Controllers
The controller (also called variator) is the brain of your electric bike motorization kit. It is an electronic case that manages the motor. The controller receives an information (control signal) from the pedelec or from the full twist throttle and manages the motor power according to this information.
All of our controllers initially include:...
coupure frein câble connecteur jst
15,00 € In StockThis brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper. Connector: JST for the 25A OZO controller.
KELLY battery cable with 150A Anderson connector
35,00 € In StockStandard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m, Cable section: 10AWG / 5mm2 + after wired contact to switch on the controller
KELLY battery cable with 50A Anderson connector
25,00 € In StockStandard cable with special lugs for screw terminal block of KELLY controllers.Standard length: 35cm / Optional extension possible: 50cm, 1mCable section: 10AWG / 5mm2+ after wired contact to switch on the controller
KELLY motor cable with XT150 connector
35,00 € In StockStandard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on the controllerCycle analyst V3 DPS
209,00 € OUT OF STOCKThe V3 Cycle Analyst is the next step for the CA product line to not only monitor what is going on in an ebike, but also control it. In the V2 CA we included basic throttle over-ride capabilities for speed, current, and low voltage limiting that proved quite popular, but fundamentally it was mostly a passive display. With the V3 Cycle Analyst, all the...
Controller Kelly motor cable
25,00 € In StockStandard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on the controllerV7 pas sensor for OZO universal controller
19,00 € IN STOCKV7 pas sensor for OZO universal controller 6 magnets ring included in the package
Controller Kelly Battery cable 40A
20,00 € In StockStandard cable with special lugs for screw terminal block of KELLY controllers.Standard length: 35cm / Optional extension possible: 50cm, 1m, 1.5mCable section: 10AWG / 5mm2+ after wired contact to switch on the controller3 position switch for OZO controller
15,00 € In StockThree-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are programmed on 30%, 60% and 100% as standard. Note that we can program the three power levels differently by custom programming the controller.15A 250W controller box frame mount
12,90 € In StockThis case will allow you to aesthetically fix your 15A 250W controller on the frame of your bike. The box is installed on the vertical frame tube using two clamps. Your frame tube should have a maximum diameter of 36mm.Main wiring harness for 15A and 22A OZO controller BFG
25,00 € In StockMain wiring harness (Eb-bus) for 15A and 22A OZO controller working with Bafang protocol.coupure frein câble connecteur jst
20,00 € In StockThis 33cm brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper. Connectors: Julet 2 pins for touring kit controller and enduro and VAE trade.Y splitter cable 3 pins JST for throttle
24,90 € IN STOCKY splitter cable to connect one throttle on both controllers. Allows to drive simultanouesly two motors with one throttle. 3 pins JST connectors compatible with OZO controllers 25A, 35A, 40A, 60A and Kelly controllers and generic controller.
pedelec magnet ring holder adapter
10,00 € In StockThese adapters allow to install the pagnet ring of your pedelec sensor on any bottom bracket standard.Thumb throttle for OZO ebikes kits 1000W and 1500W
20,00 € In StockThis thumb throttle is delivered with JST 3 pins male connector (SM3A) so it's fully compatible with any OZO hub motors kits from 1000W to 1500W. You can install it on left side or right side of your handlebar.
Controller 25A 12V 24V 36V 48V dual sensored sensorless for brushless motor
119,00 € In StockThe OZO controller 12V 24V 36V 48V integrates high quality electronic components from the automotive world. Dual sensored / sensorless adaptive field-oriented sinusoidal mapping (FOC) will allow you to power the majority of brushless motors (BLDC) on the market.Hydraulic brake sensor
20,00 € In StockMagnetic contact to activate the brake cut on your 15A or 22A system while maintaining your original hydraulic brakes. Also compatible with all bikes equipped with a 2-way Julet connector. Length 34cm
Controller 12V 15A brushless sensorless
40,00 € In Stock12V 15A controller to power a brushless motor operating in 12V. Sensorless only. Ideal for powering scooter motors in 5" or 6" The controller has the safety function "pedal first", that is to say that it is necessary to start the engine for the accelerator is active.Universal thumb throttle 0-5V linear
29,00 € IN STOCKUniversal thumb throttle 0-5V linear. Easy to install on 22mm pipeHalf handle accelerator
18,00 € Out of stockHalf handle type accelerator. Ideal for long rides and people used to motorcycle.
