Composant ki
OZO offers a wide range of components for electric bicycles for the optimization or repair of electric bicycles with wheel motor or pedal motor.
Mounting pack for electric kit
10,00 € In StockFor any purchase of an electric kit OZO (radiated motor + controller + accelerator or pedal crank) a mounting pack is offered to facilitate the installation of your electric kit and make it reliable.
KELLY battery cable with 150A Anderson connector
35,00 € In StockStandard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m, Cable section: 10AWG / 5mm2 + after wired contact to switch on the controller600W brushless electric motor for kayak
269,00 € IN STOCKThis 600W brushless electric motor has been specially developed to quickly add electric assistance to a traditional inflatable or rigid kayak. If your kayak comes with an original fin, you can install this electric motor in just one minute, allowing you to navigate effortlessly at an average speed of up to 8 km/h. Thrust = 12kg (26 lbs) This motor is...Central 15000W electric motor with water cooling for boats.
1 490,00 € In StockEspecially designed for motorcycle, karting, boat, or sailboat Specially designed for retrofitting boats, motorcycles, karts, quads or sailboats, this IPM brushless electric motor with central rotor is designed to deliver 20kW continuous power and up to 50kW peak power at 48V, 60V, 72V, 84V or 96V DC, making it perfect for converting a boat or sailboat...Half handle accelerator
18,00 € In StockHalf handle type accelerator. Ideal for long rides and people used to motorcycle.
Frein à contact JST
15,00 € Product available with different optionsProduct available with different options
Central Brushless Motor 6kW
790,00 € In StockBrushless BLDC 6kW motor to convert any bike 125cc or 250cc into electric. Can also powered electric boat or karting 9,1kg
KELLY battery cable with 50A Anderson connector
25,00 € In StockStandard cable with special lugs for screw terminal block of KELLY controllers.Standard length: 35cm / Optional extension possible: 50cm, 1mCable section: 10AWG / 5mm2+ after wired contact to switch on the controllerHalf handle accelerator with push button
25,00 € In StockThis "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built into the LED headlight.3 position switch for OZO controller
15,00 € In StockThree-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are programmed on 30%, 60% and 100% as standard. Note that we can program the three power levels differently by custom programming the controller.
pedelec magnet ring holder adapter
10,00 € In StockThese adapters allow to install the pagnet ring of your pedelec sensor on any bottom bracket standard.
KELLY motor cable with XT150 connector
35,00 € In StockStandard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on the controllerCentral 1500W electric motor for small motorcycles, dirt bikes, pit bikes.
399,00 € In StockThis Brushless PMSM Electric Motor (Permanent Magnet Inner Rotor Motor) with Hall effect sensors is designed to deliver a power of 1500W at 48V, generating a torque of 25 N.m and a maximum rotational speed of 4800 rpm. The internal gear system allows it to deliver higher torque compared to a traditional central motor. The motor is intended to be...
12x magnets ring 12x for pedelec sensor
9,90 € In Stock12x magnets ring for pedelec sensor. Drive side and opposite side available.5000W motorcycle bike rear wheel motor
399,00 € Out of stockThis 5000W motor gets 55mmm magnets and can accepts up to 5000W power and 1000Km/h speed. Weight : 10, kg | dropout : 150mm Pmax = 5000W / Pnom = 4000W Max torque = 145N.m Kv 10 Tr/min/Volt
Accelerator stand straight or elbow shaped
9,90 € En StockAccelerator stand straight or elbow shaped for wheelbarrow, cart, agricultural and industrial machineryXLC double accessories adapter Ø28.6mm headset
22,00 € Out of stockCe support d'accessoire double peut etre installer facilement sur tous les pivots de direction en diamètre 28.6 mm avec potence headset. Il vous permettra notamment d'installer votre display ainsi que la gachette d'accélérateur au pouce.Diamètre du tube de fourche : Ø28,6mm Diamètre des supports accessoires : 22mm Matière : Aluminium 6010 , CNC...
Controller Kelly motor cable
25,00 € In StockStandard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on the controller3500W BLDC brushless central motor
429,00 € IN STOCK3500W BLDC brushless central motor Max speed is 3000 RPM under 48V, 3750 RPM under 60V and 4500 RPM under 72V. Maw torque is 50N.m Ideal to convert 50cc or 80cc into electric.
150A Wattmeter 5V to 60V DC
29,00 € In StockThis Wattmeter is the ideal tool for all those who wish to have a reliable autonomy and power gauge. It will allow you to have an accurate reading of the battery voltage, the power consumed and the energy consumed. You can also use it on a solar installation to measure the amount of energy produced by your panels.
