analyst with the last software version and also to read and set all datas on your computer.
Base hexagonale

hexagonal base

€21.00 (tax incl.)
This hexagonal base offers angular freedom that allows it to adapt to all frame geometries. To check the installation of the torque arm on your bike, you can print the plan below, cut out the part and position it on...
Contacte magnétique pour frein hydraulique Contacte magnétique pour frein hydraulique

Hydraulic brake cut-off for controller 15A and 22A

€20.00 (tax incl.)
Magnetic contact to activate the brake cut on your 15A or 22A system while maintaining your original hydraulic brakes. Also compatible with all bikes equipped with a 2-way Julet connector. Length 34cm
3-Way JST extension cable 3-Way JST extension cable

3-Way JST extension cable

€8.00 (tax incl.)
This extension cable has a 3-way JST connector for pedal sensor or accelerator. With switch 3-Position. Available in 3 lengths : 30 cm 50 cm 100 cm
KELLY motor cable with XT150 connector

KELLY motor cable with XT150 connector

€35.00 (tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
Régulateur de vitesse

Cruise control for electric bike

€25.00 (tax incl.)
speed control device for electric bicycle. On the same principle as your car’s cruise control: you select a cruising speed, you release the accelerator and the electronics regulate the engine power to maintain a...
Intérupteur 3 positions 3 position switch for OZO controller

3 position switch for OZO controller

€15.00 (tax incl.)
Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...

OZO offers a wide range of components for electric bicycles for the optimization or repair of electric bicycles with wheel motor or pedal motor.

Read moreShow less
Close
Click for more products.
No products were found.

Settings

Click for more products.
No products were found.

Menu

Please sign in first.

Sign in