€50.00
(tax incl.)
Gift voucher worth 50 € to 200 €
Valid for 1 year on all products on the site
Chargement des images...
pedelec magnet ring holder adapter
These adapters allow to install the pagnet ring of your pedelec sensor on any bottom bracket standard.
€10.00
(tax incl.)
Reference:
002244
You may also like
€8.00
(tax incl.)
This extension cable has a 3-way JST connector for pedal sensor or accelerator. With switch 3-Position. Available in 3 lengths :
30 cm
50 cm
100 cm
€9.90
(tax incl.)
12x magnets ring for pedelec sensor.
Brand : Kingmeter
Drive side and opposite side available.
For easier installation you can use our support available here
€20.00
(tax incl.)
Pedal sensor in housing for OZO controller 25A and 35A.
For cases with external bearings such as Shimano hollowtech, choose the "transmission side".
Very simple installation.
3-way JST male connector.
Installation...
€19.00
(tax incl.)
The pedal sensor is a rotation sensor. You are required to pedal for assistance and you cannot precisely dose the desired level of assistance since this level is determined by a law of assistance specific to the...
We offer different adapters for all botttom bracket standards :
4x90 (compact standard 11V double chainring 4X110)
4x94 (single chainring MTB 94BCD)
4x104 (Main MTB standard - 104BCD)
5x72 (Road bicycle with 3x rings 5x130 ou 5x135mm)
5x110 (Road compact standard double chainring 5x110mm)
For MTB standard 76 BCD (4x76) it's not necessary to use adapter as you can directly install the magnet ring with glue.
How to check your standard ?
4 holes :
How to install the magnet ring on adapter :
Customers who bought this product also bought:
€17.90
(tax incl.)
Same positioning of the bracket on the handlebar or stem. Our bottle cage adapter is attached with two clamps. Either on the outside of the ahead spacer (mostly sport, trekking and MTBs) or directly on the standard...
€39.95
(tax incl.)
This frame bag has been designed to accompany all cycling adventurers, whether on road, gravel, mountain bike or touring bikes. The Z Adventure C4 are mounted on all bikes thanks to the removable and adjustable...
€5.00
(tax incl.)
The Stretch Neoprene Base Protector for bicycles provides protection against scratches, impacts, and outdoor elements.
Made of neoprene, it fits snugly around the bike base, and its velcro system ensures a secure,...
€19.00
(tax incl.)
The high power LED provides a light source, equipped with a precision light guide strip.
Limited special offer
€25.00
(tax incl.)
€28.50
The base 3 is in stainless steel of 6.20mm thickness.
To check the installation of the torque arm on your bike, you can print the plan below, cut the part and position it on the frame.
Plan "Base 3 M12"
Leave a review