Controller Kelly Battery cable 40A
20,00 € In StockStandard cable with special lugs for screw terminal block of KELLY controllers.Standard length: 35cm / Optional extension possible: 50cm, 1m, 1.5mCable section: 10AWG / 5mm2+ after wired contact to switch on the controllerElectric retrofit motor for motocycle or karting
299,00 € In StockThis central rotor Brushless PMSM electric motor is designed to deliver a power of 1000W at 72V, generating a torque of 12 Nm. This is equivalent to a thermal power of 2CV. It will be perfect for retrofitting a thermal motorcycle into an electric motorcycle for children, karting, or any other electric vehicle project. To be installed in place of the...
double accessories adapter Ø25 - 31.8mm
8,90 € In StockCe support d'accessoire double peut etre installer facilement sur tous les guidons de diamètre 25 mm à 31.8 mm. Il vous permettra notamment d'installer votre display ainsi que la gachette d'accélérateur au pouce.Diamètre du guidon : Ø25 à 31.8mm Diamètre des supports accessoires : 22mm Matière : Aluminium Couleur : Noir
15A 250W controller box frame mount
12,90 € In StockThis case will allow you to aesthetically fix your 15A 250W controller on the frame of your bike. The box is installed on the vertical frame tube using two clamps. Your frame tube should have a maximum diameter of 36mm.Neiman
20,00 € In StockYou lost your keys! This is the barrel identical to the batteries of the following SilverFish SSE-014 models: Hilltecks, Gitane, Moma Bike, CyclEurope, Moov In, TommyBike, Proxy cycles, Voltaway, Maa Bikes, Vélobecane, Pietro bike and Wattitud This neiman is perfectly suited to using a 24V, 36V or 48V PVC battery with an OZO kit. For example, you can...1000W - 2000W central motor inner rotor MAC 12980
399,00 € Availability on demandCentral brushless BLDC inner rotor motor to power tools or kids motorcycle or mini scooter. Brushless BLDC motor can be powered under 24V, 36V or 48V. Max power is 1000W under 24V, 1500W under 36V and 2000W with 48V battery. Top speed is 3500 Tr/min Max torque is 10N.m
Lithium battery leds capacity gauge 24V 36V 48V
8,00 € In StockCapacity Leds gauge for Lithium batteries. Select the appropriate voltage : 24V, 36V and 48V. 5x leds ON when battery is full of charge.
Motor shaft spacers
0,50 € In StockMotor shaft spacers are available for any kind of ebikes motor hub and allows to center the wheel inside the frame.
Main wiring harness for 15A and 22A OZO controller BFG
25,00 € In StockMain wiring harness (Eb-bus) for 15A and 22A OZO controller working with Bafang protocol.coupure frein câble connecteur jst
20,00 € In StockThis 33cm brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper. Connectors: Julet 2 pins for touring kit controller and enduro and VAE trade.Moteur 500W 1000W brushless central inner rotor
199,00 € Availability on demandCentral brushless BLDC motor that can deliver 500W under 24V, 750W under 36V and 1000W unde 48V. Can drive any rotating tools or small kids electric motorcycle or scooter. Max speed is 3500 Tr/min under 48V Max torque is 5N.m 16 poles Integrated NTC 10K as temperature sensor
coupure frein câble connecteur jst
15,00 € In StockThis brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper. Connector: JST for the 25A OZO controller.
écrou moteur nylestop
2,50 € Product available with different optionsProduct available with different options
Hydraulic brake sensor
15,00 € In StockMagnetic contact JST to activate the brake cut on a bicycle equipped with hydraulic brakes. For 25A and 35A OZO controller You keep your original hydraulic brakes.Bouton poussoir rond vert
10,00 € In StockThis red pushing button is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the speed regulatior or moreover activate the horn On a cart, it can be used to drive the motor by pressureDelivered with 2 JST ways connector
Support inox karting
120,00 € IN STOCKKarting bracket in 316L stainless steel, available in 6mm and 8mm thickness. Designed for mounting in place of the combustion engine, directly on the flanges. Compatibility : -6mm thickness: 3.5kW and 6kW motors -8mm thickness: 15kW motor
13G stainless steel spokes custom length
1,45 € In StockWe can cut spokes at your convenience. Conventional rolled 18/8 stainless steel spoke with constant wire diameter from the head to the thread. 13G spokes (2,3mm diameter)
Cycle analsyt V3 PAS sensor
39,00 € In StockPas sensor for Cycle analyst V3 CA V3. Can be installed on left side or right side of your bike.
