THE ADVANTAGES OF THE 750W MIDDLE MOTOR KIT
World No. 1 in the manufacture of bicycle motors, the reputation of the Bafang brand is well established. Reliable, silent and terribly efficient products.
OZO has been an official Bafang distributor since 2010 and some of our customers have traveled more than 100,000Km with this engine.
The BBS02 48V 750W middle motor is offered here in a special E-MTB version with a short transmission allowing the installation of an anti-derailment transmission chainring in 34 or 36 teeth and a mapping entirely modified to meet the requirements of mountain bikers. These two major modifications make it possible to reach a torque of 160N.m, which is the highest torque that you will be able to find on a 750W crank motor of all brands.
In addition to being more efficient, it is also quieter than competing motors thanks to its oriented field controller while being easy to maintain and install. To get an idea of the ease of installation, you can watch the installation tutorial.
The Bafang crankset motor kit can be installed on 90% of traditional bikes without modification to the existing frame.
We recommend this 750W crankset motor for mountain bikers wishing to stay within the 750W standard or for users of cargo bikes.
THIS KIT CONTAINS
THE BAFANG MIDDLE MOTOR
The Bafang BBS02 middle motor is installed in place of the original crankset.
Designed as a single unit, it integrates the motor, the controller and the pedal sensor.
Installation is easy and does not require any modification to the frame.
All the screws required for installation are supplied as standard.
THE WIRING HARNESS
All connectors are waterproof and have visual keying. You can't go wrong when plugging in.
A single cable goes up from the engine to the handlebars to connect the various accessories:
2 Red connectors for brake cuts
1 Green connector for the control screen on the handlebars (display)
1 yellow connector for the accelerator (optional)
You will need to power your BBS02 crankset motor kit with a 48V battery. All 48V batteries in our catalog are compatible with this engine.
The choice of battery capacity should be made according to the autonomy you want. For example, a 500Wh battery will give you around 50Km of autonomy without forcing the bike and up to 100Km depending on your effort. A 1000Wh battery will give you double the autonomy.
The second criterion to take into account when choosing the battery will be where you want to install the battery on your bike. For this we offer "PVC" batteries.
The "PVC" battery does not have a fairing and will therefore be lighter and cheaper, but you will have to install it in a bag or a backpack to ensure its protection. The use in a backpack is our preference for the practice of mountain biking or electric mountain biking because the bike is lighter and therefore more manageable and the battery will be less subject to vibrations on heavy terrain.
The autonomy indicated above according to the capacity of the battery represent an average that a cyclist of 75Kg can cover in the city or in the countryside on a slightly hilly course. For the above range calculation, we take a consumption base of 7Wh / km. The actual range you will get will depend on various factors such as your weight, tire pressure, the gradient of the course ...
THREE CHOICE OF CONTROL SCREENS (display)
Black and white vertical display, entry level: Black and white display, it combines all the main functions. The original mount is intended for installation on the handlebars, but we offer an optional stem mount for the MTB. 9 assistance modes.
Compact color display: Its compact format makes it perfect for committed mountain biking. It sits on the left of the handlebars so you cannot use it if you have the derailleur lever on the left of the handlebars. 9 assistance modes.
Vertical color display: With this display, you access what is best on the eBike market. This model displays more parameters and it has an auto-adaptive backlight and a USB port for charging a smartphone or GPS while riding. 9 assistance modes fully configurable by the user: You are free to configure the 9 modes so that your assistance best adapts to your needs.
The accelerator offers the possibility of controlling the engine without pedaling.
In the form of a thumb trigger, the throttle can be installed on the right or left of the handlebars.
Note, however, that the accelerator is not approved for driving on a road open to traffic.
He finds his interest on a mountain bike to help with hill starts and obstacle passages.
The brake cut-off is an additional safety device which cuts off the power supply to the motor during braking. This is particularly very practical during delicate maneuvers in town in particular.
The brake cut-off comes in different forms:
The brake handles that replace your original handles.
The cable sensor which is installed on the brake cable and which keeps the original handles (ideal for road bikes with pressure cookers).
The magnetic sensor to be reserved for bicycles equipped with hydraulic brakes.
The derailleur sensor cuts off power to the crank motor during gear change, thus preventing premature deterioration of your transmission.
We strongly recommend it for mountain biking in which the speeds are often changed "on the fly" by two or three.
OZO has selected the best electric bicycle tires on the market for you. German manufacture Schwalbe tires have a thick anti-puncture protection and a very resistant rubber.
Their lifespan is of the order of 10,000 km.
You will find all the tires in the tires section
The battery is delivered with a 2A charger as standard.
If you want to halve the charging time, you can opt for the 36V 4A charger.
Adapter for 4-hole or 5-hole table top.
Allows the mounting of conventional transmission chainrings to the MTB standard 4 holes (4x104 BCD) or 5 holes Campagnolo (5x135) or Shimano (5x130 or 5x110).
Also offers the possibility of making a double plate assembly.
The Bafang motor is assisted by the pedal. It is the chain of your bike that will transmit all the power of the engine. It is advisable to install a reinforced chain in order to prevent the chain from breaking.
You will find reinforced chains for crank motors in the reinforced chains section.
The only specific tool you will need for installing the Bafang crank motor is the torque wrench.
Note that this tightening wrench is also used to unscrew the outer bearings of the Shimano Hollowtech bottom brackets.
Disassembling the original crankset from your bike may also require more standard tools such as a crank remover or a square axle bottom bracket remover.
Factory mapping will be fine for urban use, but some will find it lacking in dynamism.
At OZO, we have developed an optimized mapping allowing to reduce the response times to the activation and to the stop of pedaling and to draw the full potential of the pedal motor to such an extent that the customers having compared the two mappings ask us why we do not only offer ours because the difference in performance is so obvious.
For specific projects, we can optionally create custom maps in order to configure the response times, the acceleration curve, the torque and the speed on the various assistance modes, the operation of the accelerator, etc.
ON WHICH BIKE CAN I INSTALL A BAFANG MIDDLE MOTOR?
The BBS01 crankset motor is designed to be installed on BSA standard frames, i.e. with an internal case diameter of 33.5mm (Measure A) and a length of 68mm to 73mm (Measure B)
There are two types of mounting for bottom bracket bearings, those with internal bearings and those with external bearings. In both cases, measurements are always taken at the frame level as illustrated opposite.
The measurement A corresponds to the internal diameter of the case, it is taken inside the tube edge to edge. The standard is 33.5mm. If you have more, you will need to take the appropriate adapter.
Measurement B corresponds to the length of the frame box, this is done between the two ends of the frame tube. You must have between 68mm and 73mm. If you have more (83mm, 92mm, 100mm ...) you will have to choose the BBSHD crankset motor.