Bafang 1000W BBSHD 48V mid drive motor kit without battery

The 46 tooth chainring in steel is the chainring that Bafang originally delivered with the BBSHD.

But depending on your practice, OZO offers you smaller platters that will allow you to gain torque.

For mixed use, we recommend the 42 tooth offset chainring.

All connectors are waterproof and have visual keying. You can't go wrong when plugging in.

A single cable goes up from the engine to the handlebars to connect the various accessories:

2 yellow connectors for brake cuts

1 Green connector for the control screen on the handlebars (display)

1 yellow connector for the accelerator (optional)

Black and white vertical display, entry level: Black and white display, it combines all the main functions. The original mount is intended for installation on the handlebars, but we offer an optional stem mount for the MTB. 9 assistance modes. 

Compact color display: Its compact format makes it perfect for committed mountain biking. It sits on the left of the handlebars so you cannot use it if you have the derailleur lever on the left of the handlebars. 9 assistance modes.

Vertical color display: With this display, you access what is best on the eBike market. This model displays more parameters and it has an auto-adaptive backlight and a USB port for charging a smartphone or GPS while riding. 9 assistance modes fully configurable by the user: You are free to configure the 9 modes so that your assistance best adapts to your needs.

The accelerator offers the possibility of controlling the engine without pedaling.

In the form of a thumb trigger, the throttle can be installed on the right or left of the handlebars.

Note, however, that the accelerator is not approved for driving on a road open to traffic.

He finds his interest on a mountain bike to help with hill starts and obstacle passages.

The brake cut-off is an additional safety device which cuts off the power supply to the motor during braking. This is particularly useful during delicate maneuvers.

The brake cut-off comes in different forms:

The brake handles that replace your original handles.

The cable sensor that is installed on the brake cable.

The magnetic sensor to be reserved for bicycles equipped with hydraulic brakes.

Pair of reinforced cranks in 175 mm length for Bafang crankset motor. Ideal for freeride or enduro mountain biking if you weigh more than 90Kg.

OZO has selected the best E-MTB tires on the market for you. With integrated puncture protection or double ply, you will find all the tires in the tires section

The battery is delivered with a 2A charger as standard.

If you want to halve the charging time, you can opt for the 36V 4A charger.

The bottom bracket adapters will allow you to install the bottom bracket motor on PRESSFIT BB30 or PF30 (specialized) or US (BMX) standard bottom brackets.

The Bafang motor is assisted by the pedal. It is the chain of your bike that will transmit all the power of the engine. It is advisable to install a reinforced chain in order to prevent the chain from breaking.

You will find reinforced chains for crank motors in the reinforced chains section.

The only specific tool you will need for installing the Bafang crank motor is the torque wrench.

Note that this tightening wrench is also used to unscrew the outer bearings of the Shimano Hollowtech bottom brackets.

Removing the original crankset from your bike may also require more standard tools such as a crank remover or a square axle bottom bracket remover.

On this 250W crankset motor kit dedicated to mountain biking, OZO offers you as standard its mapping optimized with passion by our experienced mountain bikers and improved over the years since 2013.

The response times are set to the minimum, the acceleration ramp is dynamic for quick revivals and the torque is unbridled to the maximum to climb trees.

Note that for specific projects, we can optionally create custom maps

. 

The BBS02 crankset motor is designed to be installed on BSA standard frames, i.e. with an internal case diameter of 33.5mm (Measure A) and a length of 68mm to 73mm (Measure B)

There are two types of mounting for bottom bracket bearings, those with internal bearings and those with external bearings. In both cases, measurements are always taken at the frame level as illustrated opposite.

The measurement A corresponds to the internal diameter of the case, it is taken inside the tube edge to edge. The standard is 33.5mm. If you have more, you will need to take the appropriate adapter.

Measurement B corresponds to the length of the frame box, this is done between the two ends of the frame tube. You must have between 68mm and 73mm. If you have more (83mm, 92mm, 100mm ...) you will have to choose the BBSHD crankset motor.

To be sure that your measurement is correct, we invite you to watch the video "How to measure the bottom bracket of your bike?"