Frein à contact JST
15,00 € Product available with different optionsProduct available with different options
12x magnets ring 12x for pedelec sensor
9,90 € In Stock12x magnets ring for pedelec sensor. Drive side and opposite side available.Contact brake handle for controller 15A 22A OZO
20,00 € STOCKContact brake handle compatible with the 22A OZO controller You can buy a right handle or a left or the pair. Two colors available: Gray or black.
Rallonge moteur 9 PINS 110cm
15,00 € ARRIVED OUT OF SEPTEMBERCable extension for electric bicycle hub motor with waterproof connector 9 Pins Julet Z910AT Available in three lengths: - 30cm - 45cm - 110cmHalf handle accelerator with push button
25,00 € In StockThis "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built into the LED headlight.
Mini scooter controller 36V 250W
45,00 € In StockMini scooter or kick scooter controller 36V 250W. Pedal first function, lcd display, active regenerative braking with throttleHalf handle accelerator with 2 position button
25,00 € In StockThis half handle accelerator is compatible with all our kits. The two-position switch can be used to turn off the engine if it is wired to the "brake off" input of the controller or to power your lighting.Controller 40A 48V - 72V SENSORED/SENSORLESS OZO SINEWAVE FOR MOTOR BRUSHLESS
179,00 € In StockController 48V to 72V - 40A dual sensored sensorless for brushless motor. Regen passive, compatible analsyt V3 cycle, engine temperature sensor. Programmable mapping. Recommended with our DD35, DD45, D55, Crown TC40100, HS4080, H55100 engines.
Thumb throttle with battery gauge and switch for ebikes
30,00 € In StockThumb throttle with Battery indicator and ON/OOF switch for Ebikes. You can install it on the right or Left side of your handlebar. Available in two Voltage: 36V gauge or 48V.Lock-on type half handle accelerator for ebike
25,00 € In StockThe new half handle has a much smaller outside diameter than the old one, which allows a perfect integration on the handlebar without generating gear shifting. The diameter is identical to that of the lock-on handles.
Controller Kelly KLS7212N 48V-72V 160A
299,00 € STOCKKelly KLS7212M High Performance Sinewave programmable Controller. Can work from 48V to 84V and offers 70A rated current and 160A peak. Ideal for emotorcycles, gocart, or industrial projects. You can program it easily with the Software
Displays selection for wheel motor 250W to 750W
79,00 € In StockOZO offers 3x different display models. The display is the screen on the ebikes handlebar. It shows all electrical and run datas such as battery state of charge, speed, distance and allows to select the assist power between 9 different levels.
Hydraulic brake sensor
15,00 € Out of stockMagnetic contact JST to activate the brake cut on a bicycle equipped with hydraulic brakes. For 25A and 35A OZO controller You keep your original hydraulic brakes.
Kelly controller 100A KLS7245N 36V 48V 60V 72V
349,00 € STOCKHigh Performance Sine wave Controller for Lithium battery up to 72V. Rated current is 100A. Max current is 320A (30s).This driver is perfect for all projects using Brushless motor suche as electric boat, motorcycle or AGV.
Brake JST extension cable
10,00 € In StockThis brake extension cable has a JST connector available in : - 30cm - 50cm
3-Way JST extension cable
8,00 € IN STOCKThis extension cable has a 3-way JST connector for pedal sensor or accelerator. With switch 3-Position. Available in 3 lengths :30 cm 50 cm 100 cmZEFAL Z Frame bag for OZO controller and battery 100Wh
20,00 € In StockThe Z Frame Pack is a frame bag which is mounted on the horizontal tube at the rear. It is ideal for carrying tools, a mini pump, energy bars, a phone, a rain gear ...Dimensions: 270 x 100 x 80mm / 10.6 x 3.9 x 3.2 "Industrial controller 25A 12V 24V 36V 48V for brushless motor
149,00 € In StockThe OZO controller 24V 36V 48V integrates high quality electronic components from the automotive world. Dual sensored / sensorless adaptive field-oriented sinusoidal mapping (FOC) will allow to power main brushless DC motors (BLDC) which ride at low speed and high torque..Integrated crank pedal sensor 4mm JST connector
20,00 € STOCKBuilt-in pedal sensor for square axle bottom brackets that have a minimum clearance of 4mm between crank and frame. Compatible with OZO Touring and Enduro kits. Very simple installation. Three-way JST connector. Pedal sensor installation instructions
500A sinus controller 24V 36V 48V 60V 72V brushless
599,00 € STOCKHigh Performance Sine wave Controller for Lithium battery up to 72V. Rated current is 100A. Max current is 350A (30s).This driver is perfect for all projects using Brushless motor suche as electric boat, motorcycle or AGV.35A FOC controller 24V 36V 48V brushless motor
159,00 € In StockThe OZO 35A controller features dual sensored / sensorless field oriented (FOC) sinusoidal mapping, which makes it compatible with most brushless electric motors. Temperature protection It will be perfect to drive our direct drive motors in 24V, 36V and 48V. Compatible with: V2 and V3 analyst cycle, three position switch, cruise control, ON / OFF...Main wiring harness for 15A and 22A OZO controller
25,00 € IN STOCKMain wiring harness for 15A and 22A OZO controller. 9-way Julet connector.Simplified main harness for display only for wheel motor
25,00 € In stockCable harness to connect your display to your OZO wheel motor.Bouton poussoir rond vert
10,00 € In StockThis red pushing button is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the speed regulatior or moreover activate the horn On a cart, it can be used to drive the motor by pressureDelivered with 2 JST ways connector250W 36V 15A external controller for OZO hub motors
90,00 € Back orderThe OZO 15A Controller, equipped with Field-Oriented Control (FOC) technology, ensures optimal performance for OZO Brushless motors. Its IP6-rated tropicalization and waterproof connectors provide exceptional reliability. Installation is made easy with visual keying on each connector, eliminating the risk of connection errors. Elevate your driving...Integrated crank pedal sensor 4mm waterproof connector
20,00 € STOCKBuilt-in pedal sensor for square axle bottom brackets that have a minimum clearance of 4mm between crank and frame. Compatible with OZO Touring and Enduro kits. Very simple installation. Julet three-way waterproof connector. Pedal sensor installation instructionsBouton poussoir rond rouge
10,00 € In StockThis red pushing button is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the speed regulatior or moreover activate the horn On a cart, it can be used to drive the motor by pressure15A Controller integrated in holder for frame battery
115,00 € In StockThe OZO 15A Controller, equipped with Field-Oriented Control (FOC) technology, ensures optimal performance for OZO Brushless motors. Its IP6-rated tropicalization and waterproof connectors provide exceptional reliability. Installation is made easy with visual keying on each connector, eliminating the risk of connection errors. Elevate your driving...Interrupteur double pour vélo électrique (1 interrupteur 2 positions + 1 bouton poussoir)
14,00 € In StockDouble combined for handlebar installation or 22mm tube. Equipped with two pushing buttons,one green and one red. This product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any other rolling base. Delivered with a 2 ways JST connector and a 1100mm cable length22A Controller integrated in holder for frame battery
130,00 € In StockThe OZO 22A Controller, equipped with Field-Oriented Control (FOC) technology, ensures optimal performance for OZO Brushless motors. Its IP6-rated tropicalization and waterproof connectors provide exceptional reliability. Installation is made easy with visual keying on each connector, eliminating the risk of connection errors. Elevate your driving...
- 1
- 2
Showing 1 - 60 of 104 items
